Concept explainers
Continuation of Problems 8 and 37. Another explanation is that the stones move only when the water dumped on the playa during a storm freezes into a large, thin sheet of ice. The stones are trapped in place in the ice. Then, as air flows across the ice during a wind, the air-drag forces on the ice and stones move them both, with the stones gouging out the trails. The magnitude of the air-drag force on this horizontal “ice sail” is given by Dice = 4CiceρAicev2, where Cice is the drag coefficient (2.0 × 10−3), ρ is the air density (1.21 kg/m3), Aice is the horizontal area of the ice, and v is the wind speed along the ice.
Assume the following: The ice sheet measures 400 m by 500 m by 4.0 mm and has a coefficient of kinetic friction of 0.10 with the ground and a density of 917 kg/m3. Also assume that 100 stones identical to the one in Problem 8 are trapped in the ice. To maintain the motion of the sheet, what are the required wind speeds (a) near the sheet and (b) at a height of 10 m? (c) Are these reasonable values for high-speed winds in a storm?
Trending nowThis is a popular solution!
Chapter 6 Solutions
Fundamentals of Physics Extended
Additional Science Textbook Solutions
Cosmic Perspective Fundamentals
Human Physiology: An Integrated Approach (8th Edition)
Campbell Biology (11th Edition)
Living By Chemistry: First Edition Textbook
Introductory Chemistry (6th Edition)
Physics for Scientists and Engineers: A Strategic Approach, Vol. 1 (Chs 1-21) (4th Edition)
- Callie is running a 400 m race around a 400 m track. On the backstretch her velocity is 8 m/s, but she is running into a 2 m/s headwind. How large is the drag force that acts on Callie? Assume that the density of the air is 1.2 kg/m3, that Callie’s cross-sectional area is 0.5 m2, and that her coefficient of drag is 1.1.arrow_forwardA ski that is placed on snow will stick to the snow. However, when the ski is moved along the snow, the rubbing warms and partially melts the snow, reducing the coefficient of kinetic friction and promoting sliding.Waxing the ski makes it water repellent and reduces friction with the resulting layer of water. A magazine reports that a new type of plastic ski is especially water repellent and that, on a gentle 200 m slope in the Alps, a skier reduced his top-to-bottom time from 61 s with standard skis to 42 s with the new skis. Determine the magnitude of his average acceleration with (a) the standard skis and (b) the new skis. Assuming a 3.0 slope, compute the coefficient of kinetic friction for (c) the standard skis and (d) the new skisarrow_forwardEstimate the speed at which the drag on a 150-g steel ball becomes equal to about 1% of its weight. (The density of steel is about 7900 kg/m3, and C for a sphere is about equal to 0.5.) Take the density of air to be 1.2 kg/m3. The speed is m/s. 34. A space probe near the earth has values of E, L, and m such that L/m = 7.5 × 1010 m2/s and 2E/m = 0. Find the eccentricity of this orbit and the radius of the closest point of the orbit to the earth, and classify the orbit as elliptical, parabolic, or hyperbolic. The eccentricity of the orbit is______ and the orbit is ______Choose one (.Elliptical, Parabolic, Hyperbolic) The radius of the closest point of the orbit to the earth is _______ km.arrow_forward
- A ski that is placed on snow will stick to the snow. However, when the ski is moved along the snow, the rubbing warms and partially melts the snow, reducing the coefficient of friction and promoting sliding. Waxing the ski makes it water repellent and reduces friction with the resulting layer of water. A magazine reports that a new type of plastic ski is especially water repellent and that, on a gentle 230 m slope in the Alps, a skier reduced his top-to-bottom time from 69 s with standard skis to 42 s with the new skis. Old skis acceleration = 0.097 m/s2 New skis acceleration = 0.26 m/s2 Assuming a 3.0° slope, compute the coefficient of kinetic friction for each case. Old skis _______ New skis _______arrow_forwardA person pushes a large block on a horizontal ice surface in a straight line to the right with constant speed, as shown above. The mass of the block is 10�� and frictional forces between the block and the ice are negligible. However, the block has a wide cross-sectional area such that air resistance acting on the block cannot be neglected. The opposite is true for the person: air resistance on the person is negligible, but the person’s shoes do not slip on the ice. The table shows the force exerted by the person on the block for several values of constant speed.arrow_forwardAn early submersible craft for deep-sea exploration was raised and lowered by a cable from a ship. When the craft was stationary, the tension in the cable was 6500 N. When the craft was lowered or raised at a steady rate, the motion through the water added an 1800 N drag force. What was the tension in the cable when the craft was being lowered to the seafloor?arrow_forward
- After emergencies with major blood loss, a patient is placed in the Trendelenburg position, in which the foot of the bed is raised to get maximum blood flow to the brain. If the coefficient of static friction between a typical patient and the bedsheets is 1.20, what is the maximum angle at which the bed can be tilted with respect to the floor before the patient begins to slide?arrow_forwardA horizontal force of 800 N is needed to overcome the force of static friction between a level floor and a 200-kg crate. If g = 9.8 m/s2 , what is the coefficient of static friction?arrow_forwardRunning on a treadmill is slightly easier than running outside because there is no drag force to work against. Suppose a 60 kg runner completes a 5.0 km race in 19 minutes. The density of air is 1.20 kg/m3 Determine the drag force on the runner during the race. Suppose that the runner has the cross section area of 0.72 m2 and the drag coefficient of 1.2. What is this force as a fraction of the runner's weight?arrow_forward
- F45arrow_forwardTwo blocks are positioned on surfaces, each inclined at the same angle of 40.9 degrees with respect to the horizontal. The blocks are connected by a rope which rests on a frictionless pulley at the top of the inclines as shown, so the blocks can slide together. The mass of the black block is 2.37 kg, and the coefficient of kinetic friction for both blocks and inclines is 0.500. Assume static friction has been overcome and that everything can slide. What is must be the mass of the white block if both blocks are to slide to the LEFT at an acceleration of 1.5 m/s^2? 0.87 kg 22.68 kg 11.66 kg 0.96 kgarrow_forwardA steel cable lying flat on the floor drags a 30 kg block across a horizontal, frictionless floor. A 200 N force applied to the cable causes the block to reach a speed of 6 m/s in a distance of 3 m. Determine the mass of the cable.arrow_forward
- Physics for Scientists and Engineers: Foundations...PhysicsISBN:9781133939146Author:Katz, Debora M.Publisher:Cengage LearningClassical Dynamics of Particles and SystemsPhysicsISBN:9780534408961Author:Stephen T. Thornton, Jerry B. MarionPublisher:Cengage Learning