
Concept explainers
A microscope has a 14.0x eyepiece and a 60.0x objective lens 20.0 cm apart. Calculate (a) the total magnification, (b) the focal length of each lens, and (c) where the object must be for a normal relaxed eye to see it in focus.

Part (a)To determine:
The total magnification of the given microscope.
Answer to Problem 43P
Solution:
The magnification of the given microscope is found to be 840 x.
Explanation of Solution
Microscopes are devices used to magnify tiny objects. The construction of the microscope is similar to that of the telescope. The objective produces a real and inverted image of the object, which falls between the focus and the optic centre of the eyepiece. The eyepiece produces an enlarged virtual image of the image formed by the objective. The final image formed is inverted and enlarged.
The total magnification of the microscope is the product of the magnification of the objective and the eyepiece lenses.
Given:
The magnification of the eyepiece
The magnification of the objective
Barrel length of the microscope
Formula used:
Calculation:
Use the given values of the magnification in the formula and simplify.

Part (b)To determine:
The focal length of the objective and the eyepiece lenses.
Answer to Problem 43P
Solution:
The focal length of the objective lens was found to be 0.299 cm and the focal length of the eyepiece was found to be 1.79 cm.
Explanation of Solution
Using the magnification of the eyepiece, the focal length of the eyepiece can be determined. From the calculated value of the focal length of the eyepiece, the object distance can be determined. Finally, the use of thin lens equation, gives the value of the focal length of the objective.
Given:
The magnification of the eyepiece
The magnification of the objective
Barrel length of the microscope
Formula used:
For a relaxed eye, the image is formed at infinity. If the values of and are very less compared to the value of l, then,
The magnification of the objective is given by
Where, the object distance is and the image distance is
The thin lens equation is written as,
Calculation:
Use the given values of N and , calculate the value of the focal length of the eyepiece
The object distance is calculated using the expression,
Use the thin lens equation to calculate the focal length of the objective.
On solving the equation, the focal length of the objective is found to be .

Part (c)To determine:
The distance at which the object must be placed to see it in focus.
Answer to Problem 43P
Solution:
The object must be placed at 0.304 cm from the objective, to see it in focus.
Explanation of Solution
From the calculated value of the focal length of the eyepiece, the object distance can be determined.
Given:
The magnification of the eyepiece
The magnification of the objective
Barrel length of the microscope
Formula used:
The magnification of the objective is given by
Where, the object distance is and the image distance is .
Calculation:
The object distance is calculated using the expression,
Chapter 25 Solutions
Physics: Principles with Applications
Additional Science Textbook Solutions
Microbiology with Diseases by Body System (5th Edition)
Anatomy & Physiology (6th Edition)
Chemistry: An Introduction to General, Organic, and Biological Chemistry (13th Edition)
Genetic Analysis: An Integrated Approach (3rd Edition)
Introductory Chemistry (6th Edition)
Organic Chemistry (8th Edition)
- You are standing a distance x = 1.75 m away from this mirror. The object you are looking at is y = 0.29 m from the mirror. The angle of incidence is θ = 30°. What is the exact distance from you to the image?arrow_forwardFor each of the actions depicted below, a magnet and/or metal loop moves with velocity v→ (v→ is constant and has the same magnitude in all parts). Determine whether a current is induced in the metal loop. If so, indicate the direction of the current in the loop, either clockwise or counterclockwise when seen from the right of the loop. The axis of the magnet is lined up with the center of the loop. For the action depicted in (Figure 5), indicate the direction of the induced current in the loop (clockwise, counterclockwise or zero, when seen from the right of the loop). I know that the current is clockwise, I just dont understand why. Please fully explain why it's clockwise, Thank youarrow_forwardA planar double pendulum consists of two point masses \[m_1 = 1.00~\mathrm{kg}, \qquad m_2 = 1.00~\mathrm{kg}\]connected by massless, rigid rods of lengths \[L_1 = 1.00~\mathrm{m}, \qquad L_2 = 1.20~\mathrm{m}.\]The upper rod is hinged to a fixed pivot; gravity acts vertically downward with\[g = 9.81~\mathrm{m\,s^{-2}}.\]Define the generalized coordinates \(\theta_1,\theta_2\) as the angles each rod makes with thedownward vertical (positive anticlockwise, measured in radians unless stated otherwise).At \(t=0\) the system is released from rest with \[\theta_1(0)=120^{\circ}, \qquad\theta_2(0)=-10^{\circ}, \qquad\dot{\theta}_1(0)=\dot{\theta}_2(0)=0 .\]Using the exact nonlinear equations of motion (no small-angle or planar-pendulumapproximations) and assuming the rods never stretch or slip, determine the angle\(\theta_2\) at the instant\[t = 10.0~\mathrm{s}.\]Give the result in degrees, in the interval \((-180^{\circ},180^{\circ}]\).arrow_forward
- What are the expected readings of the ammeter and voltmeter for the circuit in the figure below? (R = 5.60 Ω, ΔV = 6.30 V) ammeter I =arrow_forwardsimple diagram to illustrate the setup for each law- coulombs law and biot savart lawarrow_forwardA circular coil with 100 turns and a radius of 0.05 m is placed in a magnetic field that changes at auniform rate from 0.2 T to 0.8 T in 0.1 seconds. The plane of the coil is perpendicular to the field.• Calculate the induced electric field in the coil.• Calculate the current density in the coil given its conductivity σ.arrow_forward
- An L-C circuit has an inductance of 0.410 H and a capacitance of 0.250 nF . During the current oscillations, the maximum current in the inductor is 1.80 A . What is the maximum energy Emax stored in the capacitor at any time during the current oscillations? How many times per second does the capacitor contain the amount of energy found in part A? Please show all steps.arrow_forwardA long, straight wire carries a current of 10 A along what we’ll define to the be x-axis. A square loopin the x-y plane with side length 0.1 m is placed near the wire such that its closest side is parallel tothe wire and 0.05 m away.• Calculate the magnetic flux through the loop using Ampere’s law.arrow_forwardDescribe the motion of a charged particle entering a uniform magnetic field at an angle to the fieldlines. Include a diagram showing the velocity vector, magnetic field lines, and the path of the particle.arrow_forward
- College PhysicsPhysicsISBN:9781305952300Author:Raymond A. Serway, Chris VuillePublisher:Cengage LearningUniversity Physics (14th Edition)PhysicsISBN:9780133969290Author:Hugh D. Young, Roger A. FreedmanPublisher:PEARSONIntroduction To Quantum MechanicsPhysicsISBN:9781107189638Author:Griffiths, David J., Schroeter, Darrell F.Publisher:Cambridge University Press
- Physics for Scientists and EngineersPhysicsISBN:9781337553278Author:Raymond A. Serway, John W. JewettPublisher:Cengage LearningLecture- Tutorials for Introductory AstronomyPhysicsISBN:9780321820464Author:Edward E. Prather, Tim P. Slater, Jeff P. Adams, Gina BrissendenPublisher:Addison-WesleyCollege Physics: A Strategic Approach (4th Editio...PhysicsISBN:9780134609034Author:Randall D. Knight (Professor Emeritus), Brian Jones, Stuart FieldPublisher:PEARSON





