A 5-mm thick mild steel plate is used to form a hollow column of 60 mm outside diameter. The column length is 1.2 m. Calculate the crippling load using Johnson’s Parabolic formula. Take modulus of elasticity and yield strength as 206 GPa and 330 MPa, respectively. Assume one end is hinged and the other end fixed. 218212 N 176745 N 930094 N 263252 N

A 5-mm thick mild steel plate is used to form a hollow column of 60 mm outside diameter. The column length is 1.2 m. Calculate the crippling load using Johnson’s Parabolic formula. Take modulus of elasticity and yield strength as 206 GPa and 330 MPa, respectively. Assume one end is hinged and the other end fixed. 218212 N 176745 N 930094 N 263252 N

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.9.5P: A steel pad supporting heavy machinery rests on Four short, hollow, cast iron piers (see figure)....

See similar textbooks

Similar questions

A steel pad supporting heavy machinery rests on Four short, hollow, cast iron piers (see figure). The ultimate strength of the cast iron in compression in 50 ksi. The outer diameter of the piers is d = 4.5 in, and the wall thickness is t = 0.40 in. Using a factor of safety of 3.5 with respect to the ultimate strength, determine the total load P that can be supported by the pad.
10-mm-diameter rod of 3003-H14 aluminium alloy is subjected to a 6-kN tensile load. Calculate the resulting rod diameter. Calculate the diameter if this rod is subjected to a 6-kN compressive load, given that the elastic modulus =70 GPa and poisson ratio=0.33
A hallow cylindrical steel column with an outer diameter of 200 mm and an inner diameter of 180 mm is subjected to a compressive load of 200 kN. The yield strength of the steel is 250 MPa. Calculate the factor of safety for the column using the maximum normal stress theory.
QUESTION 3: Square profile made of hollow 1045 steel, with a length of 6 meters with a cross-sectional area of 40x40 mm and a wall thickness of 4 mm, is subjected to an axial tensile load of "6" KN from both ends. remains. (E1045 = 207 GPa, Yield 1045 = 414 MPa) Calculate %3D %3D the final length of the rod under this tensile load in "mm".
A 125 long bar with a cross section of 12.7 mm by 3.2 mm is exposed to a 1560 N tensile load. Calculate the stress and elongation of the ABS bar (secant modulus Esecant= 2270 MPa).
Please help me with this mechanical engineering problem. Thank you.
A 900 N axial load (y direction) is applied to the column having 2 m length. The column is made of steel and support details are given below. • Specify the buckling plane (does column buckle in x-y or y-z plane)? • Which dimension of the column should be increased to support the applied load? Determine the amount of improvement/increase? Esteel=200GPA (Hint : Be careful about the support conditions (effective lengths) for different planes) 15mm 15mm front view top view Jide view
A cylindrical metal rod of 20mm diameter and 1m length is subjected to a tensile load of 60KN. To what length the cylinder should be centrally bored on one side to reduce weight by material removal, so that the total extension will increase by 10 percent under the same pull. The diameter of the hole being bored on one side is equal to 10mm. Take E= 200GPa.
A composite column is formed by placing a steel bar 20 mm diameter and 200 mm long, inside an alloy cylinder of the same length of 1.5m and whose internal and external diameters are 20 mm and 25 mm respectively. The column is then subjected to an axial load of 50 kN. Modulus of elasticity for steel and alloy is 200000MPA and 70000MPA respectively. Which of the following gives deformation of steel? Select one: a. 2.0 mm b. 3.0 mm C. 4.0 mm d. 1.0 mm
At the proportional imit, a 22 mm thick 75 mm wide bar elongates 6.3 mm under an axial load of 482 kN. The bar is 2.1 m fong. If Poisson's ratio is 032 for the materiat determine the modulus of elasticity (in GPa) Note. Do not include units in your answer. Answer 7
answer with complete solution please thank you
A 5 ft column is made from 2024-T4 Aluminum. Column has a square cross section of 2 in x 2 in. Both ends of the column are pinned. Calculate the critical load (Pcr). Note: I am having trouble understanding what the Module of Elasticity is for 2024-T4 Aluminum.