A large pipe with a cross-sectional area of 1.00 sq m descends 5.00 m and narrows to 0.500 sq m, where it terminates in a valve at point 1. If the pressure at point 2 is atmospheric pressure, and the valve is opened wide, and water allowed to flow freely, find the speed of the water leaving the pipe. Select one: O a. 1.14 m/s O b. 4.11 m/s O c. 7.11 m/s O d. 11.4 m/s

A large pipe with a cross-sectional area of 1.00 sq m descends 5.00 m and narrows to 0.500 sq m, where it terminates in a valve at point 1. If the pressure at point 2 is atmospheric pressure, and the valve is opened wide, and water allowed to flow freely, find the speed of the water leaving the pipe. Select one: O a. 1.14 m/s O b. 4.11 m/s O c. 7.11 m/s O d. 11.4 m/s

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

4. Consider a following figure where water goes through an oddly shaped channel. The top passage is a cylindrical tube with diameter 5 m. The bottom tube is also a cylindrical tube with diameter 10 m. 5m 30 m 100 m 20 m 10 mi a. Find the speed of water flow on the vertical tube with diameter 5 m. b. Find the speed of water flow on the horizontal tube with diameter 10 m. c. If we were to seal the horizontal tube, what is the minimum force the sealant should handle? d. What will happen to the speed of the water through vertical tube if its diameter is increased? B
A circular tank of diameter 3 m contains water up to a height of 4 m. The tank is provided with an orifice of diameter of 0.4 m at the bottom. Find the time taken by water to fall from 4 m to 2m. Take Cd= 0.60 (WITH FREE BODY DIAGRAM) CHOICES: a.47.8 seconds b.43.8 seconds c.84.7 seconds d.24.8 seconds
Please be consistent with the units. Don't convert SI to English or vice versa.
A waterpipe has a diameter of 1 inch and is constricted to 0.5 inches. If water flows from the bigger diameter to the smaller diameter and the speed of water at the bigger diameter is 78.720 inch per second, how much water flows through the pile in cubic feet per second?
4
A pump is installed in a pipe system, where at the suction side 1.0 m below the pump, an open manometer reads a vacuum of 20 cm of mercury. The pipe is 10 cm in diameter and the flow is 35 L/s of water. Find the total energy at the location of the manometer, relative to a datum, through the pump. Choices are listed below and draw its FBD. A.-4.67 m B.-2.72 m C.12.74 m D.2.56
The total head of fan is 200 m and has a static pressure of 210 mm of water gage. What is the velocity of air flowing if density is 1.16 m3/s.
3.) Water flow at the rate of 200 lit/sec through 120-m horizontal pipe having a diameter of 300 mm. If the pressure difference between the end points is 280 mmHg, determine the friction factor Answer: 0.0233 Subject: fluid mechanic Lesson: *Conservation of Energy *Fluid Flow in Pipes
1.
Water flows in a pipe and nozzle arrangement, having 0.1 diameter pipe and 0.05 m diameter nozzle that discharges to the atmosphere. Exit velocity at the nozzle is 84 m/s. a) Calculate the pressure at point 1. b) Pressure when the device is inverted.
V=06
A pump is installed in a pipe system, where at the suction side 1.0 m below the pump, an open manometer reads a vacuum of 20 cm of mercury. The pipe is 10 cm in diameter and the flow is 35 L/s of water. Find the total energy at the location of the manometer, relative to a datum, through the pump. A. 12.74 m B. 2.56 C. -2.72 m D. -4.67 m