A three-span continuous beam has an internal hinge at B. Section B is at the mid-span of AC. Section E is at the mid-span of CG. The 20 kN load is applied at section B whereas 10 kN loads are applied at sections D and F as shown in the figure. Span GH is subjected to uniformly distributed load of magnitude 5 kN/m. For the 20 kN 10 kN 10 kN 5 kN/m C B F 4m 4 m 4m In the figure, CD= DE = EF = FG= 1m loading shown, shear force immediate to the right of section E is 9.84 kN upwards and the sagging moment at section E is 10.31 kN-m. 1 2. The magnitude of the shear force The vertical reaction at support H is immediate to the left and immediate to the right of section B are

A three-span continuous beam has an internal hinge at B. Section B is at the mid-span of AC. Section E is at the mid-span of CG. The 20 kN load is applied at section B whereas 10 kN loads are applied at sections D and F as shown in the figure. Span GH is subjected to uniformly distributed load of magnitude 5 kN/m. For the 20 kN 10 kN 10 kN 5 kN/m C B F 4m 4 m 4m In the figure, CD= DE = EF = FG= 1m loading shown, shear force immediate to the right of section E is 9.84 kN upwards and the sagging moment at section E is 10.31 kN-m. 1 2. The magnitude of the shear force The vertical reaction at support H is immediate to the left and immediate to the right of section B are

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

An Am. long beam is on hinged at its left end and on fixed support at its right end. Its flexural capacity is 610 kN.m. whilte its web shear capacity is 642 kN. Beam flexural rigidity is Y x 1012 N.mm². #1 What is the allowable uniformly distributed load on the beam so that the flexural capacity is not exceeded? #2 Based on web shear capacity, what is the allowable uniformly distributed load (kN/m)? #3 When the support at the left end is removed, a cantilever beam results. How much should the beam be cambered at the free end to offset the end deflection if the load W = 210 kN/m? Use: A = 8 Y=29
namber 22
Determine the absolute shear and moment of the beam and series of concentrate loads shown
1. Determine the ultimate moment capacity of the T-beam shown below. The beam is reinforced with 6-032mm placed in two rows. Use fc=25MPA, fy=414MP.. 820 mm Il- 100 mm d= 610 mm 8 - 32 mn 250 mm 2. Determinethe safe concentrated live load at midspan that the doubly-reinforced beam section shown can carry if it has a simple span of 5m. Use f'c=21MPA, fy=276MPA, unit wt of concrete = 23.54KN/m³. 360 mm 2-0 25 mm Fď = 80 d= 680 mm 780 mm 8-0 36 mm 100 3. If in Prob. 2 the bottom bars are reduced to 6-032mm (3 in each row). Compute the safe concentrated live load at 1/3 span and 2/3 span the beam can carry.
STEEL DESIGN Situation 1: Situation 3: A light crane rail sits on and is securely fastened to a W crane girder. The girder is simply supported on a span of 6 m. The crane wheel loads are as follows: V = 80 kN and H = 8 kN. Assume full transfer of lateral load to the top flange of the girder. An 8-m long steel column is pinned at the top and fixed at the bottom. The column is provided with lateral support at mid-height in the weak direction. Properties: Ix = 178.1 x 10 mm4 Girder properties: ly = 18.8 x 106 mm4 A = 8129 mm²2 Weight = 67 kg/m Sx = 1, 280 x 10³ mm3 Sy = 361 x 103 mm3 7. Determine the critical slenderness ratio. a. 38 c. 27 Allowable stresses: b. 83 d. 41 Fbx = 164 MPa Find the critical buckling load. 9270 kN Fby = 186 MPa 8. 2190 kN 2310 kN a. с. Determine the actual bending stress about the x- axis. 1. b. 4730 kN d. Compute the minimum length of the column for which the Euler's formula is valid if the proportional limit of the steel used is 320 MPa. a. 99.12 MPa С. 93.75…
Determine the bar forces of member BG. For the given loads: X= 26 kN, Y= 78 kN, Z= 104 kN, B= 26 Y G H. A m B C D E Y 4 @ 3B m = 12B m 6B m
AW460×60 steel beam is loaded as shown. Assume w - 50 kN/m, Mo - 95 kN-m, Las - 3.8 m, Lec - 1.6 m, E- 200 GPa, and I- 255 x 10° mm. (a) Determine the reaction force at roller B. Forces are positive upwards. (b) Determine the maximum positive bending moment in the span. (c) If the allowable bending stress is 210 MPa, determine the minimum acceptable section modulus for the steel beam. Mo LAB LBC Answer: (a) Ву - kN (b) Mpos kN-m (c) Smin x 10° m3
A simple supported floor joist with a section shown has a span length of 4.3m. The total dead load carried by the joist is 35KN/m. The material properties are fc'=28MPa and fy=345MPa. As-4-20mm dia. Bars. Determine the maximum live load (Kn/m) that the joist can carry.
Properties 1. compute the web shear capacity a. compute the horizontal shear copacity (kN) a the JIS00 mm2 arca depth width oF Flange thickness Df Flange 350 mm Dettral axis 2I0 mm 16 mm 3. 1F the Girder was used as an 8meter long simple span capries equal concentrated dead load,P at evay quarter points and determine the load P based on shear copacity. 10 mm web thickness uniform load of 12. a KN/m, a wwgo1x クりの 45Xr0 mm? Fy 248 M Pa 4. calcubte the maximum shear it used as a 'F Fb 148 MPa 8m beam simply supportcd at the lept end and 2meter prom the right end which carries a total unitorm FV 99 MPa cocad of 45 kN/m.
PROBLEM 1: The beam shown is made up of W 24 x 55 structural steel. It carries an unfactored uniform service dead load of 12.52 KN/m excluding its own weight and an unfactored uniform service live load of 4.15 KN/m. It also carries an unfactored concentrated service dead load of 6.67 KN and an unfactored concentrated live load of 7.84 KN both at its free end. The cantilever beam has a length of 1.56 m. Use A-36 steel and LRFD. 2) What is the unfactored weight of the beam itself in KN/m ? 3) What is the total factored uniformly distributed dead load of the beam in KN/m. ? 4) What is the total factored uniformly distributed load of the beam in KN/m. ? 5) What is the total factored concentrated load of the beam at the free end in KN? 6) What is the actual maximum external shear of the beam in KN? 7) What is the actual maximum external bending moment of the beam in KN-m.? What is the moment capacity of the beam in KN-m.? 9) What is area of the flanges in mm2 ? 10) What is area of the web…
Pls show complete solution and fbd
i need solutions in 10 minutes please