VECTOR MECHANICS FOR ENGINEERS W/CON >B
VECTOR MECHANICS FOR ENGINEERS W/CON >B
12th Edition
ISBN: 9781260804638
Author: BEER
Publisher: MCG
bartleby

Concept explainers

bartleby

Videos

Question
Book Icon
Chapter 18.3, Problem 18.142P

(a)

To determine

The rate of precession ϕ˙0 of the sphere in its initial position.

(a)

Expert Solution
Check Mark

Answer to Problem 18.142P

The rate of precession ϕ˙0 of the sphere in its initial position is 15g11a_.

Explanation of Solution

Given information:

The position of the sphere β is zero.

The largest value of β in the ensuing motion is 30°.

Calculation:

Conservation of angular momentum about the Z and z axes:

The only external forces are acting in homogenous sphere is weight of the sphere and reaction at A. Hence, the angular momentum is conserved about the Z and z axes.

Choose the principal axes Axyz with taking y horizontal and pointing into the paper.

Write the expression for the angular velocity ω.

ω=ϕ˙cosβi+β˙j+(ψ˙ϕ˙sinβ)k

The principal moment of inertia are  Ix=Iy=m(25a2+(2a)2) and Iz=25ma2.

Draw the Free body diagram of homogeneous sphere and the forces acting on it as in Figure (1).

VECTOR MECHANICS FOR ENGINEERS W/CON >B, Chapter 18.3, Problem 18.142P

Write the expression for the angular momentum about point A.

HA=Ixωxi+Iyωyj+Izωzk

Substitute m(25a2+(2a)2) for Ix, ϕ˙cosβ for ωx, m(25a2+(2a)2) for Iy, β˙ for ωy, , 25ma2 for Iz, and (ψ˙ϕ˙sinβ) for ωz.

HA=m(25a2+(2a)2)(ϕ˙cosβ)i+m(25a2+(2a)2)β˙j+25ma2(ψ˙ϕ˙sinβ)k=225ma2ϕ˙cosβi+225ma2β˙j+25ma2(ψ˙ϕ˙sinβ)k

Consider Hz=constant or HAK=constant.

The scalar value of iK=cosβ, jK=0, and kK=sinβ.

Determine the conservation of angular momentum about fixed Z axis HAK.

HAK=constant

Substitute 225ma2ϕ˙cosβi+225ma2βj+25ma2(ψ˙ϕ˙sinβ)k for HA, cosβ for (iK), 0 for (jK), and cosβ for (kK).

{225ma2ϕ˙cosβ(iK)+225ma2β˙(jK)+25ma2(ψ˙ϕ˙sinβ)(kK)}=constant{225ma2ϕ˙cosβ(cosβ)+225ma2β˙(0)+25ma2(ψ˙ϕ˙sinβ)(sinβ)}=constant{225ma2ϕ˙cosβ(cosβ)+25ma2(ψ˙ϕ˙sinβ)(sinβ)}=constant (1)

Substitute ϕ˙0 for ϕ˙, 0 for ψ˙, and 0 for β in Equation (1).

{225ma2ϕ˙0cos0(cos0)+25ma2(0ϕ˙0sin0)(sin0)}=constantconstant=225ma2ϕ˙0

Substitute 225ma2ϕ˙0 for constant in Equation (1).

225ma2ϕ˙cosβ(cosβ)+25ma2(ψ˙ϕ˙sinβ)(sinβ)=225ma2ϕ˙025ma2[11ϕ˙cos2β(ψ˙ϕ˙sinβ)sinβ]=25×11ϕ˙011ϕ˙cos2β(ψ˙ϕ˙sinβ)sinβ=11ϕ˙0 (2)

Determine the constant value using the angular momentum along z–axis.

Hz=constantIzωz=constant

Substitute 25ma2 for Iz and (ψ˙ϕ˙sinβ) for ωz.

25ma2(ψ˙ϕ˙sinβ)=constant (3).

Substitute ϕ˙0 for ϕ˙, 0 for ψ˙, and 0 for β in Equation (3).

25ma2(0ϕ˙0sin(0))=constantconstant=0

Substitute 0 for constant in Equation (3).

25ma2(ψ˙ϕ˙sinβ)=0ψ˙ϕ˙sinβ=0

Substitute 0 for (ψ˙ϕ˙sinβ) in Equation (2).

11ϕ˙cos2β(ψ˙ϕ˙sinβ)sinβ=11ϕ˙011ϕ˙cos2β0(sinβ)=11ϕ˙0ϕ˙=11ϕ˙011cos2βϕ˙=ϕ˙0sec2β

Conservation of energy:

Determine the value of kinetic energy T.

T=12(Ixωx2+Iyωy2+Izωz2)

Substitute m(25a2+(2a)2) for Ix, ϕ˙cosβ for ωx, m(25a2+(2a)2) for Iy, β˙ for ωy, , 25ma2 for Iz, and (ψ˙ϕ˙sinβ) for ωz.

T={12(m(25a2+(2a)2)(ϕ˙cosβ)2+m(25a2+(2a)2)(β˙)2+25ma2(ψ˙ϕ˙sinβ)2)}=12(225ma2ϕ˙2cos2β+225ma2(β˙)2+25ma2(ψ˙ϕ˙sinβ)2)

Select the datum at β=0.

Determine the value of conservation of energy using the relation.

T+V=constant

Here, E is the constant and V is the potential energy.

Substitute 12(225ma2ϕ˙2cos2β+225ma2(β)2+25ma2(ψ˙ϕ˙sinβ)2) for T and 2mgasinβ for V.

{12(225ma2ϕ˙2cos2β+225ma2(β˙)2+25ma2(ψ˙ϕ˙sinβ)2)2mgasinβ}=constant (4)

Substitute ϕ˙0 for ϕ˙, 0 for β, 0 for β˙, and 0 for ψ˙ in Equation (4).

{12(225ma2ϕ˙02cos20+225ma2(0)2+25ma2(0ϕ˙0sin0)2)2mgasin0}=constantconstant=115ma2ϕ˙02

Substitute 115ma2ϕ˙02 for constant in Equation (4).

{12(225ma2ϕ˙2cos2β+225ma2(β˙)2+25ma2(ψ˙ϕ˙sinβ)2)2mgasinβ}=115ma2ϕ˙0212×25ma2((11ϕ˙2cos2β+11(β˙)2+(ψ˙ϕ˙sinβ)2)10gasinβ)=115ma2ϕ˙02((11ϕ˙2cos2β+11(β˙)2+(ψ˙ϕ˙sinβ)2)10gasinβ)=11ϕ˙02 (5)

Consider β˙=0 for the maximum value of β.

Substitute ϕ˙0sec2β for ϕ˙, 0 for (ψ˙ϕ˙sinβ), and 0 for β˙ in Equation (5).

11(ϕ˙0sec2β)2cos2β+11(0)210gasinβ=11ϕ˙0211ϕ˙02sec4β×1sec2β10gasinβ=11ϕ˙0211ϕ˙02sec2β11ϕ˙02=10gasinβ11ϕ˙02(1cos2βcos2β)=10gasinβ

ϕ˙02(sin2βcos2β)=1011gasinβϕ˙02=1011gasinβ×cos2βsin2βϕ˙02=1011gacos2βsinβ (6)

Substitute 30° for β in Equation (6).

ϕ˙02=1011gacos230°sin30°ϕ˙0=15g11a(43)

Therefore, the rate of precession ϕ˙0 of the sphere in its initial position is 15g11a_.

(b)

To determine

The rates of precession ϕ˙ and the spin ψ˙.

(b)

Expert Solution
Check Mark

Answer to Problem 18.142P

The rate of precession ϕ˙ is 220g33a_.

The rate of spin ψ˙ is 20g33a_.

Explanation of Solution

Given information:

The position of the sphere β is zero.

The largest value of β in the ensuing motion is 30°.

Calculation:

Determine the rate of precession ϕ˙ using the relation.

ϕ˙=ϕ˙0sec2β

Substitute 15g11a for ϕ˙0 and 30° for β.

ϕ˙=15g11asec230°=15g11a×1cos230°=15g11a43=15×16g11×9a=220g33a

Therefore, the rate of precession ϕ˙ is 220g33a_.

Determine the rate of spin ψ˙ using the relation.

ψ˙ϕ˙0sinβ=0

Substitute 220g33a for ϕ˙ and 30° for β.

ψ˙220g33asin30°=0ψ˙=20g33a

The rate of spin ψ˙ is 20g33a_.

Want to see more full solutions like this?

Subscribe now to access step-by-step solutions to millions of textbook problems written by subject matter experts!
Students have asked these similar questions
3. 9. 10. The centrifugal tension in belts (a) increases power transmitted (b) decreases power transmitted (c) have no effect on the power transmitted (d) increases power transmitted upto a certain speed and then decreases When the belt is stationary, it is subjected to some tension, known as initial tension. The value of this tension is equal to the (a) tension in the tight side of the belt (b) tension in the slack side of the belt (c) sum of the tensions in the tight side and slack side of the belt (d) average tension of the tight side and slack side of the belt The relation between the pitch of the chain (p) and pitch circle diameter of the sprocket (d) is given by 60° (a) p=d sin (c) p=d sin (120° T where T Number of teeth on the sprocket. 90° (b) p=d sin T 180° (d) p=d sin T
OBJECTIVE TYPE QUESTIONS 1. The maximum fluctuation of energy is the 2. (a) sum of maximum and minimum energies (b) difference between the maximum and minimum energies (c) ratio of the maximum energy and minimum energy (d) ratio of the mean resisting torque to the work done per cycle In a turning moment diagram, the variations of energy above and below the mean resisting torque line is called (a) fluctuation of energy (b) maximum fluctuation of energy (c) coefficient of fluctuation of energy (d) none of the above Chapter 16: Turning Moment Diagrams and Flywheel 611 The ratio of the maximum fluctuation of speed to the mean speed is called 3. (a) fluctuation of speed (c) coefficient of fluctuation of speed 4. (b) maximum fluctuation of speed (a) none of these The ratio of the maximum fluctuation of energy to the.......... is called coefficient of fluctuation of energy. (a) minimum fluctuation of energy (b) work done per cycle The maximum fluctuation of energy in a flywheel is equal to 5.…
OBJECTIVE TYPE QUESTIONS 1. The velocity ratio of two pulleys connected by an open belt or crossed belt is 2. (a) directly proportional to their diameters (b) inversely proportional to their diameters (c) directly proportional to the square of their diameters (d) inversely proportional to the square of their diameters Two pulleys of diameters d, and d, and at distance x apart are connected by means of an open belt drive. The length of the belt is (a)(d+d₁)+2x+ (d₁+d₂)² 4x (b)(d₁-d₂)+2x+ (d₁-d₂)² 4x (c)(d₁+d₂)+ +2x+ (d₁-d₂)² 4x (d)(d-d₂)+2x+ (d₁ +d₂)² 4x 3. In a cone pulley, if the sum of radii of the pulleys on the driving and driven shafts is constant, then (a) open belt drive is recommended (b) cross belt drive is recommended (c) both open belt drive and cross belt drive are recommended (d) the drive is recommended depending upon the torque transmitted Due to slip of the belt, the velocity ratio of the belt drive 4. (a) decreases 5. (b) increases (c) does not change When two pulleys…

Chapter 18 Solutions

VECTOR MECHANICS FOR ENGINEERS W/CON >B

Ch. 18.1 - Prob. 18.12PCh. 18.1 - Prob. 18.13PCh. 18.1 - Two L-shaped arms each have a mass of 5 kg and are...Ch. 18.1 - For the assembly of Prob. 18.15, determine (a) the...Ch. 18.1 - Prob. 18.17PCh. 18.1 - Determine the angular momentum of the shaft of...Ch. 18.1 - Prob. 18.20PCh. 18.1 - Prob. 18.21PCh. 18.1 - Prob. 18.22PCh. 18.1 - Prob. 18.23PCh. 18.1 - Prob. 18.24PCh. 18.1 - Prob. 18.25PCh. 18.1 - Prob. 18.26PCh. 18.1 - Prob. 18.27PCh. 18.1 - Prob. 18.28PCh. 18.1 - A circular plate of mass m is falling with a...Ch. 18.1 - Prob. 18.30PCh. 18.1 - Prob. 18.31PCh. 18.1 - Determine the impulse exerted on the plate of...Ch. 18.1 - The coordinate axes shown represent the principal...Ch. 18.1 - Prob. 18.34PCh. 18.1 - Prob. 18.37PCh. 18.1 - Prob. 18.38PCh. 18.1 - Prob. 18.39PCh. 18.1 - Prob. 18.40PCh. 18.1 - Prob. 18.41PCh. 18.1 - Prob. 18.42PCh. 18.1 - Determine the kinetic energy of the disk of Prob....Ch. 18.1 - Determine the kinetic energy of the solid...Ch. 18.1 - Prob. 18.45PCh. 18.1 - Determine the kinetic energy of the disk of Prob....Ch. 18.1 - Determine the kinetic energy of the assembly of...Ch. 18.1 - Determine the kinetic energy of the shaft of Prob....Ch. 18.1 - Prob. 18.49PCh. 18.1 - Prob. 18.50PCh. 18.1 - Determine the kinetic energy lost when edge C of...Ch. 18.1 - Prob. 18.52PCh. 18.1 - Prob. 18.53PCh. 18.1 - Determine the kinetic energy of the space probe of...Ch. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.56PCh. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.58PCh. 18.2 - Prob. 18.59PCh. 18.2 - Determine the rate of change HG of the angular...Ch. 18.2 - Prob. 18.61PCh. 18.2 - Determine the rate of change HD of the angular...Ch. 18.2 - Prob. 18.63PCh. 18.2 - Prob. 18.64PCh. 18.2 - A slender, uniform rod AB of mass m and a vertical...Ch. 18.2 - Prob. 18.66PCh. 18.2 - The assembly shown consists of pieces of sheet...Ch. 18.2 - The 8-kg shaft shown has a uniform cross-section....Ch. 18.2 - Prob. 18.69PCh. 18.2 - Prob. 18.70PCh. 18.2 - Prob. 18.71PCh. 18.2 - Knowing that the plate of Prob. 18.66 is initially...Ch. 18.2 - Prob. 18.73PCh. 18.2 - The shaft of Prob. 18.68 is initially at rest ( =...Ch. 18.2 - The assembly shown weighs 12 lb and consists of 4...Ch. 18.2 - Prob. 18.76PCh. 18.2 - Prob. 18.79PCh. 18.2 - Prob. 18.80PCh. 18.2 - Prob. 18.81PCh. 18.2 - Prob. 18.82PCh. 18.2 - The uniform, thin 5-lb disk spins at a constant...Ch. 18.2 - The essential structure of a certain type of...Ch. 18.2 - A model of a type of crusher is shown. A disk of...Ch. 18.2 - Prob. 18.86PCh. 18.2 - Prob. 18.87PCh. 18.2 - The 2-lb gear A is constrained to roll on the...Ch. 18.2 - Prob. 18.89PCh. 18.2 - Prob. 18.90PCh. 18.2 - 18.90 and 18.91The slender rod AB is attached by a...Ch. 18.2 - The essential structure of a certain type of...Ch. 18.2 - The 10-oz disk shown spins at the rate 1 = 750...Ch. 18.2 - Prob. 18.94PCh. 18.2 - Prob. 18.95PCh. 18.2 - Two disks each have a mass of 5 kg and a radius of...Ch. 18.2 - Prob. 18.97PCh. 18.2 - Prob. 18.98PCh. 18.2 - A thin disk of mass m = 4 kg rotates with an...Ch. 18.2 - Prob. 18.101PCh. 18.2 - Prob. 18.102PCh. 18.2 - A 2.5-kg homogeneous disk of radius 80 mm rotates...Ch. 18.2 - A 2.5-kg homogeneous disk of radius 80 mm rotates...Ch. 18.2 - For the disk of Prob. 18.99, determine (a) the...Ch. 18.3 - A uniform thin disk with a 6-in. diameter is...Ch. 18.3 - A uniform thin disk with a 6-in. diameter is...Ch. 18.3 - Prob. 18.109PCh. 18.3 - The top shown is supported at the fixed point O...Ch. 18.3 - Prob. 18.111PCh. 18.3 - Prob. 18.112PCh. 18.3 - Prob. 18.113PCh. 18.3 - A homogeneous cone with a height of h = 12 in. and...Ch. 18.3 - Prob. 18.115PCh. 18.3 - Prob. 18.116PCh. 18.3 - Prob. 18.117PCh. 18.3 - The propeller of an air boat rotates at 1800 rpm....Ch. 18.3 - Prob. 18.119PCh. 18.3 - Prob. 18.120PCh. 18.3 - Prob. 18.121PCh. 18.3 - Prob. 18.122PCh. 18.3 - Prob. 18.123PCh. 18.3 - A coin is tossed into the air. It is observed to...Ch. 18.3 - Prob. 18.125PCh. 18.3 - Prob. 18.126PCh. 18.3 - Prob. 18.127PCh. 18.3 - Prob. 18.128PCh. 18.3 - Prob. 18.129PCh. 18.3 - Prob. 18.130PCh. 18.3 - Prob. 18.131PCh. 18.3 - Prob. 18.132PCh. 18.3 - Prob. 18.133PCh. 18.3 - Prob. 18.134PCh. 18.3 - Prob. 18.135PCh. 18.3 - A homogeneous disk with a radius of 9 in. is...Ch. 18.3 - The top shown is supported at the fixed point O....Ch. 18.3 - Prob. 18.138PCh. 18.3 - Prob. 18.139PCh. 18.3 - Prob. 18.140PCh. 18.3 - Prob. 18.141PCh. 18.3 - Prob. 18.142PCh. 18.3 - Consider a rigid body of arbitrary shape that is...Ch. 18.3 - Prob. 18.144PCh. 18.3 - Prob. 18.145PCh. 18 - Three 25-lb rotor disks are attached to a shaft...Ch. 18 - Prob. 18.148RPCh. 18 - Prob. 18.149RPCh. 18 - A uniform rod of mass m and length 5a is bent into...Ch. 18 - Prob. 18.151RPCh. 18 - Prob. 18.152RPCh. 18 - Prob. 18.153RPCh. 18 - Prob. 18.154RPCh. 18 - Prob. 18.155RPCh. 18 - The space capsule has no angular velocity when the...Ch. 18 - A homogeneous rectangular plate of mass m and...Ch. 18 - The essential features of the gyrocompass are...
Knowledge Booster
Background pattern image
Mechanical Engineering
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.
Similar questions
SEE MORE QUESTIONS
Recommended textbooks for you
Text book image
Elements Of Electromagnetics
Mechanical Engineering
ISBN:9780190698614
Author:Sadiku, Matthew N. O.
Publisher:Oxford University Press
Text book image
Mechanics of Materials (10th Edition)
Mechanical Engineering
ISBN:9780134319650
Author:Russell C. Hibbeler
Publisher:PEARSON
Text book image
Thermodynamics: An Engineering Approach
Mechanical Engineering
ISBN:9781259822674
Author:Yunus A. Cengel Dr., Michael A. Boles
Publisher:McGraw-Hill Education
Text book image
Control Systems Engineering
Mechanical Engineering
ISBN:9781118170519
Author:Norman S. Nise
Publisher:WILEY
Text book image
Mechanics of Materials (MindTap Course List)
Mechanical Engineering
ISBN:9781337093347
Author:Barry J. Goodno, James M. Gere
Publisher:Cengage Learning
Text book image
Engineering Mechanics: Statics
Mechanical Engineering
ISBN:9781118807330
Author:James L. Meriam, L. G. Kraige, J. N. Bolton
Publisher:WILEY
Dynamics - Lesson 1: Introduction and Constant Acceleration Equations; Author: Jeff Hanson;https://www.youtube.com/watch?v=7aMiZ3b0Ieg;License: Standard YouTube License, CC-BY