Costs-of-quality analysis. Safe Travel produces car seats for children from newborn to 2 years old. Safe Travel’s only problem with its car seats was stitching in the straps. The problem can usually be detected and repaired during an internal inspection. Inspection costs $5.00 per car seat, and repairs cost $1.00 per car seat. All 200,000 car seats were inspected last year, and 5% were found to have problems with the stitching. Another 1% of the 200,000 car seats had problems with the stitching, but the internal Inspection did not discover them. Defective units that were sold and shipped to customers are shipped back to Safe Travel and repaired. Shipping costs are $8.00 per car seat, and repair costs are $1.00 per car seat. Negative publicity will result in a loss of future contribution margin of $100 for each external failure.
- 1. Identify total costs of quality by category (appraisal, internal failure, and external failure).
- 2. Safe Travel is concerned with the high up-front cost of Inspecting all 200,000 units. It Is considering an alternative internal Inspection plan that will cost only $3.00 per car seat inspected. During the internal inspection, the alternative technique will detect only 3.5% of the 200,0 car seats that have stitching problems. The other 2.5% will be detected after the car seats are sold and shipped. What are the total costs of quality for the alternative technique?
- 3. What factors other than cost should Safe Travel consider before changing inspection techniques?
Want to see the full answer?
Check out a sample textbook solutionChapter 19 Solutions
Horngren's Cost Accounting: A Managerial Emphasis (16th Edition)
- Safe Travel produces car seats for children from newborn to 2 years old. The company is worried because one of its competitors has recently come under public scrutiny because of product failure. Historically, Safe Travel's only problem with its car seats was stitching in the straps. The problem can usually be detected and repaired during an internal inspection. The cost of the inspection is $5.00 per car seat, and the repair cost is $1.00 per car seat. All 200,000 car seats were inspected last year, and 5% were found to have problems with the stitching in the straps during the internal inspection. Another 1% of the 200,000 car seats had problems with the stitching, but the internal inspection did not discover them. Defective units that were sold and shipped to customers needed to be shipped back to Safe Travel and repaired. Shipping costs are $8.00 per car seat, and repair costs are $1.00 per car seat. However, the out-of-pocket costs (shipping and repair) are not the only costs of…arrow_forwardSupreme Furniture needs to purchase glass panes to make glass top coffee tables. Last year Supreme Furniture has two suppliers, Bobux and Twinkle, with the following supplier related information: Cost per unit of Number of activities Number of activities activity driver for Bobux Supplier related activities Returning poor quality glass panes $120 per pane 25 panes Processing purchase orders Receiving and inspecting deliveries S50 per delivery 15 deliveries Supplier audit Rework due to poor quality glass $100 per table 60 tables Purchase price per glass pane for Twinkle 12 panes 40 orders 15 deliveries 2 audits 15 tables $150 780 $20 per order 12 orders $1000 per audit 5 audits $100 Number of glass panes purchased 446 Calculate the supplier performance index of Bobux (round your answer to 2 decimal places). Answer.arrow_forwardNeed help with this practice problemarrow_forward
- Which costs of quality category are managers focusing on? Why?arrow_forwardHving an issue with this problem, Thank you.arrow_forwardTidyCar washes vehicles using a nohands approach. Business is good but Jonathan, the manager, has noticed that customers complain because there are streaks on their vehicles at pickup. TidyCar warrants that each vehicle will sparkle at delivery and charges $25 for each vehicle. TidyCar washes 100 vehicles each day and last month, 40% of them required a hand finish. Each hand wash costs $15. Jonathan believes the problem can be eliminated by a prewash (costing $2 per vehicle) and an equipment calibration at the start of each day, which will reduce the number of vehicles washed each day by 10, but will decrease the vehicles requiring a hand finish from 40% to 10%. Q. Should TidyCar implement Jonathan’s idea? Show your calculationsarrow_forward
- TidyCar washes vehicles using a nohands approach. Business is good but Jonathan, the manager, has noticed that customers complain because there are streaks on their vehicles at pickup. TidyCar warrants that each vehicle will sparkle at delivery and charges $25 for each vehicle. TidyCar washes 100 vehicles each day and last month, 40% of them required a hand finish. Each hand wash costs $15. Jonathan believes the problem can be eliminated by a prewash (costing $2 per vehicle) and an equipment calibration at the start of each day, which will reduce the number of vehicles washed each day by 10, but will decrease the vehicles requiring a hand finish from 40% to 10%. Q. What nonfinancial and qualitative factors should TidyCar consider in deciding whether to implement the new design?arrow_forwardDurant Company manufactures glass bottles for dairy products. The contribution margin is $0.42 per bottle. Durant just received notification that one of its orders for 180,000 bottles contained misprinted labels, and thus it had to recall and reprint the bottle labels. If it will cost $0.37 per bottle to reprint the labels and $1,000 to reship the bottles, what will the net contribution margin be after the recall?arrow_forwardMess Free Litter, Inc. (MFL) recently patented its new electronic and remote-controlled litter box. Research indicates that the scooping of the litter is the task most abhorred by cat owners. MFL's new product automatically "scoops" and fills the pan with fresh litter from the reservoir. MFL has budgeted 23,500 units for production and sales in the first year of operation. Practical capacity is 58,750 units. Variable manufacturing costs per unit are as follows:arrow_forward
- Bienestar, Inc., has two plants that manufacture a line of wheelchairs. One is located in Kansas City, and the other in Tulsa. Each plant is set up as a profit center. During the past year, both plants sold their tilt wheelchair model for 1,620. Sales volume averages 20,000 units per year in each plant. Recently, the Kansas City plant reduced the price of the tilt model to 1,440. Discussion with the Kansas City manager revealed that the price reduction was possible because the plant had reduced its manufacturing and selling costs by reducing what was called non-value-added costs. The Kansas City manufacturing and selling costs for the tilt model were 1,260 per unit. The Kansas City manager offered to loan the Tulsa plant his cost accounting manager to help it achieve similar results. The Tulsa plant manager readily agreed, knowing that his plant must keep pacenot only with the Kansas City plant but also with competitors. A local competitor had also reduced its price on a similar model, and Tulsas marketing manager had indicated that the price must be matched or sales would drop dramatically. In fact, the marketing manager suggested that if the price were dropped to 1,404 by the end of the year, the plant could expand its share of the market by 20 percent. The plant manager agreed but insisted that the current profit per unit must be maintained. He also wants to know if the plant can at least match the 1,260 per-unit cost of the Kansas City plant and if the plant can achieve the cost reduction using the approach of the Kansas City plant. The plant controller and the Kansas City cost accounting manager have assembled the following data for the most recent year. The actual cost of inputs, their value-added (ideal) quantity levels, and the actual quantity levels are provided (for production of 20,000 units). Assume there is no difference between actual prices of activity units and standard prices. Required: 1. Calculate the target cost for expanding the Tulsa plants market share by 20 percent, assuming that the per-unit profitability is maintained as requested by the plant manager. 2. Calculate the non-value-added cost per unit. Assuming that non-value-added costs can be reduced to zero, can the Tulsa plant match the Kansas City per-unit cost? Can the target cost for expanding market share be achieved? What actions would you take if you were the plant manager? 3. Describe the role that benchmarking played in the effort of the Tulsa plant to protect and improve its competitive position.arrow_forwardA company currently using an inspection process in its material receiving department is trying to install an overall cost reduction program. One possible reduction is the elimination of one inspection position. This position tests material that has defective content on an average of 0.04. By inspecting all items, the inspector is able to remove all defects. The inspector can inspect 50 units per hour. The hourly rate including fringe benefits for this position is $9. If the inspection position is eliminated, defects will go into the product assembly and will have to be replaced later at a cost of $10 each when they are detected in final product testing. (Answer in Appendix D)a. Should this inspection position be eliminated?b. What is the cost to inspect each unit?c. Is there a benefit (or loss) from the current inspection process? How much?arrow_forwardThe printing department is considering buying 10,000 additional rolls of gray cloth from an outside supplier at $2,000 per roll, which is much higher than Dover’s cost of weaving the roll. The printing department expects that 10% of the rolls obtained from the outside supplier will result in defective products. Should the printing department buy the gray cloth from the outside supplier? Show your calculations.arrow_forward
- Cornerstones of Cost Management (Cornerstones Ser...AccountingISBN:9781305970663Author:Don R. Hansen, Maryanne M. MowenPublisher:Cengage Learning