A timber pile of length 8m and diameter of 0.2m is driven with a 20 kN drop hammer, falling freely from a height of 1.5m. The total penetration of the pile in the last 5 blows is 40 mm. Use the engineering news record expression. Assume a factor of safety of 6 and empirical factor (allowing reducing in the theoretical set, due to energy losses) of 2.5 cm. The safe load carrying capacity of the pile

A timber pile of length 8m and diameter of 0.2m is driven with a 20 kN drop hammer, falling freely from a height of 1.5m. The total penetration of the pile in the last 5 blows is 40 mm. Use the engineering news record expression. Assume a factor of safety of 6 and empirical factor (allowing reducing in the theoretical set, due to energy losses) of 2.5 cm. The safe load carrying capacity of the pile

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Soil.
A 16 in diameter, 75 ft long drilled displacement pile is made of grout with f'c = 5,000 lb/in2. A steel ratio of 0.04 is to be used in the upper 30 ft, and a steel ratio of 0.001 for the remainder of the pile. Compute the modulus of elasticity for the upper and lower portions of this pile.
A timber pile of length 8m and diameter of 0.2m is driven with a 20 KN drop hammer, falling freely from a height of 1.5 m. The total penetration of the pile in the last 5 blows is 40mm. Use the Engineering News Record expression. Assume a factor of safety of 6 and empirical factor Callowing reducing in the theoretical set, due to energy losses) of 2.5 cm. The safe Load carrying capacity of the pile (in KN, round off to 2 decimal places) is
None
63.A timber pile of length 8m and diameter of 0.2m is driven with a 20 kN drop hammer, falling freely from a height of 1.5m. The total penetration of the pile in the last 5 blows is 40 mm. Use the engineering news record expression. Assume a factor of safety of 6 and empirical factor (allowing reducing in the theoretical set, due to energy losses) of 2.5 cm. The safe load carrying capacity of the pile
ge 4 Please round to the nearest Hundredth (i.e., 0.01). No Comma! A square pile, 26 m long is driven into a homogeneous sand layer. The pile's width (diameter) is 0.2 m. The standard penetration resistance near the vicinity of the pile is 17. Calculate the allowable bearing force (Qa) of the pile. Use FS = 3 and Briaud & Tucker method. Hint: Qa= Qu/FS Qa = kN S D F G H J Finish attempt... K
Using Engineering News formula, the allowable Load (Q) of a wooden pile hammered with a drop hammer (W = 30 kN), having free fall (H) 1.5 m, penetration in last blow (S) 5 mm, using empirical constant (C) as 2,5 and factor of safety as 6, will be
Please solve it in 30 minutes
Two different single acting hammers are being considered for an open- ended pipe pile. Hammer A has a ram weight of 30 kN and a stroke of 3 m. Hammer B has a ram weight of 15 kN and stroke of 5 m. Both hammers use similar appurtenances. Which hammer will deliver the most energy to the pile? Which hammer will generate the highest stresses in the pile?
A square prestressed concrete pile with a 14 inch side is to be driven to the necessary depth. It needs to be able to support 105 kips. It has been determined that the point resistance qp is 120 ksf and the side friction fs is 450 psf. Use formula 12.2 (see attached image) to estimate how long the pile needs to be with a factor of safety of at least 2.5. Round your answer to a multiple of 5 feet. Use L as a variable to calculate the load in formula 12.2. L can be obtained from this equation.
Q.19 A single pile, 60 cm in diameter and 15 m long, is driven in clay having an average unconfined compressive strength of 120 kN/m². The ultimate load carrying capacity of the pile, assume shear mobilization factor 0.75 around the pile.
Q- A precast concrete pile is driven with a 50 KN hammer falling through a height of 1.0 m with an efficiency of 0.6. The set value observed is 4 mm per blow and the combined temporary compression of the pile, cushion and the ground is 6 mm. As per Modified Hiley Formula, find the ultimate resistance of the pile.