5.10 An 18-ft- (5.4-m-) span simply supported beam carries a uniform dead load of 4 K/ft (60 kN/m) and a live load of 1.5 K/ft (22 kN/m). The beam has a width b= 12 in. (300 mm) and a depth d=24 in. (600 mm) and is reinforced with six no. 9 bars (6×28 mm) in two rows. Check the beam for shear and design the necessary shear reinforcement. Given: f =3 ksi (21 MPa) and fyt =60 ksi (280 MPa).

5.10 An 18-ft- (5.4-m-) span simply supported beam carries a uniform dead load of 4 K/ft (60 kN/m) and a live load of 1.5 K/ft (22 kN/m). The beam has a width b= 12 in. (300 mm) and a depth d=24 in. (600 mm) and is reinforced with six no. 9 bars (6×28 mm) in two rows. Check the beam for shear and design the necessary shear reinforcement. Given: f =3 ksi (21 MPa) and fyt =60 ksi (280 MPa).

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A three-span continuous beam has an internal hinge at B. Section B is at the mid-span of AC. Section E is at the mid-span of CG. The 20 kN 20 kN 10 kN 10 kN 5 kN/m E H B D F AG to 4 m 4 m 4 m load is applied at section B whereas 10 kN loads In the figure, CD = DE = EF = FG=1m are applied at sections D and F as shown in the figure. Span GH is subjected to uniformly distributed load of magnitude 5 kN/m. For the loading shown, shear force immediate to the right of section E is 9.84 kN upwards and the sagging moment at section E is 10.31 kN-m. 1 2 The magnitude of the shear force The vertical reaction at support H is immediate to the left and immediate to the right of section B are.
A beam is simply supported and has a span of 12 m. The beam is a W33×240 with Ey=345 MPa. Compute the following: A. If the compression flange is fully braced laterally. Express your answer in kN/m. (ASD) B. If the compression flange is fully braced laterally. Express your answer in kN/m. (LRFD) Properties of W33×240: Weight = 3.51 kN/m tw = 21.08 mm x = 352.54 mm A = 45,548 mm? Ix = 5,660.75 × 10® mm ry = 92.34 mm d = 850.9 mm ly = 388.34 x 10® mm* Je = 14.51 x 10° mm bị = 402.97 mm Sx = 13,322.68 x 10° mm3 ris = 105.92 mm %3D t = 35.56 mm Sy = 1,933.67 x 10° mm3
Design a simply supported rectangular reinforced concrete beam for the span and service loads shown. Use fc' = 3000 psi and fy = 60,000 psi. 8 kips DL 10 kips LL 0.5 kip/ft LL and 0.3 kip/ft DL (excludes beam weight) -9'-0"- -11'-0"- Assume that the beam is to be extended to overhang the right support by 10 ft. The uniform load also extends to the end of the overhang.
1.8-3 A horizontal beam AB with cross-sectional dimensions (b = 0.75 in.) × (h = 8.0 in.) is supported by an inclined strut CD and carries a load P = 2700 lb at joint B [see figure part (a)]. The strut, which consists of two bars each of thick- ness 5b/8, is connected to the beam by a bolt passing through the three bars meeting at joint C [see figure part (b)]. s ale
A three-span continuous beam has an internal hinge at B. Section B is at the mid-span of AC. Section E is at the mid-span of CG. The 20 kN load is applied at section B whereas 10 kN loads are applied at sections D and F as shown in the 20 kN 10 kN 10 kN 5 kN/m C H B A D FAG 4 m 4 m 4 m In the figure, CD = DE = EF= FG=1m figure. Span GH is subjected to uniformly distributed load of magnitude 5 kN/m. For the loading shown, shear force immediate to the right of section E is 9.84 kN upwards and the sagging moment at section E is 10.31 kN-m. The magnitude of the shear force left and immediate to immediate to the right of section B are