A. A simply supported girder spans 12 m. It carries two (2) beams, each at 4.5 m. from the supports. Theconcentrated load from each beam is 75 KN. Don't neglect the weight of beam W410x100PropertiesBeamSection W410 mm x 100 kg/mIx-397 x 106 mm, ly=49 x 106 mmª,tf = 21 mm, tw=15mm, Modulus of elasticity E = 200 GPa,Consider bending about the x-axis.A=12710 mm², d=415 mm, bf=265 mm,a. Which of the following gives the maximum bending stress?Fy=248 MPa

Given data Bending about x-axis Beam: W410 mm × 100 kg/m Find the maximum bending stress.

A. A simply supported girder spans 12 m. It carries two (2) beams, each at 4.5 m. from the supports. The concentrated load from each beam is 75 KN. Don't neglect the weight pf beam W410x100 Beam Properties Section W410 mm x 100 kg/m A=12710 mm², d-415 mm, bf=265 mm, Ix=397 x 106 mm, ly=49 x 106 mmª, tf = 21 mm, tw=15mm, Modulus of elasticity E = 200 GPa, Consider bending about the x-axis. a. Which of the following gives the maximum bending stress? Fy=248 MPa

A. A simply supported girder spans 12 m. It carries two (2) beams, each at 4.5 m. from the supports. The concentrated load from each beam is 75 KN. Don't neglect the weight pf beam W410x100 Beam Properties Section W410 mm x 100 kg/m A=12710 mm², d-415 mm, bf=265 mm, Ix=397 x 106 mm, ly=49 x 106 mmª, tf = 21 mm, tw=15mm, Modulus of elasticity E = 200 GPa, Consider bending about the x-axis. a. Which of the following gives the maximum bending stress? Fy=248 MPa

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

3) The simply supported beam with the cross-section as shown supports a total uniformly distributed load of 4P and 2P and concentrated load P as shown in the figure. Determine the maximum allowable value of P if the allowable flexural stresses are limited to 35 MPa in tension and 150 MPa in compression respectively. 1m P B 1m IC 4P 3m D 2P 1m DE U 175 200 (Dimensions in mm)
A steel column carries an axial load of 801 kN and a moment of 71 kN-m at the top and moment at the bottom which is only70% of the moment at thetop. The two moments are in opposite direction and applied about the x-axis and the steel section has the following properties:A = 13159 mm2ry = 109 mmry = 94 mmSx = 1200 x 103 mm3K= 1.0L= 3.6 mE= 200,000 MpaFy = 248 MpaUse NSCP specification for compressive stress and Fb =148 Mpa.Determine the Allowable Compressive Stress.
What is the internal force acting on member DF, EF and EG? Please dictate if its in compression or in tension. Complete solutions please.
PLEASE INCLUDE COMPLETE FIGURES
A cantilever beam having a 4m span carries a uniformly distributed load throughout its length. The beam is A36 steel with yield strength Fy = 248 MPa. The beam is not restrained against lateral buckling. The beam is W 21 by 62 steel shape, whose relevant properties are shown below: r = 0.053 m d = 0.533 m bf = 0.210 m tf = 0.016 m S = 0.002077 m3 Given this condition, solve for the allowable flexural stress in the compression flange. Use Cb = 1 as should be taken conservatively
(3) 24 B Bean AB A Beam AB. 301 G 4#8 12" 24' -#4 24" Given fé= 3 ksi Grade 60 steel NWC. COVER = 1.5" #4 stirrups. DL= 70 psf, not including self-weight. LL = 40 psf. (No Live Load 4 # 8. b=12", h=24", Reduction
An 8 m long steel is simply supported at the left end and 2 m from the right end. It carries a total uniform load of 45 kN/m all throughout its length. STEEL DECIGON CIVIL ENGINEERING Beam properties: A= 11,500 mm² bf = 250 mm tw- 10 mm d === 350 mm If=: 16 mm 1x = 266 x 106 mm c) To strengthen the beam, 2- 200 mm x 10 mm cover plates, one at the top of the flange and the other at the bottom of the flange were added. What is the resulting maximum bending stress?
/. u/ es ug up w21E A W21 x 50 spans 11.0 m on a simple span. The compression flange is laterally supported at the third points. A36 Steel is used. A = 9,484 mm² b₁ = 165.9 mm Properties of W21 x 50 section tw = 9.7 mm Ix=409.57 x 10 mm Iy = 10.36 x 10 mm Sx = 1548.58 x 10³ mm³ Sy = 125.20 x 10³ mm³ d=529.1 mm tf = 13.6 mm w = 0.73 kN/m a) Determine the allowable bending stress of this beam. b) Determine the allowable superimposed uniformly distributed load be place on this beam.
STATICS OF RIGID BODIES. PLEASE ANSWER ASAP THANK YOU FOR A RATE
From A to B it is 7.5ft, from A to G it is 24ft.
A steel column carries an axial load of 785 kN and a moment of 72 kN-m at the top and moment at the bottom which is only70% of the moment at the top. The two moments are in opposite direction and applied about the x-axis and the steel section has the following properties: A = 12818 mm2rx =109 mmry= 94 mmSx = 1200 x 103 mm3K= 1.0L= 3.6 mE = 200,000 MpaFy = 248 MpaUse NSCP specification for compressive stress and Fb =148 Mpa. Questions:From the Interaction Formula, compute the interaction value. Assume that the column is braced against joint translation (sidesway).