The IUPAC name for the alcohol has to be assigned. Concept Introduction: IUPAC rules for naming alcohols that contain single hydroxyl group: • Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane. • The numbering has to be given so that the hydroxyl group gets the least numbering. • Name and location of any other substituent present in the chain has to be identified. • If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering. • Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group. • If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer. • In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer. IUPAC rules for naming alcohols that contain more than one hydroxyl group: • The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

Question

Want to see more full solutions like this?

Answer 1

Question

Chapter 14, Problem 14.28EP

(a)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(a)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 1

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on opposite side of the double bond and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 2

Conclusion

IUPAC name for the given alcohol is trans-2-penten-1-ol.

(b)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(b)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 3

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom and the double bond between second and third carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on same side of the double bond and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 4

Conclusion

IUPAC name for the given alcohol is cis-2-penten-1-ol.

(c)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(c)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-methylcyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 5

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a methyl group is present in the second position. Therefore, the name of the given alcohol can be given as 2-methylcyclohexanol.

Looking for the stereochemistry, the given structure has substituents on above and below the ring of carbon atoms and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-methylcyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 6

Conclusion

IUPAC name for the given alcohol is trans-2-methylcyclohexanol.

(d)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(d)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-3-bromocyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 7

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a bromo is present in the third position. Therefore, the name of the given alcohol can be given as 3-bromocyclohexanol.

Looking for the stereochemistry, the given structure has substituents on same side the ring of carbon atoms and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-3-bromocyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 8

Conclusion

IUPAC name for the given alcohol is cis-3-bromocyclohexanol.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Students have asked these similar questions

unu grow because auxin is still produced in the tip to Another of Boysen and Jensen's experiments included the use of mica, explain why one of the shoots was able to show phototropism and the other was not. Mica Wafer Ligh c. They then t but this time permeable n shoot. Why phototropis Light Mica Wafer Coleoptile tips Tips removed: agar Explain why the shoo direction after the ag the cut shoot, even t

Discussion entries must be at least 250 words to fulfill the assignment requirements. You must complete your entry before you will be able to see the responses of other students. Responses to other students are encouraged but not required. Grading for discussion entries will be based on application of course concepts, proper grammar, and correct punctuation. Read one the attached article and explore the Human Development Index (https://hdr.undp.org/data-center/human-development-index#/indicies/HDI). In your opinion, is the Human Development Index a good measure of the well- being of the people of a nation? Are the items measured in the HDI valid and relevant in the modern global economy? How are they related to the political economy of a nation? The attached articles propose some alternative measures of well-being. In your opinion, are there other measures of well-being that might be better alternatives to the items in the current HDI?

A patient visits her doctor with symptoms typical of a bladder infection. She is immediately prescribed an 800 mgdose of antibiotic (bioavailability = 1/2, t½ = 12 h). The corresponding plasma concentration of drug is found to be 96 micrograms/ml. What is the volume of distribution of this drug? Please round to the nearest liter.

Answer 2

Question

Chapter 14, Problem 14.28EP

(a)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(a)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 1

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on opposite side of the double bond and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 2

Conclusion

IUPAC name for the given alcohol is trans-2-penten-1-ol.

(b)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(b)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 3

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom and the double bond between second and third carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on same side of the double bond and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 4

Conclusion

IUPAC name for the given alcohol is cis-2-penten-1-ol.

(c)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(c)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-methylcyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 5

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a methyl group is present in the second position. Therefore, the name of the given alcohol can be given as 2-methylcyclohexanol.

Looking for the stereochemistry, the given structure has substituents on above and below the ring of carbon atoms and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-methylcyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 6

Conclusion

IUPAC name for the given alcohol is trans-2-methylcyclohexanol.

(d)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(d)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-3-bromocyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 7

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a bromo is present in the third position. Therefore, the name of the given alcohol can be given as 3-bromocyclohexanol.

Looking for the stereochemistry, the given structure has substituents on same side the ring of carbon atoms and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-3-bromocyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 8

Conclusion

IUPAC name for the given alcohol is cis-3-bromocyclohexanol.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 3

Question

Chapter 14, Problem 14.28EP

(a)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(a)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 1

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on opposite side of the double bond and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 2

Conclusion

IUPAC name for the given alcohol is trans-2-penten-1-ol.

(b)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(b)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 3

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom and the double bond between second and third carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on same side of the double bond and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 4

Conclusion

IUPAC name for the given alcohol is cis-2-penten-1-ol.

(c)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(c)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-methylcyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 5

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a methyl group is present in the second position. Therefore, the name of the given alcohol can be given as 2-methylcyclohexanol.

Looking for the stereochemistry, the given structure has substituents on above and below the ring of carbon atoms and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-methylcyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 6

Conclusion

IUPAC name for the given alcohol is trans-2-methylcyclohexanol.

(d)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(d)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-3-bromocyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 7

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a bromo is present in the third position. Therefore, the name of the given alcohol can be given as 3-bromocyclohexanol.

Looking for the stereochemistry, the given structure has substituents on same side the ring of carbon atoms and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-3-bromocyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 8

Conclusion

IUPAC name for the given alcohol is cis-3-bromocyclohexanol.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 4

Question

Chapter 14, Problem 14.28EP

(a)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(a)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 1

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on opposite side of the double bond and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 2

Conclusion

IUPAC name for the given alcohol is trans-2-penten-1-ol.

(b)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(b)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 3

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom and the double bond between second and third carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on same side of the double bond and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 4

Conclusion

IUPAC name for the given alcohol is cis-2-penten-1-ol.

(c)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(c)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-methylcyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 5

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a methyl group is present in the second position. Therefore, the name of the given alcohol can be given as 2-methylcyclohexanol.

Looking for the stereochemistry, the given structure has substituents on above and below the ring of carbon atoms and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-methylcyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 6

Conclusion

IUPAC name for the given alcohol is trans-2-methylcyclohexanol.

(d)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(d)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-3-bromocyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 7

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a bromo is present in the third position. Therefore, the name of the given alcohol can be given as 3-bromocyclohexanol.

Looking for the stereochemistry, the given structure has substituents on same side the ring of carbon atoms and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-3-bromocyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 8

Conclusion

IUPAC name for the given alcohol is cis-3-bromocyclohexanol.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!

Answer 5

Chapter 14, Problem 14.28EP

(a)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(a)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 1

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on opposite side of the double bond and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 2

Conclusion

IUPAC name for the given alcohol is trans-2-penten-1-ol.

(b)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(b)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 3

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom and the double bond between second and third carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on same side of the double bond and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 4

Conclusion

IUPAC name for the given alcohol is cis-2-penten-1-ol.

(c)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(c)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-methylcyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 5

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a methyl group is present in the second position. Therefore, the name of the given alcohol can be given as 2-methylcyclohexanol.

Looking for the stereochemistry, the given structure has substituents on above and below the ring of carbon atoms and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-methylcyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 6

Conclusion

IUPAC name for the given alcohol is trans-2-methylcyclohexanol.

(d)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(d)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-3-bromocyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 7

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a bromo is present in the third position. Therefore, the name of the given alcohol can be given as 3-bromocyclohexanol.

Looking for the stereochemistry, the given structure has substituents on same side the ring of carbon atoms and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-3-bromocyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 8

Conclusion

IUPAC name for the given alcohol is cis-3-bromocyclohexanol.

Answer 6

Chapter 14, Problem 14.28EP

(a)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(a)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 1

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on opposite side of the double bond and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 2

Conclusion

IUPAC name for the given alcohol is trans-2-penten-1-ol.

Answer 7

Chapter 14, Problem 14.28EP

(a)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

Answer 8

(a)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-penten-1-ol.

Answer 9

(a)

Expert Solution

Answer 10

(a)

Expert Solution

Answer 11

Expert Solution

Answer 12

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 1

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on opposite side of the double bond and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 2

Answer 13

Conclusion

IUPAC name for the given alcohol is trans-2-penten-1-ol.

Answer 14

(b)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(b)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-2-penten-1-ol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 3

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom and the double bond between second and third carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on same side of the double bond and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 4

Conclusion

IUPAC name for the given alcohol is cis-2-penten-1-ol.

Answer 15

(b)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

Answer 16

(b)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-2-penten-1-ol.

Answer 17

(b)

Expert Solution

Answer 18

(b)

Expert Solution

Answer 19

Expert Solution

Answer 20

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 3

The longest carbon chain in the above structure with the hydroxyl group is found to be a five carbon chain. Hence, the parent alkane is pentane. As there is a double bond present in the carbon chain, the name is converted as pentene. The hydroxyl group is found to be present on first carbon atom and the double bond between second and third carbon atom. Therefore, the name of the given alcohol can be given as 2-penten-1-ol.

Looking for the stereochemistry, the given structure has bulky group on same side of the double bond and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-2-penten-1-ol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 4

Answer 21

Conclusion

IUPAC name for the given alcohol is cis-2-penten-1-ol.

Answer 22

(c)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(c)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-methylcyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 5

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a methyl group is present in the second position. Therefore, the name of the given alcohol can be given as 2-methylcyclohexanol.

Looking for the stereochemistry, the given structure has substituents on above and below the ring of carbon atoms and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-methylcyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 6

Conclusion

IUPAC name for the given alcohol is trans-2-methylcyclohexanol.

Answer 23

(c)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

Answer 24

(c)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is trans-2-methylcyclohexanol.

Answer 25

(c)

Expert Solution

Answer 26

(c)

Expert Solution

Answer 27

Expert Solution

Answer 28

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 5

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a methyl group is present in the second position. Therefore, the name of the given alcohol can be given as 2-methylcyclohexanol.

Looking for the stereochemistry, the given structure has substituents on above and below the ring of carbon atoms and hence this is a trans isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is trans-2-methylcyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 6

Answer 29

Conclusion

IUPAC name for the given alcohol is trans-2-methylcyclohexanol.

Answer 30

(d)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

(d)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-3-bromocyclohexanol.

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 7

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a bromo is present in the third position. Therefore, the name of the given alcohol can be given as 3-bromocyclohexanol.

Looking for the stereochemistry, the given structure has substituents on same side the ring of carbon atoms and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-3-bromocyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 8

Conclusion

IUPAC name for the given alcohol is cis-3-bromocyclohexanol.

Answer 31

(d)

Interpretation Introduction

Interpretation:

The IUPAC name for the alcohol has to be assigned.

Concept Introduction:

IUPAC rules for naming alcohols that contain single hydroxyl group:

• Longest carbon chain has to be identified that contains hydroxyl group also. The chain name is obtained by replacing the letter “-e” in alkane with “-ol”. If the compound contains a unsaturated bond, then the respective name has to be changed with regard to alkane.

• The numbering has to be given so that the hydroxyl group gets the least numbering.

• Name and location of any other substituent present in the chain has to be identified.

• If in a ring the hydroxyl group is present, then that carbon is numbered 1 and the numbering then proceeds counterclockwise or clockwise in a way that substituents present if any gets the least numbering.

• Hydroxyl group as a substituent in a molecule is named as hydroxy group rather than hydroxyl group.

• If the compound contains bulky groups on same side of the double bond, then it is a cis isomer and if the bulkyl groups are present on opposite side of the double bond, then it is a trans isomer.

• In case of cycloalkane compounds, if the substitutions are present on same side of the ring of carbon atoms, it is a cis isomer. If the substitutions are present above and below the ring, then it is a trans isomer.

IUPAC rules for naming alcohols that contain more than one hydroxyl group:

• The same rules said above is followed but the prefix di-, tri-, tetra etc is added corresponding to the number of hydroxyl groups that is present.

Answer 32

(d)

Expert Solution

Answer to Problem 14.28EP

The IUPAC name of the given alcohol is cis-3-bromocyclohexanol.

Answer 33

(d)

Expert Solution

Answer 34

(d)

Expert Solution

Answer 35

Expert Solution

Answer 36

Explanation of Solution

Given structure of alcohol is,

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 7

The longest carbon chain in the above structure with the hydroxyl group is found to be a six carbon cyclic chain. Hence, the parent cycloalkane is cyclohexane. As a hydroxyl group is present in the ring, the name can be given as cyclohexanol. Looking for the substituents present in the ring, it is found that a bromo is present in the third position. Therefore, the name of the given alcohol can be given as 3-bromocyclohexanol.

Looking for the stereochemistry, the given structure has substituents on same side the ring of carbon atoms and hence this is a cis isomer. This has to be included in the IUPAC name. Therefore, IUPAC name of the given compound is cis-3-bromocyclohexanol.

Bundle: General, Organic, and Biological Chemistry, 7th + OWLv2 Quick Prep for General Chemistry, 4 terms (24 months) Printed Access Card, Chapter 14, Problem 14.28EP , additional homework tip 8