An aircraft flies with a Mach number Ma1 = 0.9 at an altitude of 7000 m where the pressure is 41.1 kPa and the temperature is 242.7 K. The diffuser at the engine inlet has an exit Mach number of Ma2 = 0.3. For a mass flow rate of 38 kg/s, determine the static pressure rise across the diffuser and the exit area.
The static pressure rise across the diffuser and the exit area.
Answer to Problem 135RP
The pressure rise across the diffuser in the aircraft is
The exit area of the diffuser is
Explanation of Solution
Write the formula for velocity of sound at the inlet conditions.
Here, speed of sound at the inlet condition is
Write formula for the velocity of air at inlet.
Here, velocity of air after the normal shock is
Write the formula stagnation temperature of air at the inlet.
Here, actual (static) temperature of air at the inlet is
Consider the flow is isentropic.
Write the formula for stagnation pressure of air at inlet (isentropic condition).
Here, the static pressure of air at inlet is
Consider the diffuser is adiabatic and the inlet and exit enthalpies are equal.
When the stagnation temperatures are equal, the stagnation pressure are also equal.
Here, the static pressure of air at inlet is
Write the formula for velocity of sound at the exit conditions.
Here, speed of sound at the exit condition is
Write formula for the velocity of air at exit.
Here, the exit Mach number is
Write the formula stagnation temperature of air at the exit.
Here, actual (static) temperature of air at the inlet is
Write the formula for static pressure of air at exit (isentropic condition).
Here, the static pressure of air at inlet is
Write the formula for static pressure difference of air.
Write the formula for mass flow rate of air at exit condition.
Here, the exit cross sectional area is
Rearrange the Equation (X) to obtain
Refer Table A-1, “Molar mass, gas constant, and critical-point properties”.
The gas constant
Refer Table A-2, “Ideal-gas specific heats of various common gases”.
The specific heat at constant pressure
The specific heat ratio
Conclusion:
Substitute
Substitute
Substitute
Substitute
Here,
Substitute 0.3 for
Substitute 282 K for
Equation (VII).
Substitute 1.4 for k,
Equation (VIII).
Substitute
Thus, the pressure rise across the diffuser in the aircraft is
Substitute
Substitute
Thus, the exit area of the diffuser is
Want to see more full solutions like this?
Chapter 17 Solutions
EBK THERMODYNAMICS: AN ENGINEERING APPR
- Air flows through a long, isentropic nozzle. The temperature and pressure at the * reservoir are 1000K and 20 atm, respectively. If the Mach number at the entrance is 0.2, determine the gas velocity at the entrance. 634 m/s 127 m/s 478 m/s 254 m/s For a large centrifugal pump, the required net positive suction head is typically around 5 ft 2 ft 15 ftarrow_forwardConsider a gas with a specific heats ratio of 1.48 at the Mach number of 6.5. Determine the strength (the pressure ratio across the shock, p2/p1) of the normal shock.arrow_forwardAir enters the diffuser with a velocity of 196 m/s. Determine the flow Mach number at the diffuser inlet when the air temperature is 30 Co. Use R=287 J/kgK and k=1.4. Please keep one decimal for the final answer.arrow_forward
- Air enters the diffuser with a velocity of 171 m/s. Determine the flow Mach number at the diffuser inlet when the air temperature is 26 C°. Use R=287 J/kgK and k=1.4. Please keep one decimal for the final answer.arrow_forwardAir flows from a large tank where the pressure and temperature are 600 kPa and 800 K, respectively, through a converging nozzle with an exit area of 0.0005 m2 and discharges to the atmosphere with a pressure of 100 kPa. The flow Is lsentroplc throughout the nozzle. Determine the Mach number, temperature, pressure and velocity at the exit section, and also calculate the mass flow rate.arrow_forwardAir flows steadily through a varying cross-sectional area duct such as a nozzle at a mass flow rate of 10 lb/s. The air enters the duct at a pressure of 200 lb/in2 and 445°F with a low velocity, and it expands in the nozzle to an exit pressure of 30 lb/in2. The duct is designed so that the flow can be approximated as isentropic. Determine the density, velocity, flow area, and Mach number at each location along the duct that corresponds to an overall pressure drop of 30 lb/in2.arrow_forward
- Air flows with negligible friction through a 6-in-diameter duct at a rate of 9 lbm/s. The temperature and pressure at the inlet are T1 = 800 R and P1 = 30 psia, and the Mach number at the exit is Ma2 = 1. Determine the rate of heat transfer and the pressure drop for this section of the duct.arrow_forwardA centrifugal compressor has an impeller tip speed of 360 m/s. Determine the absolute Mach number of the flow leaving the radial vanes of the impeller when the radial component of velocity at impeller exit is 33 m/s and the slip factor is 0.90. Given that the flow area at impeller exit is 0.2 m and the total-to-total efficiency of the impeller is 89%, determine the mass flow rate.arrow_forwardAir flowing steadily in a nozzle experiences a normal shock at a Mach number of Ma = 2.6. If the pressure and temperature of air are 58 kPa and 270 K, respectively, upstream of the shock, calculate the pressure, temperature velocity, Mach number, and stagnation pressure downstream of the shock. Calculate the entropy changes of air and helium across the normal shock wavearrow_forward
- The Airbus A-340 passenger plane has a maximum takeoff weight of about 260,000 kg, a length of 64 m, a wing span of 60 m, a maximum cruising speed of 945 km/h, a seating capacity of 271 passengers, a maximum cruising altitude of 14,000 m, and a maximum range of 12,000 km. The air temperature at the crusing altitude is about −60°C. Determine the Mach number of this plane for the stated limiting conditions.arrow_forwardConsider air entering a heated duct at p1 = 1 atm and T1 = 288 K. Ignore the effect of friction. Calculate the amount of heat per unit mass (in joules per kilogram) necessary to choke the flow at the exit of the duct for an inlet Mach number of M1 = 2.2.arrow_forwardCompressed air from the compressor of a gas turbine enters the combustion chamber at T1 = 700 K, P1 = 600 kPa, and Ma1 = 0.2 at a rate of 0.3 kg/s. Via combustion, heat is transferred to the air at a rate of 150 kJ/s as it flows through the duct with negligible friction. Determine the Mach number at the duct exit, and the drop in stagnation pressure P01 − P02 during this processarrow_forward
- Elements Of ElectromagneticsMechanical EngineeringISBN:9780190698614Author:Sadiku, Matthew N. O.Publisher:Oxford University PressMechanics of Materials (10th Edition)Mechanical EngineeringISBN:9780134319650Author:Russell C. HibbelerPublisher:PEARSONThermodynamics: An Engineering ApproachMechanical EngineeringISBN:9781259822674Author:Yunus A. Cengel Dr., Michael A. BolesPublisher:McGraw-Hill Education
- Control Systems EngineeringMechanical EngineeringISBN:9781118170519Author:Norman S. NisePublisher:WILEYMechanics of Materials (MindTap Course List)Mechanical EngineeringISBN:9781337093347Author:Barry J. Goodno, James M. GerePublisher:Cengage LearningEngineering Mechanics: StaticsMechanical EngineeringISBN:9781118807330Author:James L. Meriam, L. G. Kraige, J. N. BoltonPublisher:WILEY