### Mass Diagram**Description:**The Mass Diagram provides a visual representation of earthwork volumes along a project alignment. It plots the net cumulative yardage of cut and fill against the stations of the project. #### Diagram Details:- **X-Axis (Stations):** Represents the stations along the project, ranging from 0 to 25.- **Y-Axis (Net Cumulative Yardage):** Represents the volume of cut (excavation) and fill (embankment) in cubic yards, ranging from -5000 to 5000 cu. yd.#### Key Points on the Curve:- The points where the curve crosses the Y-Axis (net cumulative yardage) at zero indicate a balance between cut and fill.- Positive values indicate fill (borrow), whereas negative values signify cut (excavation).#### Specific Points on the Curve:- Stations 0, 10, and 22 indicate zero net cumulative yardage.- Station 5 has a net cumulative yardage of -3000 cu. yd.- Station 7 shows a net cumulative yardage of 1500 cu. yd.- Station 10 illustrates a peak fill of 3500 cu. yd.- Between stations 7 and 10, and 16 and 20, corrective actions are taken to balance the fill and cut, indicated by green horizontal lines.#### Calculation:Given the Mass Haul Diagram and the following information:- **Excavation Cost:** $3.50/cu. yd.- **Borrow Cost:** $3.75/cu. yd.- **Overhaul Cost:** $1.50/sta*cu. yd.- **Free Haul Limit:** 600 ft.The task is to compute the total overhaul cost.#### Cost Calculation Options:- $10,590.00- None of these.- $1,590.00- $600.00- $990.00---### Educational Material Usage:This mass diagram is essential for civil engineering students and professionals in understanding earthwork computations and balancing cut and fill in construction projects. It helps in cost estimation and planning efficient material management strategies.

Answered: Image /qna-images/answer/b0735770-cea5-49d0-98e3-dcb0aef70425.jpg

Given the Mass Haul Diagram above and the following information: Excavation Cost: $3.50/cu. yd. • Borrow Cost: $3.75/cu. yd. • Overhaul Cost: $1.50/sta*cu. yd. • Free Haul Limit: 600 ft. Compute the total overhaul cost: $10,590.00 None of these. $1,590.00 $600.00 $990.00

Given the Mass Haul Diagram above and the following information: Excavation Cost: $3.50/cu. yd. • Borrow Cost: $3.75/cu. yd. • Overhaul Cost: $1.50/sta*cu. yd. • Free Haul Limit: 600 ft. Compute the total overhaul cost: $10,590.00 None of these. $1,590.00 $600.00 $990.00

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Related questions

Q: Net Cumulative Yardage 5000 4000 3000 2000 1000 -1000 -2000 0 -3000 -4000 -5000 08.0 ○ 9.2 0 O None…

A: The mass haul diagram is the graphical representation of the cuts and fills where the x-axis…

Q: 1,500 foot sub-division street is to be constructed. The layout will be completed in 3 days, the…

Q: A hydraulic shovel will be used to excavate sandy clay and load it into a 12 BCY dump truck. The…

A: Shovel production at 100% efficiency = 300BCY/hr , Job Efficiency = 0.80 , Truck travel time = 8 min…

Q: The following net accumulations were calculated. The free haul area begins at station 4+30 and…

A: Given Data: The free haul area begins at station 4+30 and continues to 14+30. To Determine: The…

Q: The cut and fill areas for the cross-sections at five stations along the centerline of a highway…

A: The given data is shown below:

Q: Net Cumulative Yardage 5000 4000 3000 2000 1000 O -1000 -2000 -3000 -4000 -5000 $28,875.00…

A: The mass-haul diagram is given:Borrow cost, To find: The total borrow cost.It is determined using…

Q: Give two examples of situations in which hand excavation may be required.

A: In order to level up the land ,Erecting Structures or Digging/Boring operations, Excavation and…

Q: Question Table 1 shows the list of the consecutive activities and their details for an 8-mi road…

A: Given:- Target rate of the build = 1.5 miles per week Minimum buffer time = 4 days To determine:=…

Q: Given the following information, determine the cost of excavation, the number of loads required to…

A: Given:- Material to be excavated=5225 m3Equipment cost=$280/hourOperator cost=$55/hourEquipment…

Q: b. Volume of the Work Area Building Perimeter ii Centerline of Work Area: i Volume of Work Area…

A: To find the total volume of excavation.

Q: If you are doing BIM...you should be utilizing all BIM Uses O True O False

A: BIM is utilized for making and overseeing information during the planning, construction, and tasks…

Q: If the free haul area is between 4+30 and 14+30, what is the average haul distance (ft) for the net…

A: Free Haul Area between Volume section toTo find:Average Haul Distance (ft)NOTE:Since you have posted…

Q: 1. Given the following construction progress chart, calculate the weekly cumulative progress and…

A: The following are the given information. Operation Hours 1. Clear and Grubbing 1625 2.…

Q: of equipment such as excavators or haul units must be modified by an appropriate factor based on the…

A: Let us analyse the question in step 2.

Q: Prepare a bare cost estimate based on national average prices for the following storm drain…

A: Trench size =350 ft ×4 ft × 5 ft Pipe diameter = 18 in Swell factor = 22% Shrinkage factor = 15%…

Q: 1. Compute the volume of cur material to be removed to reach sub-grade between stations 4+50 and…

A: Given Data -

Q: The free-haul distance in a highway construction contract is 150m and the overhaul price is $15/m3…

A: Given Distance between 9 and b point is let us take distace between 9 and b is…

Q: Given: A centerline of 250 LF; Anchor Blots @ 48" OC; 2-doors; 8 corners. Calculate the number of…

A: Given: The length of the centerline is 250 ft. The on-center spacing between bolts is 48 in.

Concept explainers

Pricing Excavation and Backfill

Backfill, in construction, is the activity of returning the soil and gravel that are removed during building construction or using them again to toughen and support the foundation of the building or any other structural component.

Question

### Mass Diagram

**Description:**

The Mass Diagram provides a visual representation of earthwork volumes along a project alignment. It plots the net cumulative yardage of cut and fill against the stations of the project.

#### Diagram Details:
- **X-Axis (Stations):** Represents the stations along the project, ranging from 0 to 25.
- **Y-Axis (Net Cumulative Yardage):** Represents the volume of cut (excavation) and fill (embankment) in cubic yards, ranging from -5000 to 5000 cu. yd.

#### Key Points on the Curve:
- The points where the curve crosses the Y-Axis (net cumulative yardage) at zero indicate a balance between cut and fill.
- Positive values indicate fill (borrow), whereas negative values signify cut (excavation).

#### Specific Points on the Curve:
- Stations 0, 10, and 22 indicate zero net cumulative yardage.
- Station 5 has a net cumulative yardage of -3000 cu. yd.
- Station 7 shows a net cumulative yardage of 1500 cu. yd.
- Station 10 illustrates a peak fill of 3500 cu. yd.
- Between stations 7 and 10, and 16 and 20, corrective actions are taken to balance the fill and cut, indicated by green horizontal lines.

#### Calculation:
Given the Mass Haul Diagram and the following information:
- **Excavation Cost:** $3.50/cu. yd.
- **Borrow Cost:** $3.75/cu. yd.
- **Overhaul Cost:** $1.50/sta*cu. yd.
- **Free Haul Limit:** 600 ft.

The task is to compute the total overhaul cost.

#### Cost Calculation Options:
- $10,590.00
- None of these.
- $1,590.00
- $600.00
- $990.00

---

### Educational Material Usage:

This mass diagram is essential for civil engineering students and professionals in understanding earthwork computations and balancing cut and fill in construction projects. It helps in cost estimation and planning efficient material management strategies.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1: Given Data

VIEW

Step 2: Limit of Economic Haul (LEH)

VIEW

Step 3: Procedure

VIEW

Step 4: Total Overhaul cost

VIEW

Solution

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 5 steps with 5 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A constructor has two subcontractors for his excavation work. Experience shows that in 60% of the time, subcontructor was available to do a job, whereas subcontractor B was available 80% of the time. Suppose Ea denotes the event that subcontractor A is available, ans Eb denotes that subcontractor B is available.a. Are Ea and Eb statistically independent? Explainb.Are Ea and Eb mutually exhaustive? Explainc.Are Ea and Eb collectively exhaustive? Explain
PROBLEM: From the following data, prepare the following: a) Network Diagram b) The Early Start and The Early Finish c) The Last Start and The Last Finish d) The Float ACTIVITIES TIME DURATION IN WEEKS 1-2 Demolition and Clearing 8 2-3 Excavation 14 2-5 Underground Installation 3-4 Foundation and Columns 4-6 Construction of Second Floor 4-7 Roof Framing and Flooring 5-7 Ground Floor Slab 4 5-8 Mechanical and Electrical Services 12 6-7 Construction of Exterior Walls 12 7-9 Construction of Interior Partitions 10 8-9 Mechanical and Electrical Equipment and 12 Fixtures 9-10 Painting and Finishing Work 8. 6,
Q4: Using the table of data provided, calculate the following a. The minimum time required to complete the project? b. The Critical Path for this project? 3 Activity Dependencies Duration c. The Early Start (ES) date for activity E? d. The Late Start (LS) date for activity A? e. The Late Finish (LF) date for activity F? f. The Total Float / Slack for activity H? A B 2 4 8 E A, F 3 g. The Free Float / Slack between activities D & G? B 4 G C, D, E 3 D, G 2 E 7 J G 6
What are the Methods to Aid Pile Installation?
sand is beig poured into a a conical pile in such a way that the height is always 1/3 of the radius. At what rate is sand being added to the pile when it is 48 inches high if the height is increasing 2in/min
I need the answer as soon as possible
Net Cumulative Yardage ● 5000 ● 4000 3000 2000 1000 -1000 -2000 -3000 -4000 -5000 0 O $34,000.00 Compute the total excavation cost: $10,000.00 Given the Mass Haul Diagram above and the following information: Excavation Cost: $4.00/cu. yd. Borrow Cost: $4.25/cu. yd. Overhaul Cost: $1.25/sta*cu. yd. Free Haul Limit: 600 ft. $32,000.00 5.0 None of these. -3,000 O $26,000.00 1,500 5 2,100 Mass Diagram 6.0 8.0 10 3,500 7.1 2,100 -1,100 Stations 15 7.0 8.0 6.0 20 1,500 750 25
Given the following requirements for a site project and calculate the freehaul volume? • The total haul distance is between station 9+63 and 15+21. Freehaul distance is between station 10+39 and 14+56 • Overhaul is approximately 642186 CY-ft.
Q2/ Consider Table below summarizing the details of a project and determine the following Activity 1-2 1-3 2-4 3-5 4-9 5-6 5-7 6-8 7-8 8-10 9-10 10-11 4-6 6 2 6 4 2 4 5 1 2 2 1 2 0 9 4 8 7 7 9 2 3 4 8 10 12 9 11 4 5 5 (To) (Tm) (Tp) 15 2/3 6 . 4 6 3 5 0 0 Please I want the correct solution as soon 1-Construct the project network. as possible, my friend. Thank you 2-Find the critical path and the expected project completion time. 3- What is the probability of completing the project on the week 33?
Describe the construction process for over-excavation of a building:
What is the percentage removal rate for 2.5 log removal (LR)? A. 99.51% B. 99.75% C. 99.68% D. 99.15
5. Your answer Q.14 The volume of cut which will be send outside the project from station 100 to 400 is: 1. 100000 m3 2. 3500 m3 3. 1900 m3 4. 35000m3 5. Your answer