Q: 3 Figure below shows a 735 kV three-phase transposed line composed of four ACSR, 954, 000- cmil, 45/7 Rail conductors per phase with horizontal conductor configuration. The conductor diameter is 2.959 cm and a GMR of 1.173. Bundle spacing is 46 cm. Calculate the inductance per phase per km of the line. a b OO D12=44.5' D23=44.5' D13=89'

Q: 3 Figure below shows a 735 kV three-phase transposed line composed of four ACSR, 954, 000- cmil, 45/7 Rail conductors per phase with horizontal conductor configuration. The conductor diameter is 2.959 cm and a GMR of 1.173. Bundle spacing is 46 cm. Calculate the inductance per phase per km of the line. a b OO D12=44.5' D23=44.5' D13=89'

Introductory Circuit Analysis (13th Edition)

13th Edition

ISBN:9780133923605

Author:Robert L. Boylestad

Publisher:Robert L. Boylestad

Chapter1: Introduction

Section: Chapter Questions

Problem 1P: Visit your local library (at school or home) and describe the extent to which it provides literature...

See similar textbooks

Similar questions

Power system
What is the relationship between phase and line quantities in unbalanced starand delta connections? Why?
The total conductor cross section of a 537.40 kV (Peak value) three-phase overhead line with a length of 100 km is 517 mm2 and the conductor diameter is 29.6 mm. The roughness factor of the conductors is 0.8 and the distance between the conductors is 6 m. The ambient pressure along the line is 650 mmHg and the temperature is 15oC. Since there is corona discharge in only 5 km of this line, find the total Corona loss lost to the line using the Peek equation (Ed=30kVpeak/cm for Air). I would be very happy if you could be quick. :)
For the Figure 9 shown: A 65 -km long, 59 Hz, three-phase, transmission line is composed 2 parallel lines. The conductors in the lines are stranded with GMR of 15.92 -mm each. If the distance D in the figure is 2.46 m., What is inductive reactance per line in (ohm)? Figure 9 $0 D 1.732D 2D 1.732D 1.732D D b' 1.732D
Q2(a) Figure Q2(a) shows the spacing of a double circuit 3-phase overhead line. The phase sequence is UVW and the line is completely transposed. i) Critically assess the advantages of double circuit line over single circuit line Calculate the inductance per phase for 500 meter length of line using Table 2(a) data for the Figure Q2(a). Table 2(a) GMR of the line 0.01m Distance a-b' 6.m Distance c-c' 8.3m a b Figure Q2(a)
1. A Single-phase, two-wire overhead line has solid cylindrical copper conductors with 2.4 cm diameter. The conductors are arranged in a horizontal configuration with 3 m spacing. Calculate the inductance of each conductor due to both internal and external flux linkages in mH/km. (
Three Conductors of a 3-phase line are arranged at the corners of a triangle of sides 20, 10, and 18 meters. The diameter of each line conductor is 1 cm. Calculate the Capacitance per phase per km (C1) for this arrangement. Calculate Capacitance per phase per km(C2) if the spacing between the conductors are reduced by 1/4th of given spacing. NOTE -- an Capacitance inuF per Phase per Km for Arrangement 1 (C1) Capacitance in µF per phase per km for Arrangement 2 (C2)
The capacitance between the line to neutral of a three-phase 50 Hz, 66KV overhead line conductors with horizontal configuration is 8.5 x 10- Farad/ph/m. Then the line to line capacitive reactance in 2/km is ..
A Three-phase transposed line is composed of one conductor per phase with flat horizontal spacing of D-14 meters, as shown in the below figure. The conductors have a diameter of 2.6 cm and a GMR of 1.012 cm. Find the capacitance per phase per kilometer of the line a D D 2D Select one: a 0.0088 microF/Km Ob. 0.0077 microF/Km Oc1455 microF/Km Od. None of these
L-type equivalent circuit and parameters for a continuous sinusoidal phase of a 5.5 kW, 1460 rpm, line voltage 220 V and frequency 50 Hz star-connected 3-phase ASM, ignoring core (iron) losses given as follows: R1=0.21 Ohm, R2=0.18 Ohm, X1=X2=0.66 Ohm and Xm=9.9 Ohm How many times the inrush current will be the rated current when the ASM is started directly? Answer options group 3.7473 5.2280 8.0815 7.1534 1.2558 4.3763 2.6455 6.3414
please help solve this question A 100 km Three-Phase 50 Hz transposed transmission line is composed of bundle of three ACSR, 1,431,000 cmil, 47/7 Bobolink conductors as shown in Figure 2 (a). The Three-Phases (bundled Conductors) have flat horizontal spacing of 11 meters as shown in the Figure 2(a). The conductors have a diameter of 3.8 cm and a GMR of 1.5 cm. The Line is going to be replaced with a six conductor bundle of ACSR, 477,000 cmil, 26/7 Hawk conductors. The conductors have a diameter of 2.5 cm and a GMR of 0.9 cm. The new line will have a horisontal phase spacing of 14 meters as it is going to be operated at higher Voltage rating. The new line is shown in Figure 2 (b). The spacing between the bundles in Figure 2 (a) and (b) is 45 cm. Determine,a) The capacitance for each case and the percentage change in capacitanceb) The inductive reactance for each line and the percentage change.c) The inductance for each case and the percentage change ininductance