Water in a vertical (i.e., gravitational force of the fluid in the nozzle plays a role, and the elevation change in the Bernoulli's Equation, if needed, should be considered) pipe is charging from an attached bend nozzle into the atmosphere as shown in Fig. 5. The nozzle's weight is 20 kg. The pipe and the nozzle are connected by a flange. The gage pressure of the flow at the flange is 35 kPa when the discharge rate is 0.1 m³/s. The volume of the bending nozzle is 0.012 m³. Calculate the vertical component of the anchoring forcing required to hold the nozzle in place and determine its direction. G 9.81 m/s². The density of water is 1000 kg/m³. Area -0.01 m² Nozzle- P-35 kPa Area-0.025 m² 0.10 ms Figure 5: Q5 35 degree

Water in a vertical (i.e., gravitational force of the fluid in the nozzle plays a role, and the elevation change in the Bernoulli's Equation, if needed, should be considered) pipe is charging from an attached bend nozzle into the atmosphere as shown in Fig. 5. The nozzle's weight is 20 kg. The pipe and the nozzle are connected by a flange. The gage pressure of the flow at the flange is 35 kPa when the discharge rate is 0.1 m³/s. The volume of the bending nozzle is 0.012 m³. Calculate the vertical component of the anchoring forcing required to hold the nozzle in place and determine its direction. G 9.81 m/s². The density of water is 1000 kg/m³. Area -0.01 m² Nozzle- P-35 kPa Area-0.025 m² 0.10 ms Figure 5: Q5 35 degree

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A 3.3-in.-diameter pipe carries 338 gal/min of water at a pressure of 27.7 psi. Determine a) the…

A: The Diameter of the pipe, D=3.3 in OR D=0.275ft Discharge, Q=338 gal/min OR Q=0.753067 ft3/sec…

Q: A non-viscous fluid is flowing through the pipe as shown. At which location is the pressure the…

Q: U - tube is used to pressure the difference in water channel. p1= 1000 kg/m3. The orange fluid in…

A: Water density = 1000 kg/m3 Orange fluid = 2000 kg/m3 Pressure at point 1 = 111 kpa a = 10 cm h = 15…

Q: Two chambers, Chamber 1 and Chamber 2 where pressure at chamber 1 p1=70 kPa, at chamber 2 the…

Q: A liquid of density ρ fl ows through a 90 ° bend as shown inFig. and issues vertically from a…

A: Given data: *The density of the liquid is ρ. *The length of the uniform porous section is L m. *Q is…

Q: FLUID FLOW xample 5: A liquid food with a density of 800 kg/m³ is being transportec 5 ton/h through…

A: Given data:Density of fluid = 800kg/m3Flow rate Q =5 ton/hr = 5/3600 m3/s

Q: has a layer of mercury under a layer of water. The mercury is flowing out through a frictionless…

Q: 4. A tank is full of water and open at the top as shown in the figure. There is a frictionless…

A: Solution: Given Data: z1 = 10 m P1=P2=PatmV1=0z2=0

Q: 4. A tank is full of water and open at the top as shown in the figure. There is a frictionless…

Q: Determine the magnitude and direction of the anchoring force needed to hold the horizontal elbow and…

Q: Required information A jet of alcohol strikes the vertical plate as shown in figure. A force of 750N…

Q: Question : Water flows through a circular nozzle, exits into the air as a jet, and strikes a plate,…

A: Answer: h = 0.314 m

Q: Consider the large open tank of water. At a height, h = 1 m, above the bottom, it is connected to a…

Q: A very popular toy on the market several years ago was the water rocket. Water (at 10°C) was loaded…

A: Given data An extremely famous toy available quite a long while back was the water rocket. Water (at…

Q: An incompressible fluid (density 1000kg/m3) is flowing through a pipe with a constriction. The pipe…

Q: A pipe inclined at 45° to the horizontal (Fig. 2) converges over a length l of 2 m from a diameter…

A: According to the continuity equation, the product of fluid velocity and cross-section area of the…

Q: Two chambers, Chamber 1 and Chamber 2 where pressure at chamber 1 p1=70 kPa, at chamber 2 the…

Q: Determine (a) the magnitude and (b) direction of the anchoring force needed to hold the horizontal…

Concept explainers

Fluid Dynamics

The study of the flow of gases and liquids, usually in and around solid surfaces, is known as fluid dynamics in physics and engineering. Fluid dynamics, for example, can be used to evaluate the movement of air through an airplane wing or the surface of a vehicle. It can also be used in ship design to increase the speed at which ships pass through water.

Question

Water in a vertical (i.e., gravitational force of the fluid in the nozzle plays a role, and the elevation
change in the Bernoulli's Equation, if needed, should be considered) pipe is charging from an attached
bend nozzle into the atmosphere as shown in Fig. 5. The nozzle's weight is 20 kg. The pipe and the
nozzle are connected by a flange. The gage pressure of the flow at the flange is 35 kPa when the
discharge rate is 0.1 m³/s. The volume of the bending nozzle is 0.012 m³. Calculate the vertical
component of the anchoring forcing required to hold the nozzle in place and determine its direction. G=
9.81 m/s². The density of water is 1000 kg/m³.
ChatGPT solution:
Nozzle
1
Area -0.01 m²
P-35 kPa
Area -0.025 m²
0.10 ms
Figure 5: Q5
35 degree

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1: Given

VIEW

Step 2: Solution

VIEW

Solution

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

If the velocity varies linearly with distance through this water nozzle, what is the pressure gradient, dp/dx, halfway through the nozzle? (p = 62.4 lbm/ft³). 30 ft/s 80 ft/s 1 ft- PROBLEM 4.44
A river discharges into a reservoir at a rate of 400,000 ft/s (cfs), and the outflow rate from the reservoir through the flow passages in the dam is 250,000 cfs. If the reservoir surface area is 40 mi?, what is the rate of rise of water in the reservoir?
(3) The cart shown below is restrained from moving by a cable connected to a fixed wall. The tank has a circular cross section of diameter D and the flow exit has a circular cross section of diameter Do. Do not assume that H(t) is constant. The fluid has density p and the exit is open to the atmosphere. Wall H D- Do Cable Vo (1) Determine H(t) and the exit velocity Vo(t). (2) Determine the tension in the cable as a function of time Your answers should be in terms of given parameters (D, Do, p, g) о,
In the following figure the long tube is filled with water at 20°C. When valve A is closed, P₁-P₂ = 75kPa. When valve A is open and water flows at 500 m³/h, P₁ – P₂ = 160kPa What is the loss in lift due to friction between 1 and 2, for the condition in which the water flows? (p = 998 kg ,g = 9,812) m 73 1) Bomba R.SA (2)
In an industrial cooling process, water is circulated through a system. If water is pump from the first floor through a 6cm diameter pipe with a speed of 0.45 m/s under a pressure of 400torr, what will be the pressure on the nest floor 4m above into a pipe with diameter 2cm? Show your solution
A pipe of diameter 11 cm conveying 200 liters/s of water has bend of angle (θ = 90⁰if last digit is zero/even and θ = 0⁰ if last digit is odd) through horizontal plane. Find theresultant force exerted on the bend if the pressure at the inlet and outlet of the bend are 15N/cm2 and 10 N/cm2respectively.
A capillary tube d =5 mm in dia meter is placed in a liquid.The surface tension is = 0.05N/m, and the angle B made by the liquid with the wetted tube wall is 60 degrees. Thedensity of the liquid is p = 500kg/m3. What is the height to which the liquid will rise in the tube?
I need the answer as soon as possible
The horizontal nozzle in the picture has a diameter 1 of 12 inches and diamter 2 of 6 inches, with inlet pressure P1 = 38 lbf/in^2 absolute and V2 = 60 ft/s. The water is at 20 degrees celsius. What is the horizontal force provided by the flange bolts to hold the nozzle in place?
kg Water (p = 1000- -) flows through the elbow below. The diameter of both the inlet and outlet is 1.1 cm, and the velocity through the nozzle is V =4.5 m/s. The outlet m³ has an angle of 0 =15 degrees. The water is at a pressure of 29 kPa (gauge). Find the magnitude of the force on the elbow. 0 V
Need help with this engineering problem. The answer needs to be in meters.
(b) Use Bernoulli's energy balance equation (E = PV + 0.5*mU²), assume volume flow rate remains constant along the pipe such that (Q=UA), and assume that pressure is balanced manometer to perform the following derivations: (i) (ii) (iii) 1- P2 in the pipe (substitute U2 in this step). an expression for P₁ an expression for P₁ P2 in the U-tube manometer. Set the expressions in parts (i) and (ii) equal to one another and derive the flow equation: U₁ = 2 (Pm -1) gh BA - 1