THERMODYNAMICS-SI ED. EBOOK >I<
THERMODYNAMICS-SI ED. EBOOK >I<
9th Edition
ISBN: 9781307573022
Author: CENGEL
Publisher: MCG/CREATE
bartleby

Videos

Textbook Question
Book Icon
Chapter 15.7, Problem 114RP

Liquid octane (C8H18) enters a steady-flow combustion chamber at 25°C and 8 atm at a rate of 0.8 kg/min. It is burned with 200 percent excess air that is compressed and preheated to 500 K and 8 atm before entering the combustion chamber. After combustion, the products enter an adiabatic turbine at 1300 K and 8 atm and leave at 950 K and 2 atm. Assuming complete combustion and T0 = 25°C, determine (a) the heat transfer rate from the combustion chamber, (b) the power output of the turbine, and (c) the reversible work and exergy destruction for the entire process.

(a)

Expert Solution
Check Mark
To determine

The rate of heat transfer from the combustion chamber.

Answer to Problem 114RP

The rate of heat transfer from the combustion chamber is 770kJ/min_.

Explanation of Solution

Write the energy balance equation using steady-flow equation.

EinEout=ΔEsystem (I)

Here, the total energy entering the system is Ein, the total energy leaving the system is Eout, and the change in the total energy of the system is ΔEsystem.

Substitute 0 for Ein, Qout for Eout, and ΔU for ΔEsystem in Equation (I)

(0)Qout=ΔUQout=NP(h¯f°+h¯h¯°)PNR(h¯f°+h¯h¯°)RQout=NP(h¯f°+h¯1300Kh¯298K°)PNR(h¯f°+h¯500Kh¯298K°)R (II)

Here, the enthalpy of formation for product is h¯f,P°, the enthalpy of formation for reactant is h¯f,R°, the mole number of the product is NP, and the mole number of the reactant is NR.

Calculate the molar mass of the C8H18.

MC8H18=[(NC)(MC)+(NH)(MH)] (III)

Here, the number of carbon atoms is NC, the molar mass of the carbon is MC, the number of hydrogen atoms is NH, the molar mass of the hydrogen is MH.

Determine the rate of mole flow rates of the product.

N˙=m˙MC8H18 (IV)

Here, the mass flow rate is m˙ and the molar mass of the C8H18.

Determine the heat transfer rate from the combustion chamber.

Q˙out=N˙Qout (V)

Conclusion:

Perform unit conversion of temperature at state 1 from degree Celsius to Kelvin.

For air temperature enter in the combustion chamber,

Tenter=25°C=(25+273)K=298K

Write the combustion equation of 1 kmol for C8H18.

{C8H18(l)+3ath(O2+3.76N2)}{8CO2+9H2O+2athO2+(3)(3.76)athN2} (IX)

Here, liquid octane is C8H18, stoichiometric coefficient of air is ath, oxygen is O2, nitrogen is N2, carbon dioxide is CO2 and water is H2O.

Express the stoichiometric coefficient of air by O2 balancing.

3ath=8+4.5+2athath=12.5

Substitute 12.5 for ath in Equation (IX).

{C8H18(l)+(37.5)(O2+3.76N2)}{8CO2+9H2O+25O2+(141)N2} (X).

Refer Appendix Table A-18, A-19, A-20, and A-23, obtain the enthalpy of formation, at 298 K, 500 K, 950 K, and 1500 K for C8H18, O2, N2, H2O(g), and CO2 is given in a table (I) as:

Substanceh¯f°kJ/kmolh¯500KkJ/kmolh¯298KkJ/kmolh¯1300KkJ/kmolh¯950KkJ/kmol
C2H4(g)-249,950------------
O2014,770868242,03326,652
N2014,581866940,17028,501
H2O(g)-241,820---990448,80733,841
CO2-393,520---936459,55240,070

Refer Equation (X), and write the number of moles of reactants.

NR,C8H18=1kmolNR,O2=37.5kmolNR,N2=141kmol

Here, number of moles of reactant octane, oxygen and nitrogen is NR,C8H18,NR,O2andNR,N2 respectively.

Refer Equation (X), and write the number of moles of products.

NP,CO2=8kmolNP,H2O=9kmolNP,O2=25kmolNP,N2=141kmol

Here, number of moles of product carbon dioxide, water, oxygen and nitrogen is NP,CO2,NP,O2,NP,H2OandNP,N2 respectively.

Substitute the value from table (I) of substance in Equation (II).

Qout=[(8)(393,520kJ/kmolK+59,522kJ/kmolK9364kJ/kmolK)+(9)(241,820kJ/kmolK+48,807kJ/kmolK9904kJ/kmolK)+(25)(0+42,033kJ/kmolK8682kJ/kmolK)+(141)(0+40,170kJ/kmolK+8669kJ/kmolK)+(1)(249,950kJ/kmolK)(37.5)(0+14,770kJ/kmolK8682kJ/kmolK)(141)(0+14,581kJ/kmolK8669kJ/kmolK)]=109,675kJ/kmolK

Therefore the heat transfer for C8H18 is 109,675kJ/kmolK.

Substitute 8 for NC, 12kg/kmol for MC, 18 for NH, 1kg/kmol for MH in Equation (III).

MC8H18=[(8)(12)+(18)(1)]kg/kmol=[(96)+(18)]kg/kmol=114kg/kmol

Substitute 0.8kg/min for m˙ and 114kg/kmol for MC8H18 in Equation (IV).

N˙=(0.8kg/min)(114kg/kmol)=0.007018kmol/min

Substitute 0.007018kmol/min for N˙ and 109,675kJ/kmolK for Qout in Equation (V).

Q˙out=(0.007018kmol/min)(109,675kJ/kmolK)=770kJ/min

Thus, the rate of heat transfer from the combustion chamber is 770kJ/min_.

(b)

Expert Solution
Check Mark
To determine

The rate of power output of the turbine.

Answer to Problem 114RP

The rate of power output of the turbine is 262.6kW_.

Explanation of Solution

Determine the power output of the adiabatic turbine from the steady-flow energy balance equation for non-reacting gas mixture.

Wout=NP(h¯eh¯i)Wout=NP(h¯1300Kh¯950K) . (XI)

Determine the rate of work done of the adiabatic turbine.

W˙out=N˙×Wout (XII)

Conclusion:

Substitute the value from table (I) of substance in Equation (XI).

Wout=[(8)(59,522kJ/kmolK40,070kJ/kmolK)+(9)(48,807kJ/kmolK33,841kJ/kmolK)+(25)(42,033kJ/kmolK29,652kJ/kmolK)+(141)(40,170kJ/kmolK28,501kJ/kmolK)]=2,245,164kJ/kmolK

Substitute 0.007018kmol/min for N˙ and 2,245,164kJ/kmolK for Wout inn Equation (XII).

W˙out=(0.007018kmol/min)×(2,245,164kJ/kmolK)=15,756kJ/min=15,756kJ/min×(0.016667kW1kJ/min)=262.6kW

Thus, the rate of power output of the turbine is 262.6kW_.

(c)

Expert Solution
Check Mark
To determine

The exergy destruction rate from the combustion chamber.

The rate of reversible work done in the combustion chamber.

Answer to Problem 114RP

The exergy destruction rate from the combustion chamber is 251.3kW_.

The rate of reversible work done in the combustion chamber is 513.9kW_.

Explanation of Solution

Write the expression for entropy generation during this process.

Sgen=SPSR+QoutTsurr (XIII)

Write the combustion equation of Equation (VI)

Sgen=SPSR+QoutTsurrSgen=NPs¯PNRs¯R+QoutTsurr (XIV)

Here, the entropy of the product is s¯P, the entropy of the reactant is s¯R, the heat transfer for C8H18 is Qout, and the surrounding temperature is Tsurr.

Determine the entropy at the partial pressure of the components.

Si=Nis¯i(T,Pi)=Nis¯i°(T,P0)Ruln(yiPm) (XV).

Here, the partial pressure is Pi, the mole fraction of the component is yi, the total pressure of the mixture is Pm, and the universal gas constant is Ru.

Determine the entropy generation rate from the combustion chamber.

S˙gen=N˙Sgen (XVI)

Write the expression for exergy destruction during this process.

X˙destroyed=T0S˙gen (XVII)

Here, the thermodynamic temperature of the surrounding is T0

Determine the rate of the reversible work done of the combustion chamber.

W˙rev=W˙+X˙dest (XVIII)

Conclusion:

Refer Equation (XV) for reactant and product to calculation the entropy in tabular form as:

For reactant entropy,

SubstanceNiyi

s¯i°

(T, 1 atm)

Ruln(yiPm)Nis¯i
C8H1811.00360.7917.288360.79
O237.50.21220.5894.3138,110.34
N21410.79206.63015.32926,973.44
SR=35,427.28kJ/K

For product entropy,

SubstanceNiyi

s¯i°

(T, 1 atm)

Ruln(yiPm)Nis¯i
C8H1880.0437266.444-20.2602,293.63
H2O(l)90.0490230.499-19.2812,248.02
O2250.1366241.689-10.7876,311.90
N21410.7705226.3893.59531,413.93
SP=42,267.48kJ/K

Substitute 42,267.48kJ/K for SP, 35,427.28kJ/K for SR, 298K for Tsurr, and 109,675kJ/kmol for Qout in Equation (XIII).

Sgen=(42,267.48+35,427.28)kJ/K+109,675kJ/kmol298K=(262.6053)kJ/K+(368.0369)kJ/kmol=7208.237kJ/kmol

Substitute 0.007018kmol/min for N˙ and 7208.237kJ/kmol for Sgen in Equation (XVI).

S˙gen=(0.007018kmol/min)×(7208.237kJ/kmol)=50.587kJ/minK50.59kJ/minK

Substitute 298K for T0 and 50.59kJ/minK for S˙gen in Equation (XVII).

X˙destroyed=(298K)(50.59kJ/minK)=15075.82kJ/min=15075.82kJ/min×(0.016667kW1kJ/min)=251.26kW

             251.3kW

Thus, the exergy destruction rate from the combustion chamber is 251.3kW_.

Substitute 262.6kW for W˙ and 251.3kW for X˙dest in Equation (XVIII).

W˙rev=(262.6+251.3)kW=513.9kW

Thus, the rate of reversible work done in the combustion chamber is 513.9kW_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
A spring package with two springs and an external force, 200N. The short spring has a loin of 35 mm. Constantly looking for spring for short spring so that total compression is 35 mm (d). Known values: Long spring:                        Short spring:C=3.98 N/mm                    Lo=65mmLo=87.4mmF=c·fTotal compression is same for both spring.                             200 = (3.98(c1) × 35) + (c₂ × 35) 200 = 139.3 + 35c₂ 200 - 139.3 = 35c₂ 60.7 = 35c₂ c₂ = 60.7/35 Short spring (c₂) = 1.73 N/mm According to my study book, the correct answer is 4.82N/mm What is wrong with the calculating?
What is the reason for this composition?
Homework: ANOVA Table for followed design B AB Dr -1 -1 1 (15.18,12) 1 -1 -1 (45.48.51) -1 1 -1 (25,28,19) 1 1 (75.75,81)

Chapter 15 Solutions

THERMODYNAMICS-SI ED. EBOOK >I<

Ch. 15.7 - What does 100 percent theoretical air represent?Ch. 15.7 - Consider a fuel that is burned with (a) 130...Ch. 15.7 - What are the causes of incomplete combustion?Ch. 15.7 - Which is more likely to be found in the products...Ch. 15.7 - Methane (CH4) is burned with the stoichiometric...Ch. 15.7 - Prob. 16PCh. 15.7 - n-Butane fuel (C4H10) is burned with the...Ch. 15.7 - Prob. 18PCh. 15.7 - Propane (C3H8) is burned with 75 percent excess...Ch. 15.7 - Propane fuel (C3H8) is burned with 30 percent...Ch. 15.7 - In a combustion chamber, ethane (C2H6) is burned...Ch. 15.7 - Prob. 22PCh. 15.7 - Prob. 23PCh. 15.7 - Ethane (C2H6) is burned with 20 percent excess air...Ch. 15.7 - Octane (C8H18) is burned with 250 percent...Ch. 15.7 - Prob. 26PCh. 15.7 - A fuel mixture of 60 percent by mass methane (CH4)...Ch. 15.7 - Prob. 28PCh. 15.7 - A certain natural gas has the following volumetric...Ch. 15.7 - Prob. 30PCh. 15.7 - A gaseous fuel with a volumetric analysis of 45...Ch. 15.7 - Prob. 33PCh. 15.7 - The fuel mixer in a natural gas burner mixes...Ch. 15.7 - Prob. 35PCh. 15.7 - Prob. 36PCh. 15.7 - Determine the fuelair ratio when coal from...Ch. 15.7 - Prob. 38PCh. 15.7 - Prob. 39PCh. 15.7 - Prob. 40PCh. 15.7 - Prob. 41PCh. 15.7 - When are the enthalpy of formation and the...Ch. 15.7 - Prob. 43PCh. 15.7 - Prob. 44PCh. 15.7 - Prob. 45PCh. 15.7 - Prob. 46PCh. 15.7 - Prob. 48PCh. 15.7 - Repeat Prob. 1546 for liquid octane (C8H18).Ch. 15.7 - Ethane (C2H6) is burned at atmospheric pressure...Ch. 15.7 - Reconsider Prob. 1550. What minimum pressure of...Ch. 15.7 - Calculate the HHV and LHV of gaseous n-octane fuel...Ch. 15.7 - Prob. 53PCh. 15.7 - Consider a complete combustion process during...Ch. 15.7 - Prob. 56PCh. 15.7 - Prob. 57PCh. 15.7 - Prob. 58PCh. 15.7 - Propane fuel (C3H8) is burned with an airfuel...Ch. 15.7 - Prob. 60PCh. 15.7 - Prob. 61PCh. 15.7 - Prob. 62PCh. 15.7 - Octane gas (C8H18) at 25C is burned steadily with...Ch. 15.7 - Liquid ethyl alcohol [C2H5OH(l)] at 25C is burned...Ch. 15.7 - Prob. 66PCh. 15.7 - A gaseous fuel mixture that is 40 percent propane...Ch. 15.7 - A constant-volume tank contains a mixture of 120 g...Ch. 15.7 - Prob. 70PCh. 15.7 - Prob. 71PCh. 15.7 - Prob. 72PCh. 15.7 - A fuel is completely burned first with the...Ch. 15.7 - Prob. 74PCh. 15.7 - Prob. 75PCh. 15.7 - What is the adiabatic flame temperature of methane...Ch. 15.7 - Octane gas (C8H18) at 25C is burned steadily with...Ch. 15.7 - Acetylene gas (C2H2) at 25C is burned during a...Ch. 15.7 - Ethyl alcohol [C2H5OH(g)] is burned with 200...Ch. 15.7 - Prob. 81PCh. 15.7 - Prob. 82PCh. 15.7 - Reconsider Prob. 1582. The combustion products are...Ch. 15.7 - Express the increase of entropy principle for...Ch. 15.7 - Prob. 85PCh. 15.7 - What does the Gibbs function of formation gf of a...Ch. 15.7 - Liquid octane (C8H18) enters a steady-flow...Ch. 15.7 - Prob. 88PCh. 15.7 - Reconsider Prob. 1588. The automobile engine is to...Ch. 15.7 - Benzene gas (C6H6) at 1 atm and 77F is burned...Ch. 15.7 - Prob. 91PCh. 15.7 - n-Octane [C8H18(l)] is burned in the...Ch. 15.7 - A steady-flow combustion chamber is supplied with...Ch. 15.7 - Prob. 94RPCh. 15.7 - Prob. 95RPCh. 15.7 - Prob. 96RPCh. 15.7 - Prob. 97RPCh. 15.7 - Prob. 98RPCh. 15.7 - Prob. 99RPCh. 15.7 - n-Butane (C4H10) is burned with the stoichiometric...Ch. 15.7 - A gaseous fuel mixture of 60 percent propane...Ch. 15.7 - Calculate the higher and lower heating values of...Ch. 15.7 - Prob. 103RPCh. 15.7 - Methane gas (CH4) at 25C is burned steadily with...Ch. 15.7 - A 6-m3 rigid tank initially contains a mixture of...Ch. 15.7 - Propane gas (C3H8) enters a steady-flow combustion...Ch. 15.7 - Determine the highest possible temperature that...Ch. 15.7 - Liquid propane [C3H8(l)] enters a combustion...Ch. 15.7 - Prob. 109RPCh. 15.7 - Prob. 110RPCh. 15.7 - Prob. 111RPCh. 15.7 - A steam boiler heats liquid water at 200C to...Ch. 15.7 - Repeat Prob. 15112 using a coal from Utah that has...Ch. 15.7 - Liquid octane (C8H18) enters a steady-flow...Ch. 15.7 - Prob. 115RPCh. 15.7 - Consider the combustion of a mixture of an...Ch. 15.7 - Prob. 117RPCh. 15.7 - A fuel is burned steadily in a combustion chamber....Ch. 15.7 - A fuel is burned with 70 percent theoretical air....Ch. 15.7 - Prob. 126FEPCh. 15.7 - One kmol of methane (CH4) is burned with an...Ch. 15.7 - The higher heating value of a hydrocarbon fuel...Ch. 15.7 - Acetylene gas (C2H2) is burned completely during a...Ch. 15.7 - An equimolar mixture of carbon dioxide and water...Ch. 15.7 - A fuel is burned during a steady-flow combustion...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Extent of Reaction; Author: LearnChemE;https://www.youtube.com/watch?v=__stMf3OLP4;License: Standard Youtube License