A large tank is partly filled with water, the air space above being under pressure. A 2′′ hose connected to the tank discharges on the roof of a building 50 ft above the level in the tank. The friction loss is 18 ft. What air pressure must be maintained in the tank to deliver 0.436 cfs on the roof ? prove that the answer is 32.1 psi

Q: Q4. A conical pipe has diameters at the two ends of 0.5 m and 1.5 m and is 15metres long. It is…

A:

Q: the siphon shown in the  figure, calculate (a) The mass flow rate of oil from the tank and (b) The…

A: To determine the mass flow rate and pressure at point D.

Q: Liquid water is flowing at a rate of 25 gpm in a pipe. At one end of the pipe, the internal diameter…

A:

Q: 4. Water flows out of a large tank through a 1-cm diameter siphon tube. The siphon is terminated…

A:

Q: 1. A pipe 100 mm bore diameter carries oil of density 900 kg/m3 at a rate of 4 kg/s. The pipe…

A:

Q: 2. Oil with a S.G. pf 0.82 is flowing in a pipe under the condition below (see figure). If the total…

A: Given data as per the question The specific gravity of oil =0.82 Total head loss =3 ft Q =2.08 cfs…

Q: To what height will the jet of water rise for the conditions shown in Fig. 6.40?

A: Given data: p=12 psig

Q: Based on the layout of the water supply system, how much pressure in psi will be available at the…

A: Given:Pressure at the source, P1=75 psi=75*144 lb/ft2=10800 lb/ft2Water flow rate, Q=3.75 cfsPipe…

Q: (1) 3 m (2) B 20 mm bore diameter 60 mm bore diameter

A: Calculated volume flow rate.

Q: eter is A petroleum product is pumped at a rate of 2.32 x 10'm/s from a reservoir under atniospheric…

A: Given: The flow rate, Q = 2.32 x 10-3 m^3/s The height to be pumped, hd = 177 cm = 1.77 m The pump…

Q: U méter long met at the rate essure at th

A: given:flow rate Q=4.5m3/hd=0.025m

Q: D;= 150 mm Water D,- 50 mm Figure 358 Prosiems 3.51, 3.52. 3.51 In Fig 3.58 the losses up to section…

A: Given: The level of water in tank, H = 8 m The diameter of nozzle at A, D = 150 mm The diameter of…

Q: Problem 5.46 The flow of oil through the pipe is 0.041 m³/s. Take Po = 875 kg/m³ Pw 1000 kg/m³.…

A:

Q: A venturi meter is introduced in a 300 mm diameter horizontal pipeline carrying a liquid under a…

A:

Q: 1. Water flows at a rate of 0.020 m3/s from reservoir A to reservoir B through three concrete pipes…

A:

Q: Part C Also, a turbine can be used before the pipeline exit to produce electricity. If the used…

A:

Q: QI/ A fluid containing (water, oil, air) flowing through the tube and open to the atmosphere as…

A: From Pascal's law  Start from Pa pressure will be add when going downward and will subtract when…

Q: Pressure loss along a pipe pumping water is 6.6Pa. If the pipe is 2.1m long, what angle (in degrees)…

A: To overcome the pressure drop along the pipe, we need to consider the effect of gravity on the water…

Q: what will be the pressure gradient (kpa/m) at L=30 cm through the nozzle? At L=0, the liquid flows…

A: Write the velocity at L=0.   v0=2 m/s   Write the velocity at L=70 cm.   v70=6 m/s   Write the…

Q: 6 m^3/min of 15.6°C SAE 30 is to be pumped from a tank through 40 meters of horizontal pipe; the oil…

A: Given:Volumetric flow rate of oil, Q=6 m3/min=660m3/s=0.1 m3/sOil temperature, T=15.6oCLength of the…

Q: (b) A venturi meter with diameter at inlet D, and throat diameter D2, is used for measuring the flow…

A:

Q: Figure shows a portion of a fire protection system in which a pump draws water at 60°F (v =1.21…

A: To find: The required height h of the water level in the tank to maintain the pressure 5 psig at…

Q: Water is pumped through a vertical 2-in. new galvanized-iron pipe to an elevated tank on the roof of…

A:

Q: A hose pipe of 75 mm bore and length 450 m is supplied with water at 1.4 MPa. A nozzle at the outlet…

A:

Q: Water in a vertical (i.e., gravitational force of the fluid in the nozzle plays a role, and the…

A:

Q: A tanker carrying tolueneis unloaded to an onshore storage tank using the ship’s pumps. The pipeline…

A:

Q: Fluid (S = 1.5) drains from a large enclosed tank. The outlet is 2 m below the fluid upper surface.…

A: Given data:- specific gravity of fluid (S)=1.5 height of the free surface (h)=2m To find:- Velocity…

Q: Water is flowing through 150 mm pipe diameter and exist to atmosphere through a horizontal couple…

A:

Q: 3. Assume there is friction head loss in the siphon as shown in the Fig. 2.1, where a = 1 m, b = 4…

A:

Q: are mea (50p). Water as PA:78 kPa and Ps: 135 kPa. All the pipes are identical. If the total length…

A: Fluid is a state of matter which deforms continuously on the application of force externally,…

Q: 6.1 Dj and D2 are the inlet and outlet diameters of the pipe connected to the water turbine shown in…

A: A water turbine converts the kinetic and potential energy of water into useful mechanical work. It…

Q: 2. Three smooth rubber-lined fire hose each 60 m long and having 22 mm nozzle, are connected to a…

A:

Q: The device shown in the figure is known as a venturi. In this specific venture, the differential…

A: