Sally is making a sine bar, which is used to machine angles on parts (see the given figure). She has a 1.250-inch-thick bar that needs 90° grooves machined into it for precision ground 1.0000-inch diameter cylinders. A sine bar is used by placing different thicknesses under one of the cylinders so that the proper angle is attained. Sally wants the distance between the centers of the cylinders to be D= 5.4 inches. -1.0000 Ø How deep should she mill the 90° grooves so that the top of the sine block is 2 inches tall? The depth of the mill should be inches.

Sally is making a sine bar, which is used to machine angles on parts (see the given figure). She has a 1.250-inch-thick bar that needs 90° grooves machined into it for precision ground 1.0000-inch diameter cylinders. A sine bar is used by placing different thicknesses under one of the cylinders so that the proper angle is attained. Sally wants the distance between the centers of the cylinders to be D= 5.4 inches. -1.0000 Ø How deep should she mill the 90° grooves so that the top of the sine block is 2 inches tall? The depth of the mill should be inches.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Q-3 Three blocks A, B, and C and a grooved block D have dimensions a, b, c, and d as follows: a = 40.500 0.025 mm b = 52.000 0.075 mm c = 73.000 0.015 mm d = 165.900 0.250 mm Parts A, B, and C are standard parts supplied by vendors from the market, but we are to machine part D according to the the width that you are asked to specify. (a) Determine the mean gap w0 of w and its tolerance. (b) Determine the mean size of d (d0) that will assure that w ≥ 0.050 mm.
Build the following part. Report the volume in mm^3. Assume all dimensions are in mm. A=52 B=19 Your answer should have 0 decimal places needed. Ex: 76,440 10 - 30 B
If the taper angle, large diameter, smaller diameters are respectively 2°, 44 mm, and 34mm. Find the Tape Length Find the Tape Length in mm=
In the gear train shown gear 3 is carried on arm 5, Gear 3 meshes with gear 2 and gear 4. The number of teeth on gear 2, 3 and 4 are 60, 20, and 100, respectively. If gear 2 is fixed and gear 4 rotates with an angular velocity of 100 rpm in the counterclockwise direction, the angular speed of arm 5 (in rpm) is 4 2 3 5
Bevel Gear A pair of bevel gears connects shafts at right angle with speed ratio of 2:3. The larger gear has 30 teeth with 4-tooth per inch diametral pitch. The gear is made up of 20°involute full depth. Determine the following: a) the number of teeth of pinion b) the pitch angle of gear c) the pitch angle of pinion d) the pinion diameter e) the gear diameter f) the length of cone g) the expected value of addendum h) the expected value of addendum angle i) the face angle of pinion j) the face angle of gear k) the dedendum l) the dedendum angle m) the cutting angle of pinion n) the cutting angle of gear.
SPECIFY WHERE DIMENSIONS NEED TO BE PLACED FOR THE FOLLOWING PART NOTE: JUST NOTE WHERE DIMENSIONS NEED TO BE PLACED, NO NEED TO PUT THE ACTUAL NUMERICAL VALUES JUST USE LETTERING A, B, C, ETC.
calculate the indexing for the following: 1. 914 divisions 2.1300 divisions note: the link for the calculations is provided https://www.youtube.com/watch?v=Z0FR4gzPHiU
URGENT
Two gears mounted on shafts have 10 and 15 teeth, respectively. The center distance is 10 inches. The addendum equals the module, and the clearance equals 0.135 times the module. Determine (a) pitch diameters, (b) addendum, (c) dedendum, and (d) root circles. Draw simple circles showing the diameters and the center distance. Complete solution and drawing is required.
If Gear C and gear A are having the same pitch diameter gear and gear B is twice (larger) the diameter of gear C. If gear C is turning at the speed of 50 RPM, what would be the Rotational speed of Gear B in RPM. (RPM = revolution per minute)
I will rate helpful. Thank you.
Find the Ixx value for the plate as shown below, where b1=d2=18 mm, d1=85 mm,b2=65mm. (ENTER ONLY THE VALUES IN THE BOXES BY REFERING THE UNITS GIVEN IN THE BRACKET) b1 b2 d2 d1 O The X value (unit in mm) =.