You wish to measure the iron content of the well water on the new property you are about to buy. You prepare a reference standard Fe" solution with a concentration of 8.99 x 10 M. You treat 15.0 ml. of this reference with HNO, and excess KSCN to form a red complex and dilute the reference to 40.0 ml. The diluted reference is placed in a cell with a 1.00-cm light path. You then take 25.0 ml. of the well water, treat with HNO, and excess KSCN, and dilute to 100.0 ml. This diluted sample is placed in a variable pathlength cel. The absorbance of the reference and the sample solutions match when the pathlength is 165 cm. What is the concentration of iron in the well water? For each solution, the zero is set with a blank.

You wish to measure the iron content of the well water on the new property you are about to buy. You prepare a reference standard Fe" solution with a concentration of 8.99 x 10 M. You treat 15.0 ml. of this reference with HNO, and excess KSCN to form a red complex and dilute the reference to 40.0 ml. The diluted reference is placed in a cell with a 1.00-cm light path. You then take 25.0 ml. of the well water, treat with HNO, and excess KSCN, and dilute to 100.0 ml. This diluted sample is placed in a variable pathlength cel. The absorbance of the reference and the sample solutions match when the pathlength is 165 cm. What is the concentration of iron in the well water? For each solution, the zero is set with a blank.

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

A 100.0-mL sample of spring water was treated to convert any iron present to Fe2+.Titration with 35.00-mLof 0.002345 M K2Cr2O7 resulted in the reaction6Fe2+ + Cr2O72- + 14H+  6Fe3+ 1 2Cr3+ + 7H2OThe excess K2Cr2O7 was back-titrated with 8.32 mL of 0.00897 M Fe2+ solution.Calculate the concentration of iron in the sample in parts per million.
Electrochemistry!
A 0.6006-g sample of Ni/Cu condenser tubing was dissolved in acid and diluted to 100 mL in a volumetric flask. Titration of both ions in a 25.0ml aliquot of this solution required 45.81 mL of 0.052285M EDTA. Mercaptoacetic acid and NH3 were then introduced; production of the Cu complex with the former resulted in the release of an equivalent amount of EDTA, which required 22.85ml titration with 0.07238M Mg2+. Calculate the %Ni (59.693 g/mol) in the alloy.
You wish to measure the iron content of the well water on the new property you are about to buy. You prepare a reference standard Fe3+ solution with a concentration of 7.22 × 10-4 M. You treat 11.0 mL of this reference with HNO, and excess KSCN to form a red complex and dilute the reference to 60.0 mL. The diluted reference is placed in a cell with a 1.00-cm light path. You then take 10.0 mL of the well water, treat with HNO, and excess KSCN, and dilute to 100.0 mL. This diluted sample is placed in a variable pathlength cell. The absorbance of the reference and the sample solutions match when the pathlength is 3.93 cm. What is the concentration of iron in the well water? For each solution, the zero is set with a blank. [Fe3+]well М Jwell water
2. One of the common methods used to determine phosphorus in urine isto treat urine with molybdenum(VI) resulting in a complex compoundof 12- molybdophosphate and then reduced using ascorbic acid produces a blue-colored compound called molybdenum blue (max = 650 nm). A patient's urine sample collected over 24 hours produced 1122 mL of urine. A total of 1 mL of the sample was treated with Mo(VI) and ascorbic acid and diluted until it reached a volume of 50 mL. A calibration curve is also prepared by treating 1 mL of standard phosphate solution in the same way. The absorbance of the standard solution and the sample was then measured at a wavelength of 650 nm and produced the following data: Solution Absorbance at λ 650 nm Phosphate 1 ppm Phosphate 2 ppm Phosphate 3 ppm Phosphate 4 ppm Urine sample 0,230 0.436 0,638 0,848 0.518 a. Create a calibration curve for the data and determine the slope, intercept, and R values of 2! Determine the concentration of phosphates found in urine samples…
The potassium ion in 250 ml of a water sample was first precipitated as potassium tetraphenylborate: K +(aq) + (C6H5)B- (aq)- KB(C6H5)4 (s). washed, dried and dissolved in an organic solvent. treatment of the organic solution with an excess of aqueous solution of the Hg(ii)-edta complex generated the following reaction: 4HgY2- (aq) +KB(C6H5)4(s) + 4H2O ➜H3BO3, (aq) +4C6H5Hg+(aq) + 4HY3- (aq) + K+ (aq) + OH -(aq) The released edta (in the form of HY3-) was fully titrated with 28.73 ml of 0.04xy mol/l zncl2 solution. Determine the concentration in mg/l of potassium in the water sample. xy is 11
9.00 mL of 6.00 x 103 M Fe(NO3)3 (6.00 times 10 to the minus 3rd power M Fe (NO3)3) is added to 5.00 mL of 6.00 x 10-3 M KSCN (6.00 times 10 to the minus 3rd power M KSCN) along with 4.00 mL of water. The concentration of [F e(SCN)2*] was found to be 1.00 x 10-4 M (1.00 times 10 to the minus 4th power M) at equilibrium. How many moles of SCN" (SCN minus) are present in the solution at equilibrium? Express your answer as a decimal number (no exponents). Your Answer: Answer units
25.00 mL 0.01000 M Ni2+ is titrated with 0.01000 M EDTA in a solution buffered to pH 5.0. Given that the formation constant for the Ni-EDTA (NiY2–) chelate is 4.2 x 1018 and the 4 value at pH 5.0 is 3.54 x 10–7 Calculate the approximate transition range of this indicator when used in the titration of Ni2+ with EDTA at pH 5.0.
25.00 mL 0.01000 M Ni2+ is titrated with 0.01000 M EDTA in a solution buffered to pH 5.0. Given that the formation constant for the Ni-EDTA (NiY2–) chelate is 4.2 x 1018 and the 4 value at pH 5.0 is 3.54 x 10–7 An indicator (Ind) forms a metal-indicator complex with Ni2+ (NiInd), giving aconditional formation constant of 1.00 x 108 at pH 5.0. It is generally assumedthat human eyes can detect about 1 part of one color in 10 parts of another;therefore, the first discernible color change will occur when the [NiInd]:[Ind]ratio changes from 10 to about 0.1.
What effect would it have on calculated value of Ksp if insufficient time was allowed for the Ca(IO3)2 solution to reach equilibrium?
25.00 mL 0.01000 M Ni2+ is titrated with 0.01000 M EDTA in a solution buffered topH 5.0. Given that the formation constant for the Ni-EDTA (NiY2–) chelate is4.2 x 1018 and the 4 value at pH 5.0 is 3.54 x 10–7. Explain briefly why EDTA is an important reagent used in complexometrictitrations.
2. One of the common methods used to determine phosphorus in urine isto treat urine with molybdenum(VI) resulting in a complex compoundof 12- molybdophosphate and then reduced using ascorbic acid produces a blue-colored compound called molybdenum blue (max = 650 nm). A patient's urine sample collected over 24 hours produced 1122 mL of urine. A total of 1 mL of the sample was treated with Mo(VI) and ascorbic acid and diluted until it reached a volume of 50 mL. A calibration curve is also prepared by treating 1 mL of standard phosphate solution in the same way. The absorbance of the standard solution and the sample was then measured at a wavelength of 650 nm and produced the following data: Solution Absorbance at λ 650 nm Phosphate 1 ppm Phosphate 2 ppm Phosphate 3 ppm Phosphate 4 ppm Urine sample 0,230 0.436 0,638 0,848 0.518 a. Create a calibration curve for the data and determine the slope, intercept, and R values of 2! Determine the concentration of phosphates found in urine samples…