A simply supported reinforced concrete beam is monolithically poured with slab making it applicable for a T-beam action. Thickness of slab= 101 mm, effective width of slab = 530 mm, width of beam = 313 mm, and effective depth is 530 mm. The beam is reinforced with 9-29 tension bars with fy = 420 MPa. Concrete strength f'c = 31.46 MPa. If the total service dead load moment on the beam is 330 kN-m, Determine the service live load moment (in kN-m) that can be carried by the T beam. Use USD.

A simply supported reinforced concrete beam is monolithically poured with slab making it applicable for a T-beam action. Thickness of slab= 101 mm, effective width of slab = 530 mm, width of beam = 313 mm, and effective depth is 530 mm. The beam is reinforced with 9-29 tension bars with fy = 420 MPa. Concrete strength f'c = 31.46 MPa. If the total service dead load moment on the beam is 330 kN-m, Determine the service live load moment (in kN-m) that can be carried by the T beam. Use USD.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A rectangular beam has a width of 298mm and an effective depth of 465mm. It is reinforced with 4-25mm bars. The compressive strength of the concrete is 28MPa and the yield strength of the steel is 295MPa. The ultimate moment capacity is ___.
The width and effective depth of a reinforced concrete beam is 250 mm and 440 mm respectively. The beam is provided with 4 number of 20 mm bars in the tension zone. The beam is subjected to a shear force of 150 kN (Factored). Check the requirement of shear reinforcement and provide if required. Grade of concrete is M 20 and that of steel is Fe 415. The shear strength of concrete for different percentage of tensile steel are as below. 8mm diameter vertical stirrups are available. [Vus = 0.87 fA, d/S, and (AS) > 0.4 b/ f, with the terms having usual meaning] %3D sSV % of steel Shear strength of concrete (T.) in N/mm 1.0 0.62 1.25 0.67 1.50 0.72
A continuous beam 250 mm x 450 mm carries 6 numbers of 12 mm diameter longitudinal bars as shown. The factored shear force at the point of inflection is 200 kN. Check if the beam is safe in bond. Assume M15 mix with = 15 N/mm2 and mild steel with o %3D 250 N/mm2. A clear cover of 25 mm canbe assumed. The design bond stress for mild steel bars in M15 concrete is specified to be 1.0 N/mm2. Section of point of inflection 6 no's of 12 mm dia
In the reinforced beam having a width of 300mm and an effective depth of 600 mm, caries a moment of 80 KN - m which developed a max. stress of 5 MPa in the concrete. Determine the area of steel reinforcement required if n = 9, What stress is developed in the steel? d-600 b=300 As 200 400 300 nAs 100
A rectangular beam has the dimensions b=12in., h=26in., and d=24 in. and is reinforced with three No. 11 bars so that As-4.68 in.². The normal-weight concrete compressive strength is 5000 psi. and the tensile strength (modulus of rupture) can be calculated as per ACI318-14. The Grade of the steel is 60. Determine the nominal moment strength M, and the moment capacity Mn. b=12 in. Figure 1. d=24 in. h=26 in.-
thanks for all
A T beam has a concrete and steel strengths of 28 MPa and 420 MPa. The live load is 3830 Pa. while the dead load in addition to concrete's weight is to be 4097. The density of concrete is 2400 kg/m³. The slab is 125 mm thick while the effective depth is 600 mm, the total height of T-beam of 675 mm and the bottom width of T beam is 375 mm. The length of the beam is 7 meters. The center-to-center spacing of beams is 330 cm. Determine the arrangement of main reinforcement bars. Check for clear spacing.
reinforced concrete design
i need the answer quickly
The cross section shown is for the fixed support of a propped beam that carries an allowable ultimate moment of 60 kN-m. The concrete is lightweight consisting of a lightweight coarse aggregate and a mixture of a lightweight and normal weight fine aggregate. The total volume of fine aggregate is 15 m3 and 7m3 of it are lightweight. Determine the following if the compressive strength of the concrete is 25 MPa, fy=420 MPa and the weight of the concrete is 1600 kg/m3: (a) Cracking Moment (b) Transformed Moment of Inertia. (c) Tension Stress of Concrete. (d) Transformed Compression Steel Stress. (e) Actual Tension Steel Stress. (f) Compression Force in the Concrete due to bending. (g) Total Tension Force of the reinforced concrete due to bending. 90 mm 20 mm 190 mm 70 mm 40 mm 3- Ø25 390 mm 40 mm 4- 020 70 mm 130 mm90 mm'
A beam having a width of 500 mm and a total depth of 800mm is reinforced with 6-32mm dia bars, Compressive strength of concrete is 28 MPa and yield strength of reinforcing bars is 420MP.. 640 mm 800 mm 6 #32 80 mm 80 mm Determine the following: 1. depth of the compression block 2. strain in the tension reinforcement 3. moment reduction factor 4. nominal moment capacity 5. ultimate moment capacity 6. actual steel ratio 7. minimum steel ratio 8. maximum steel ratio 9. Tension force 10. Compression force
Reinforced concrete solutions