2.49 Calculate the Bogue composition of the cements with the oxide com-position given below.OxideContent, per centCement ACement BCement C22.468.20.34.620.764.25.33.92.01.5SiO,25.061.03.0Fe,O,Al,O,SO,Free lime4.0CaO2.43.32.51.0Answer:CementCompound, per centCSCSC,ACAF69.320.012.056.610.811.75.51.30.99.116.1AC64.5Find the solution mathematically only for b and c

Given:- The Oxide composition for cement A, cement B, and cement C is given below To determine:- The…

2.49 Calculate the Bogue composition of the cements with the oxide com- position given below. Oxide Content, per cent Cement A Cement B Cement C SiO, 22.4 68.2 0.3 25.0 61.0 3.0 Fe,O, AI,O, SO, CaO Free lime 20.7 64.2 5.3 3.9 2.0 1.5 4.6 2.4 3.3 4.0 2.5 1.0 Answer: Cement Compound, per cent CS CS C,A CAF 69.3 20.0 64.5 12.0 56.6 10.8 11.7 5.5 1.3 0.9 9.1 16.1 A Find the solution mathematically only for b and c

2.49 Calculate the Bogue composition of the cements with the oxide com- position given below. Oxide Content, per cent Cement A Cement B Cement C SiO, 22.4 68.2 0.3 25.0 61.0 3.0 Fe,O, AI,O, SO, CaO Free lime 20.7 64.2 5.3 3.9 2.0 1.5 4.6 2.4 3.3 4.0 2.5 1.0 Answer: Cement Compound, per cent CS CS C,A CAF 69.3 20.0 64.5 12.0 56.6 10.8 11.7 5.5 1.3 0.9 9.1 16.1 A Find the solution mathematically only for b and c

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter2: Soil Deposits-origin, Grain-size, And Shape

Section: Chapter Questions

Problem 2.15CTP: In concrete work, Fuller and Thompson (1907) suggested that a dense packing of grains can be...

See similar textbooks

Similar questions

Based on the data in Table P9.32, determine the design binder content for aSuperpave mix design for a 15 million ESAL. Assume a 12.5 mm nominalmaximum aggregate size.
please provide step by step solutions and draw the lever on the graph as well. i know the answers. (c) About 1250 C (d) Fe3C, cementite (e) About 0.7 wt% C, about 72% (f) About 40%, no. (h) Draw the microstructure of a 1.5 wt.% C material that has been heated to 1200 C and then slowly cooled to 600 C. Clearly label all phases.
CapsL 8 A Determine the range of final gradation of selected aggregates to prepare the job mix formula for binder course of a mixing plant according to data indicated in table below? Use the following tolerances: ± 6 % for 4.75 mm and above aggregate sizes, ± 4% for 2.36 and 0.30 mm aggregate sizes, and ± 2 % for 0.075 mm aggregate size. Note: use first try with 30%, 35%, 30% and 5% for groups A, B, C and D, respectively. Sieve Size 25 19 12.5 9.5 4.75 2.36 0.3 0.075 A (30%) Coarse Aggregate 100 99 56 31 4 0 0 0 % Passing B (35%) Natural Sand 100 100 100 100 100 89 15 4.2 C (30%) Crushed Sand 100 100 100 100 92 56 9 5 D (5%) Filler 100 100 100 100 100 100 97 88 Specification 100 90-100 76-90 56-80 35-65 23-49 5 19 39 Job Mix Formula Job Mix Formula Limitation 13.6
3. (a) Fine aggregate is batched in wet moisture state and had the batch weight of 40 kg. If the moisture content of the fine aggregate is 6% and the absorption capacity is 2%, determine the free water content in the aggregate. [Ans: 1.51 kg] (b) Coarse aggregate is batched in air-dry state and had the batch weigh of 80 kg. If the moisture content of the coarse aggregate is 1% and the absorption capacity is 1.5%, determine the free water required (effective absorption) to bring the aggregate to saturated surface dry condition (SSD) [Ans: 0.396 kg] (c) It the fine aggregate is batched (40 kg) in wet moisture state and coarse aggregate is batched (80 kg) air-dry state (as given in part (a) & (b)), determine the mixing water required if the free water cement ratio is 0.50, and the batch weight of cement is 20 kg. [Ans: 8.9 kg]
"A sieve analysis test was performed on a sample of fine aggregate and produced the following results:Sieve, mm 4.75 2.36 2.00 1.18 0.60 0.30 0.15 0.075 pan.Amount retained, g 0 33.2 56.9 83.1 151.4 40.4 72.0 58.3 15.6 .Calculate the percent passing each sieve, and draw a 0.45 power gradation chart with the use of a spreadsheet program. The specific steps or functions selected in the following description can vary somewhat depending on the version of the spreadsheet program being used.Calculate the fineness modulus of the sieve analysis results of Sample Problem
A sieve analysis test was performed on a sample of fine aggregate and produced the following results:Sieve, mm 4.75 2.36 2.00 1.18 0.60 0.30 0.15 0.075 panAmount retained, g 0 33.2 56.9 83.1 151.4 40.4 72.0 58.3 15.6Calculate the percent passing each sieve, and draw a 0.45 power gradation chart with the use of a spreadsheet program. The specific steps or functions selected in the following description can vary somewhat depending on the version of the spreadsheet program being used.
Please solve points 4 and 5 only
Coarse aggregate is placed in a rigid container and rodded with a tamping rod. Volume of the bucket is 0.00945 m³, weight of empty bucket is 82.5N, weight of bucket filled with dry rodded coarse aggregate is 249.26N. Determine; a) the bulk unit weight of dry aggregate b) the percent voids in the aggregate if the bulk dry specific gravity of the aggregate is 2.63.
a. For an aggregate sample, if you know that the apparent relative density is 2.72 and the water absorption is 1.2%. The dry mass of the aggregate is 514 gm. Find the bulk and saturated surface dry (SSD) relative density values? b. Why does the maximum size of aggregate depend on the clear spacing between bars? Show with a simple sketch. Note: Please answer both a and b... Please answer the both questions.. I don't want single b answer.. thank you
Define the following terms:a. Saturated surface-dry condition of aggregatesb. Absorption of aggregatesc. Free water on aggregatesd. Referring to Figure , which portion of the water in the aggregate reacts with the cement in the PCC mix?
Define the following terms: (don’t just provide the equation, explain what the equationrepresents). a). Saturated Surface-Dry condition of aggregate b). Absorption of aggregates c). Free moisture of aggregates. d). What does a negative free moisture mean and why is it important to consider forconcrete design?
Construction material