Meena Chavan Corp.’s computer chip production process yields DRAM chips with an average life of 1,800 hours and s = 100 hours. The tolerance upper and lower specification limits are 2,400 hours and 1,600 hours, respectively. Is this process capable of producing DRAM chips to specification?

Meena Chavan Corp.’s computer chip production process yields DRAM chips with an average life of 1,800 hours and s = 100 hours. The tolerance upper and lower specification limits are 2,400 hours and 1,600 hours, respectively. Is this process capable of producing DRAM chips to specification?

Principles Of Marketing

17th Edition

ISBN:9780134492513

Author:Kotler, Philip, Armstrong, Gary (gary M.)

Publisher:Kotler, Philip, Armstrong, Gary (gary M.)

Chapter1: Marketing: Creating Customer Value And Engagement

Section: Chapter Questions

Problem 1.1DQ

See similar textbooks

Related questions

Q: A. Choudhury's bowling ball factory in Illinois makes bowling balls of adult size and weight only.…

A: Statistical process control (SPC)is applying statistical techniques to determine whether a process…

Q: 57. A manufacturer of large appliances maintains a p chart for the production of washing machines.…

A: Hence, the UCL and LCL are 0.2387 and 0.

Q: do fast

Q: What is the enthalpy and volume of the steam if the saturation temperature is 318.15 C° and the…

A: Step 1: Step 2: Step 3: Step 4:

Q: Variability is very relevant to quality. That means that in order to have quality products and…

A: The difference between an ideal and an actual situation defines the law of variation. Confusion…

Q: With Six Sigma the goal is to reduce process variation to 10% of the design tolerance. True…

A: We would discuss on the concept of six sigma and analyze the problem. Please refer to step 2 for a…

Q: A nozzle is said to be a convergent nozzle_______ a)when the cross-section of the nozzle increases…

A: a) When the cross-section of the nozzle increases continuously from entrance to exit This describes…

Q: ix Sigma is the means of measuring process variations that cause defects considered as unacceptable…

A: The Six Sigma methodology was developed by Motorola in 1986. It was created with the intention of…

Q: Canine Gourmet Super Breath dog treats are sold in boxes labeled with a net weight of 15 ounces (425…

Q: I need typing clear urjent no chatgpt use i will give 5 upvotes both answers pls

Q: This exercise contains only parts a and b. a) For the given data, the x = hours (round your response…

A: NOTE: We are allowed to do the first three sub-parts only. UCL(x-DOUBLE BAR) = X-DOUBLE BAR+A2*R-BAR…

Q: do fast i will 20 upvotes.my different accounts if correct.

A: Answer:

Q: The process capability index (Cp/Cpk) Is the mean divided by the square of the standard…

A: The objective of the question is to understand the definition and interpretation of the process…

Q: El Grande Green Tea is sold in 350 milliliter cans. The standard deviation for the filling process…

A: The probability of filling more than 350 ml = 3 % ( or 0.03)The probability that filling will be a…

Q: Consider 2.5 kg of austenite containing 0.65 wt% C, cooled to 726 ° C a)Is the steel…

Q: Design specifications require that a key dimension on a product measure 100 ± 10 units. A process…

A: 1. What can you say (quantitatively) regarding the process capability? Assume that the process is…

Q: Management Science Study Guide Question The default tolerance in Solver is: A.) 0.1% B.) 0.5% C.) 1%…

A: The default setting of the tolerance option in solver is 5 or 0.05%.

Q: do fast

A: :

Q: (1) (ii) Using the appropriate control chart, determine two-sigma control limits for each case: An…

A: Control charts are statistical tools used to monitor and control a process by detecting any…

Q: - 2. Determine the state space for the system considering that a force F is applied in m2. m = 2kg 1…

A: Sure, We are asked to determine the state space for the system considering a force F applied to mass…

Q: 7.96 An insulated piston/cylinder contains 0.1 m³ air at 250 kPa, 300 K and it maintains constant…

A: Step 1:

Q: A company that makes handheld computers is trying to improve one of its poorer selling products.…

A: Here, I have to calculate the Process capability or Cp, First, let me note the formula for Cp is…

Q: Fearless Inc. has designed and tested 400 Super Sucker Vacuum Cleaner models. All of them were…

A: Total working time =400*1000 = 400000 Total breakdown time = 900+500 =1400 Total breakdown incidence…

Q: The Healthy Chocolate Company makes a variety of chocolate candles, including a 12-ounce chocolate…

A: Given data is LSL = 322 grams USL = 358 grams

Q: Please do not give solution in image format thanku Canine Gourmet Super Breath dog treats are sold…

A: Specification limits = 261±15 Upper Specification limit (USL) = 261+15 = 276Lower Specification…

Q: 3/4 roller chain is to transmit power from a 17-tooth drive sprocket to 34-tooth sprocket. Centers…

A: Step 1: Step 2: Step 3: Step 4:

Q: Two machines are currently in use in a process at the Dennis Kira Mfg. Co. The standards for this…

A: A process capability Index (Cpk) indicating the lowest value from Cpu and Cpl. The calculation will…

Q: Suppose you are analyzing processing times for a machining operation. In your analysis, you found Cp…

A: Explanation: With the given values of Cp and Cpk, the 4 sigma level, can be achieved for the…

Q: Mathematically, explain the reference tracking and disturbance rejection situations in control…

Q: A machine cuts circular filters from large rolls of material. The diameters of the filters are…

A: Given Data: Mean (μ) =2.00 cm Standard deviation (σ) = 0.02 cm Diameters between =1.95 cm &…

Q: 28. A local contractor manufactures the speakers used in telephones. The phone com- pany requires…

A: Given data, Cost of Sampling = $1.25 per speaker Cost of searching = $50 Cost of operating the…

Q: Which biasing method is most commonly used for providing temperature stability? A) Fixed bias B)…

A: In electronics, biasing is a method of establishing predetermined voltages and/or currents at…

Q: A process sampled 20 times with a sample of size 8 resulted in = 28.5 and R = 1.8. Compute the upper…

A: Natural process limits sometimes referred to as control limits, are horizontal lines placed on a…

Q: Consider a process with lower process control limit as 1.338 and upper process control limit as…

A: The objective of the question is to determine if the process is capable of meeting the design…

Question

Meena Chavan Corp.’s computer chip production process yields DRAM chips with an average life of 1,800
hours and s = 100 hours. The tolerance upper and lower
specification limits are 2,400 hours and 1,600 hours, respectively. Is this process capable of producing DRAM chips to
specification?

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1: Given data

VIEW

Step 2: Calculation

VIEW

Solution

VIEW

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Similar questions

typing
The 3-sigma limits for a process whose distribution conforms to the normal distribution includes _______ of the observed values, in the long run. Part 2 A. 99.74% B. 95.44% C. 68.26% D. 50%
Yi is fixing up his road bike to prepare for a triathlon. He looks at his tires and wonders how much he should inflate them. Which of the following variables is an outcomevariable?a. The outside temperatureb. The rolling resistancec. The number of times he presses the pumpd. The size of the tire
i will 10 upvotes plz do fast A liquid of specific gravity 0.88 and absolute viscosity 6.533 x 10^-4 Ns/m is flowing through a pipe of diameter 0.15 m at the rate of 60 litres per second. If the loss of head in 100 m length of pipe is 4.56 m. Determine whether the pipe is rough or smooth.
In a manufacturing process, 10% of the produced units are defective. If the process produces 1000 units per hour, how many defective units are produced in a day (8 hours of operation)?
do fast no use Ai answer plz
Using one dimensional heat conduction equation, compute the through-thickness temperature distribution in a 4 mm thick plate for polyester at various times during cooling from the molten state in contact with a cold metal tool at 20°C. Graph your results. i need 10 upvotes.
Suppose you are analyzing processing times for a machining operation. In your analysis, you found Cp = 2.1 and Cpk = 1.5. Given this information, which of the following sigma levels is the highest that you could claim your process is capable of meeting? 2 sigma 3 sigma 4 sigma 5 sigma 6 sigma
An insulated piston/cylinder contains 0.1 m³ air at 250 kPa, 300 K and it maintains constant pressure. More air flows in through a valve from a line at 300 kPa, 400 K, so the volume increases 60%. Use constant specific heats to solve for the final temper- ature and the total entropy generation.
At Quick Car Wash, the wash process is advertised to take less than 7 minutes. Consequently, management has set a target average of 390 seconds for the wash process. Suppose the average range for a sample of 9 cars is 8 seconds. Use the accompanying table to establish control limits for sample means and ranges for the car wash process. LOADING... Click the icon to view the table of factors for calculating three-sigma limits for the x overbarx-chart and R-chart. Factors for calculating three-sigma limits for the x overbarx-chart and R-chart Size of Sample (n) Factor for UCL and LCL for x overbarx-chart (Upper A 2A2) Factor for LCL for R-Chart (Upper D 3D3) Factor for UCL for R-Chart (Upper D 4D4) 2 1.8801.880 00 3.2673.267 3 1.0231.023 00 2.5752.575 4 0.7290.729 00 2.2822.282 5 0.5770.577 00 2.1152.115 6 0.4830.483 00 2.0042.004 7 0.4190.419 0.0760.076 1.9241.924 8 0.3730.373…
Inlet pressure P₀= 700 kPa, inlet temperature T₀ = 311 K. Since the temperature To minimum cross-sectional area Aₘᵢₙ= 12 cm² outlet pressure Pₑ=448 kPa, outlet cross - sectional area Aₑ = 20 cm² What is the value of the area where the shock wave occurs?
A large tank contains 50 gallons of water in which 10 lbs of salt is dissolved. Water containing 2 lbs of salt per gallon flows into the tank at the rate of 5gal/min .The mixture is kept well-stirred and flows out of the tank at the rate of 3gal/min Find: a) The amount of salt in the tank after 60 minutes. b) The amount of water in the tank after 60 minutes.