### 4.03-2. Network Address Translation (b).Consider the following scenario in which host 10.0.0.1 is communicating with an external web server at IP address 128.119.40.186. The NAT table shows the table entry associated with this TCP flow. What are the source and destination IP address and port numbers at point B?[Note: You can find more examples of problems similar to this here.]#### NAT Translation Table| WAN side addr | LAN side addr || ------------------- | ----------------- || 138.76.29.7, 5051 | 10.0.0.1, 2020 || ...... | ...... |#### Diagram Explanation:The diagram shows a network setup where several devices (IP addresses 10.0.0.1, 10.0.0.2, 10.0.0.3) are connected to a router. The router translates local addresses to global ones via Network Address Translation (NAT).- **Point A**: Data is still within the local network. The source IP (S) is 10.0.0.1 and destination IP (D) is unspecified. - **Point B**: Data is exiting the local network after NAT processing. - **Point C**: Data exits further on a public network side.- **Point D**: Data enters the local network after NAT has translated the addresses back to their internal values.The table and diagram help identify how the NAT process translates internal IP addresses and port numbers to external counterparts.#### Question:What are the source and destination IP address and port numbers at point B?**The source IP address is:** 10.0.0.1 **The destination IP address is:** 138.76.29.7 **The source port number is:** 2020 **The destination port number is:** 5051

Answer: Given host :10.0.0.1 and IP :128:119:40:186

4.03-2. Network Address Translation (b). Consider the following scenario in which host 10.0.0.1 is communicating with an external web server at IP address 128.119.40.186. The NAT table shows the table entry associated with this TCP flow. What are the source and destination IP address and port numbers at point B? [Note: You can find more examples of problems similar to this here.] S: D: B S: D NAT translation table WAN side addr 138.76.29.7, 5051 138.76.29.7 The source IP address is: The destination IP address is: The source port number is: The destination port number is: LAN side addr 10.0.0.1, 2020 10.0.0.4 S D: 10.0.0.1 138.76.29.7 2020 S: D: 5051 A 10.0.0.1 10.0.0.2 10.0.0.3

4.03-2. Network Address Translation (b). Consider the following scenario in which host 10.0.0.1 is communicating with an external web server at IP address 128.119.40.186. The NAT table shows the table entry associated with this TCP flow. What are the source and destination IP address and port numbers at point B? [Note: You can find more examples of problems similar to this here.] S: D: B S: D NAT translation table WAN side addr 138.76.29.7, 5051 138.76.29.7 The source IP address is: The destination IP address is: The source port number is: The destination port number is: LAN side addr 10.0.0.1, 2020 10.0.0.4 S D: 10.0.0.1 138.76.29.7 2020 S: D: 5051 A 10.0.0.1 10.0.0.2 10.0.0.3

Database System Concepts

7th Edition

ISBN:9780078022159

Author:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Publisher:Abraham Silberschatz Professor, Henry F. Korth, S. Sudarshan

Chapter1: Introduction

Section: Chapter Questions

Problem 1PE

See similar textbooks

Similar questions

Question 10 Consider the network shown below. The IP and MAC addresses are shown for hosts A, B, C and D, as well as for the router's interfaces. Consider an IP datagram being sent from node B to node D. 77-34-F1-EF-14-72 128,119,97,18 (1) 68-01-BC-58-AF-24 128,119,50,107 B (3) 49-FA-B0-3C-E2-7C 128,119,50.00 72-9E-4A-31-9C-42 128.119.240.15 CC-A5-81-08-AE-33 128,119,97,194 40-00-00-74-06-1F 128,119,240,52 (6) C D5-A0-EE-90-73-05 128,119,240.116 A. What is the source/destination network- or link-layer address at the location (3)? B. What is the source/destination network- or link-layer address at the location (4)? C. What is the source/destination network- or link-layer address at the location (5)? Consider an IP datagram being sent from node A to node C. D. What is the source/destination network- or link-layer address at the location (2)? E. What is the source/destination network- or link-layer address at the location (4)? F. What is the source/destination network- or link-layer…
Give me a diagram of topology and subnet of this given problem below. (Include a detailed explanation how you get it, and I will upvote) The router Central, ISP cluster, and the Web server are completely configured. You must create a new IPv4 addressing scheme that will accommodate 4 subnets using the 192.168.0.0/24 network. The IT department requires 25 hosts. The Sales department needs 50 hosts. The subnet for the rest of the staff requires 100 hosts. A Guest subnet will be added in the future to accommodate 25 hosts.
Q.5: Relate the layers of TCP / IP Model with layers of OSI Model.
Exercise 5.2.6 Use your textbook and the Internet to determine the communication steps in an ARP Request and Response. What steps are involved and how is each message sent ( broadcast to all devices or unicast to a single device)? 1. Based on the interface and the forwarding IP address, ARP consults the appropriate ARP cache for an entry for the forwarding IP address. If an entry is found, ARP skips to step 6. 2. If the entry is not found, ARP builds an ARP Request frame containing the MAC address of the interface sending the ARP Request, the IP address of the interface sending the ARP Request, and the forwarding IP address. ARP then broadcasts the ARP Request using the appropriate interface. 3. All hosts receive the broadcasted frame and the ARP Request is processed. If the receiving host's IP address matches the requested IP address (the forwarding IP address), its ARP cache is updated with the address mapping of the sender of the ARP Request. If the receiving host's IP address does…
Let IP address 200.210.56.76/28 determine the subnet mask, subnet id, broadcast address, and total number of subnets and hosts in subnets. And use a nice illustration to demonstrate Remote monitoring.
An IP address can be written as a 32-bit number. For a class B network, the two most significant bits are set to 10. The 16 most significant bits are used as a network ID, and the 16 least significant bits are used as a host ID. However, the host ID cannot be all O's or all 1's. How many hosts (i.e., host IDs) can there be on a class B network? Type your answer.
Consider the subnet address 210.84.40.0, divided into 3 subnets. If we want to maximize the number of hosts per subnet, what subnet mask should we use? What would the numbers of the first 2 and last 2 subnets be, along with their address range and their broadcast? Explain your answers.
2. The following illustration shows a transmission from Host A to Host B using Network Address Translation (NAT). Host A is located inside a Local Area Network (LAN) with an IP address of 192.168.1.2. The LAN is connected to the Wide Area Network (WAN), i.e. the Internet, through a router R1 that conducts NAT. R1 has two interfaces with an internal LAN IP address (192.168.1.1) and and external WAN IP address (127.45.10.35). Host B is located outside the LAN and is a well-known server, e.g., Google's server. Host B has an IP address of 130.160.23.45. Port numbers for the application components running at both hosts are provided in the figure. For a single message M1 being sent from Host A to Host B, please fill in the blanks in the illustration below with the source IP address and Port number at Host A and at the Router R1. Any information not provided may be assumed, however, please state your assumption clearly. Host A Local Area Network (LAN) IP: 192.168.1.2 Port: 5252 Source IP…
Question 3 Consider a satellite channel running TCP/IP as shown in the figure below. Due to the long round trip time (RTT) and high bit error rate (BER) the conventional TCP congestion mechanism doesn’t work well in a satellite transmission system. 3.1 Assume traditional TCP/IP is used and that the congestion window of the TCP sender is 10k bytes, and it is in congestion avoidance (CA) state with the threshold variable equal to 8k bytes. Now, the sender receives 3 duplicated acknowledgements (ACKs). As a result, explain the effect on the congestion window size and the threshold.
Consider the LAN below consisting of 12 computers (A-L) connected by two Ethernet bridges. At t=0 the bridging table entries for both bridges are empty. At t = 1, node L sends to node E, and node E replies immediately (well before the next time step). What are the (MAC address, interface) entries in the bridging tables right after these transmissions? Note: interface = port number a) Left-hand-side bridge: (L,15), (E, 8). Right-hand-side bridge: (L,7), (E, 5). b) Left-hand-side bridge: (L,8), (E, 8). Right-hand-side bridge: (L,7), (E, 7). c) Left-hand-side bridge: (L,15), (E,5). Right-hand-side bridge: (L,7), (E, 8). d) Left-hand-side bridge: (L,8), (E,8). Right-hand-side bridge: (L,7), (E, 7).
Please idk if i got this right
15. Consider the following plot of TCP window size as a function of time (y axis is the congestion window size (segments), and x axis is the transmission round). Assuming that TCP Reno is the protocol experiencing the behavior shown above, answer the following questions. 18 16 14 12 10 00 8 6 4 2 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1) Identify the intervals of time when TCP slow start is operating. 2) After the 5th transmission round, is segment loss detected by a triple duplicate ACK or by a timeout? 3) What is the value of Threshold at the 7th transmission round? 4) What is the value of Threshold at the 15th transmission round?