A common annoyance in cars in winter months is the formation of fog on the glass surfaces that blocks the view. A practical way of solving this problem is to blow hot air or to attach electric resistance heaters to the inner surfaces. Consider the rear window of a car that consists of a 0.4-cm-thick glass (k = 0.84 W/mK and α = 0.39 × 10-6 m²/s). Strip heater wires of negligible thickness are attached to the inner surface of the glass, 4 cm apart. Each wire generates heat at a rate of 25 W/m length. Initially the entire car, including its windows, is at the outdoor temperature of To = 3°C. The heat transfer coefficients at the inner and outer surfaces of the glass can be taken to be hi = 6 and ho = 20 W/m² K, respectively. Using the explicit finite difference method with a mesh size of Ax = 0.2 cm along the thickness and Ay = 1 cm in the direction normal to the heater wires, determine the temperature distribution throughout the glass 15 min after the strip heaters are turned on. Also, determine the temperature distribution when steady conditions are reached (5th Ed, prob. 5.116). - Thermal symmetry line Inner Outer surface surface Glass Heater 25 W/m -0.2 cm 1 cm -Thermal symmetry line

A common annoyance in cars in winter months is the formation of fog on the glass surfaces that blocks the view. A practical way of solving this problem is to blow hot air or to attach electric resistance heaters to the inner surfaces. Consider the rear window of a car that consists of a 0.4-cm-thick glass (k = 0.84 W/mK and α = 0.39 × 10-6 m²/s). Strip heater wires of negligible thickness are attached to the inner surface of the glass, 4 cm apart. Each wire generates heat at a rate of 25 W/m length. Initially the entire car, including its windows, is at the outdoor temperature of To = 3°C. The heat transfer coefficients at the inner and outer surfaces of the glass can be taken to be hi = 6 and ho = 20 W/m² K, respectively. Using the explicit finite difference method with a mesh size of Ax = 0.2 cm along the thickness and Ay = 1 cm in the direction normal to the heater wires, determine the temperature distribution throughout the glass 15 min after the strip heaters are turned on. Also, determine the temperature distribution when steady conditions are reached (5th Ed, prob. 5.116). - Thermal symmetry line Inner Outer surface surface Glass Heater 25 W/m -0.2 cm 1 cm -Thermal symmetry line

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter1: Basic Modes Of Heat Transfer

Section: Chapter Questions

Problem 1.48P: A horizontal, 3-mm-thick flat-copper plate, 1-m long and 0.5-m wide, is exposed in air at 27C to...

See similar textbooks

Similar questions

A spherical communications satellite, 2 m in diameter, is placed in orbit around the earth. The satellite generates 1000 W of internal power from a small nuclear generator. If the surface of the satellite has an emittance of 0.3, and is shaded from solar radiation by the earth, estimate its surface temperature.
1.13 If the outer air temperature in Problem is –2°C, calculate the convection heat transfer coefficient between the outer surface of the window and the air, assuming radiation is negligible.
8.15 A mercury bath at is to be heated by immersing cylindrical electric heating rods, each 20 cm tall and 2 cm in diameter. Calculate the maximum electric power rating of a typical rod if its maximum surface temperature is .
Please check attach file
Consider a room having four identical walls of height 3.2 m and width 4 m each. In a hot summer day, the temperature of the inner surface of each wall is 32oC while the room air temperature is maintained at 24oC. The rate of heat loss from the room through the walls is Properties of the quiescent air: k = 0.0263 W/m.℃, ν = 15.89*10-6 m2/s, alpha= 22.5*10-6 m2/s, Pr = 0.707, β= 1/Tf = 0.00343 K-1. Select one: a. 282.6 W b. 35.3 W c. 1130.5 W d. 141.2 W
In a new residential project, you strongly believe thatdouble-paned windows are ‘better’ than single-paned windows.Compare the rate of heat loss between single and double-panedwindows (1.5 m x 1 m) if the thickness of each pane is (th = 0.4 cm)and (k = 0.9 W/m.K). The indoor and outdoor temperatures are 18°C and 2 °C, respectively. Thickness of the air gap between thedouble-paned windows is (th = 1 cm), and (k = 0.022 W/m.K).Image credit: Windowwhirl.
A horizontal steel pipe having a diameter of 5 cm is maintained at a temperature of 50•C in a large room where the air and wall temperature are at 20-C. The surface emissivity of the steel may be taken as ɛ=0.8. Use h = 6.5 W/m2 - "C for this situation, calculate the total heat lost by the pipe per unit length. (Hint energy loss qtotal=qconv+qrac)
A spherical interplanetary probe of 0.9-m diameter contains electronics that dissipate 150 W. The probe surface has an emissivity of 0.7 and the probe does not receive radiation from other surfaces, as, for example, from the sun. What is its surface temperature? T, = i K
An exactly same problem is already solved on bartl*by.Take reference from there.
The emissivity of galvanized steel sheet, a common roofing material, is ε = 0.13 at temperatures around 300 K, while its absorptivity for solar irradiation is αS = 0.65. Would the neighborhood cat be comfortable walking on a roof constructed of the material on a day when GS = 750 W/m2, T∞ = 16°C, and h = 7 W/m2 · K? Assume the bottom surface of the steel is insulated.
A 5-m-internal-diameter spherical tank made of 1.5-cm-thick stainless steel (k = 15 W/m-°C) is used to store iced water at 0°C. The tank is located in a room whose temperature is 30°C. The walls of the room are also at 30°C. The outer surface of the tank is gray (emissivity = 0.9), and heat transfer between the outer surface of the tank and the surroundings is by natural convection and radiation. The convection heat transfer coefficients at the inner and the outer surfaces of the tank are 80 W/m²-°C and 10 W/m²-°C, respectively. Determine the amount of ice at 0°C that melts during a 24-h period. The heat of fusion of water at atmospheric pressure is hfg = 333.7 kJ/kg.\ ANSWER:_____kg
Consider a small house with walls 3.7 m high and each of four walls is 12.2 m long. A total of eight windows areplaced in these walls, each with dimensions 0.9 m by 1.2 m. The windows are single paned with k = 0.78 W/m∙K and0.6 cm thick. The walls have an RSI value of 3.4, which means they have RA = L/K = 3.4 m2K/W resisting heat flow.The heat transfer coefficients on the inside and outside of the house are 3 and 6 W/m2K, respectively. Whatpercentage of total heat loss leaves through the windows? Neglect radiative heat loss.