Concept explainers
n-Octane [C8H18(l)] is burned in the constant-pressure combustor of an aircraft engine with 70 percent excess air. Air enters this combustor at 600 kPa and 327°C, liquid fuel is injected at 25°C, and the products of combustion leave at 600 kPa and 1227°C. Determine the entropy generation and exergy destruction per unit mass of fuel during this combustion process. Take T0 = 25°C.
(a)
The entropy generation from the combustion chamber per unit mass of fuel.
Answer to Problem 92P
The entropy generation from the combustion chamber per unit mass of fuel is
Explanation of Solution
Write the energy balance equation using steady-flow equation.
Here, the total energy entering the system is
Substitute
Here, the enthalpy of formation for product is
Calculate the molar mass of the
Here, the number of carbon atoms is
Write the expression for entropy generation during this process.
Write the combustion equation of Equation (IV)
Here, the entropy of the product is
Determine the entropy at the partial pressure of the components.
Here, the partial pressure is
Write the expression for exergy destruction during this process.
Here, the thermodynamic temperature of the surrounding is
Determine the entropy generation per unit mass of the fuel.
Conclusion:
Perform unit conversion of temperature at state 1 from degree Celsius to Kelvin.
For air temperature enter in the combustion chamber,
For then liquid injected temperature in the combustion chamber,
For air temperature exit in the combustion chamber,
Write the combustion equation of 1 kmol for
Here, liquid octane is
Express the stoichiometric coefficient of air by
Substitute
Refer Appendix Table A-18, A-19, A-20, and A-23, obtain the enthalpy of formation, at 298 K, 600 K, and 1500 K for
Substance | ||||
-249,950 | --- | --- | --- | |
0 | 8682 | 17,929 | 49,292 | |
0 | 8669 | 17,563 | 47,073 | |
-241,820 | 9904 | --- | 57,999 | |
-393,520 | 9364 | --- | 71,078 |
Refer Equation (X), and write the number of moles of reactants.
Here, number of moles of reactant octane, oxygen and nitrogen is
Refer Equation (X), and write the number of moles of products.
Here, number of moles of product carbon dioxide, water, oxygen and nitrogen is
Substitute the value of substance in Equation (II).
Therefore the heat transfer for
Substitute 8 for
Refer Equation (VI) for reactant and product to calculation the entropy in tabular form as:
For reactant entropy,
Substance |
(T, 1 atm) | ||||
1 | --- | 466.73 | 14.79 | 451.94 | |
21.25 | 0.21 | 226.35 | 1.81 | 4771.48 | |
79.9 | 0.79 | 212.07 | 12.83 | 15,919.28 | |
For product entropy,
Substance |
(T, 1 atm) | ||||
8 | 0.0757 | 292.11 | -6.673 | 2390.26 | |
9 | 0.0852 | 250.45 | -5.690 | 2305.26 | |
8.75 | 0.0828 | 25.97 | -5.928 | 2309.11 | |
79.9 | 0.7563 | 241.77 | 12.46 | 18,321.87 | |
Substitute
Substitute
Substitute
Thus, the entropy generation from the combustion chamber per unit mass of fuel is
(b)
The exergy destruction from the combustion chamber per unit mass of fuel.
Answer to Problem 92P
The exergy destruction from the combustion chamber per unit mass of fuel is
Explanation of Solution
Determine the exergy destruction from the combustion chamber per unit mass of the fuel.
Conclusion:
Substitute
Thus, the exergy destruction from the combustion chamber per unit mass of fuel is
Want to see more full solutions like this?
Chapter 15 Solutions
CONNECT FOR THERMODYNAMICS: AN ENGINEERI
- Liquid propane (C3H8) enters a combustion chamber at 25°C at a rate of 0.05 kg/min where it is mixed and burned with 50 percent excess air that enters the combustion chamber at 7°C. An analysis of the combustion gases reveals that all the hydrogen in the fuel burns to H2O but only 90 percent of the carbon burns to CO2, with the remaining 10 percent forming CO. If the exit temperature of the combustion gases is 1500 K, determine 1-The balanced chemical equation for the actual process 2-Air- Fuel ratio 3-The mass flow rate of airarrow_forwardQ1. Propane (C3H8) gas enters a steady-flow adiabatic combustion chamber at 25°℃ and 1 atm. It is burned with 300 percent excess air that also enters at 25°C and 1 atm. Assuming complete combustion, determine (a) the temperature of the products, (b) the entropy generation, and (c) the reversible work and exergy destruction. Assume that To = 298 K and the products leave the combustion chamber at 1 atm pressure.arrow_forwardThe gas mixture formed as a result of the combustion of the stoichiometric mixture consisting of methane (CH4) and humid air reaches a temperature of 1500 K and a pressure of 80 bar. In this case, calculate the specific entropy value of the products on a molar and mass basis. Take the specific humidity of the humid air as 0.01 kg sb/kg Hk.arrow_forward
- Combustion products from a burner enter a gas turbine at 10 bar and 950°C and discharge at 1.5 bar. The turbine operates adiabatically with an efficiency of 77%. Assuming the combustion products to be an ideal-gas mixture with a heat capacity of 32 J mol−1 K−1, what is the work output of the turbine per mole of gas, and what is the temperature of the gases discharging from the turbine?arrow_forwardCalculate the enthalpy of combustion of propane C3H8 at 25 oC in both kJ/kg and kJ/mole under the following conditions:- 1- gaseous propane with H2O liquid in the products. 2- gaseous propane with H2O vapor in the products 3- liquid propane with H2O liquid in the products 4- liquid propane with H2O vapor in the products note: the enthalpy of evaporation of propane at 25 oC is 425 kJ/kgarrow_forwardIf one mole of air/fuel mixture (rigid diatomic gas) is initially at 20◦C, is compressed and expanded 7-fold as part of the Otto cycle, and 4 kJ of heat is generated by burning the air/fuel mixture, calculate: (i) the temperature after each stage of the Otto cycle; (ii) the heat absorbed/expelled during each stage of the cycle; and (iii) the efficiency of the Otto cycle.arrow_forward
- A volume of 10 m3 of air, at 20 ° C and 1 atm, contains 90% RH of acetone. Isothermal compression is carried out to a volume of 0.5 m3. The condensed acetone will burn at 25 ° C and 1 atm. The heat obtained will be used to evaporate refrigerant 134a at 200 kPa. Determine the mass of the refrigerant that can evaporate if all the heat that comes from the combustion of this acetone is used.arrow_forwardA gaseous fuel with 80% butane, 15% nitrogen and 5% oxygen (on a mole basis) is burned to completion with 120 percent theoretical air that enters the combustion chamber at 30°C and 100 kPa. Determine the volume flow rate of air required to burn fuel at a rate of 2 kg/min.arrow_forwardThe moist air at 30 C° and 50 % RH enters steady state dehumidifier at the rate of 280 m³/min. The air passes over a cooling coil and water vapour condenses. The saturated moist air exists at 10 C°. The condensate also leaves the dehumidifier at 10 C°. The pressure is atmospheric. Determine 1- The mass flow rate of dry air. 2- The rate at which water is condensed. 3- The required refrigerating capacity in ton of refrigeration.arrow_forward
- Liquid octane is burned steadily with air in a jet engine. If the air–fuel ratio is 18 kg air/kg fuel, determine the percentage of excess air used during this process.arrow_forwardEthane (C2H6) at 20oC and 200kPa and methane (CH4) at 45oC and 200kPa enter an adiabatic mixing chamber. The mass flow rate of ethane is 9kg/s which is twice the mass flow rate of methane .Determine the mixture temperature and pressure. Take the specific heats of C2H6=1.7662kJ/kg K, CH4=2.2537kJ/kg K.arrow_forwardUsing the steam tables, calculate the specific volume, internal energy, enthalpy, and entropy of H2O at 250oC with 25% moisture content.arrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY