The target molecule should be drawn for the given statements by using its molecular structure. Concept introduction: The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon . For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment. IUPAC Nomenclature Method Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word. Prefix represents the substituent present in the molecule and its position in the root name. Suffix denotes the presence of functional group if any in the molecule. It can be an alkane , alkene , alkyne, alcohol, aldehyde , carboxylic acid etc... For alkynes molecules, suffix will be ‘ yne ’. For example alkane molecule, suffix will be ‘ ane ’, compound presence of carbonyl group ‘ one ’ and presence of alcohol group suffix will be ‘ ol ’ Root word represents the longest continuous carbon skeleton of the organic molecule. Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer . If the bulky groups are in opposite side then it is trans-isomer . To identify : The systematic structure for the given molecule

Question

Want to see the full answer?

Answer 1

Question

Chapter 20, Problem 45PP

(a)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(b)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(c)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(d)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(e)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(f)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(g)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(h)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(i)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Students have asked these similar questions

On what basis are Na and Nb ranked against each other?

Step 1: add a curved arrow. Select Draw Templates More / " C H Br 0 Br : :o: Erase H H H H Q2Q Step 2: Draw the intermediates and a curved arrow. Select Draw Templates More MacBook Air / " C H Br 0 9 Q Erase 2Q

O Macmillan Learning Question 23 of 26 > Stacked Step 7: Check your work. Does your synthesis strategy give a substitution reaction with the expected regiochemistry and stereochemistry? Draw the expected product of the forward reaction. - - CN DMF MacBook Air Clearly show stereochemistry. Question

Answer 2

Question

Chapter 20, Problem 45PP

(a)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(b)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(c)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(d)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(e)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(f)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(g)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(h)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(i)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 3

Question

Chapter 20, Problem 45PP

(a)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(b)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(c)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(d)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(e)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(f)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(g)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(h)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(i)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 4

Question

Chapter 20, Problem 45PP

(a)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(b)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(c)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(d)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(e)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(f)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(g)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(h)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(i)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Expert Solution & Answer

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 5

Chapter 20, Problem 45PP

(a)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(b)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(c)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(d)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(e)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(f)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(g)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(h)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

(i)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 6

Chapter 20, Problem 45PP

(a)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 7

Chapter 20, Problem 45PP

(a)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 8

(b)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 9

(b)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 10

(c)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 11

(c)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 12

(d)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 13

(d)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 14

(e)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 15

(e)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 16

(f)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 17

(f)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 18

(g)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 19

(g)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 20

(h)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 21

(h)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 22

(i)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 23

(i)

Interpretation Introduction

Interpretation:

The target molecule should be drawn for the given statements by using its molecular structure.

Concept introduction:

The structure the carbon atoms and the hydrogen atoms which are attached to that carbon atom are not to show, rather the bonds in between carbon atoms and to the hetero atoms are drawn as line segments. For acyclic, linear carbon chains it draws as in a zig-zag fashion and for cyclic chains of carbon it draws as a cyclic polygon. For representing a heteroatom attached to the carbon, use a line segment and label the heteroatom at the end of their line segment.

IUPAC Nomenclature Method

Any organic molecule can be named by using certain rules given by IUPAC (International Union for Pure and applied chemistry). IUPAC name consists of three parts in major namely Prefix suffix and root word.

Prefix represents the substituent present in the molecule and its position in the root name.

Suffix denotes the presence of functional group if any in the molecule. It can be an alkane, alkene, alkyne, alcohol, aldehyde, carboxylic acid etc...

For alkynes molecules, suffix will be ‘yne’.

For example alkane molecule, suffix will be ‘ane’, compound presence of carbonyl group ‘one’ and presence of alcohol group suffix will be ‘ol’

Root word represents the longest continuous carbon skeleton of the organic molecule.

Two stereoisomers are there for an saturated alkane molecule. It depends upon the location of bulky group (or high molecular weight) on the triple bonded carbon atoms. If the bulky groups are in same side then it is cis-isomer. If the bulky groups are in opposite side then it is trans-isomer.

To identify: The systematic structure for the given molecule

Answer 24

Expert Solution & Answer

Answer 25

Expert Solution & Answer

Answer 26

Want to see the full answer?

Check out a sample textbook solution

See solution

Answer 27

Ch. 20.2 - Prob. 2ATS Ch. 20.2 - Prob. 4ATS Ch. 20.3 - Prob. 5CC Ch. 20.4 - Prob. 6CC Ch. 20.5 - Prob. 7CC Ch. 20.5 - Prob. 2LTS Ch. 20.5 - Prob. 8PTS Ch. 20.5 - Prob. 9ATS Ch. 20.5 - Prob. 10ATS Ch. 20.5 - Prob. 11CC

Want to see the full answer?

Chapter 20 Solutions