2. What is the "flow work" (or "flow energy") of a fluid in a closed and adiabatic system, which has no work interaction with the environment? 3. List the forms of energy that a flow might carry outside the control volume. 4. What is the main role of a nozzle? 5. State one similarity and one difference between the turbine and the compressor 6. Consider a tank that is rigid, insulated, initially evacuated and is connected via a valve with a supply line (tube) that carries steam. The valve is then opened and steam flows into the tank, until the pressure in the tank equals that in the tube. How is the temperature in the tank at the end of the process related to the temperature in the tube? Explain.

2. What is the "flow work" (or "flow energy") of a fluid in a closed and adiabatic system, which has no work interaction with the environment? 3. List the forms of energy that a flow might carry outside the control volume. 4. What is the main role of a nozzle? 5. State one similarity and one difference between the turbine and the compressor 6. Consider a tank that is rigid, insulated, initially evacuated and is connected via a valve with a supply line (tube) that carries steam. The valve is then opened and steam flows into the tank, until the pressure in the tank equals that in the tube. How is the temperature in the tank at the end of the process related to the temperature in the tube? Explain.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a certain community, they are using steam-powered turbines to produce electricity. Steam flows adiabatically in a turbine through a 3" pipe at a velocity of 10 ft/s. It exits through the exhaust with a standard 10" pipeline. Calculate the power output in Btu/s of the turbine. Condition of steam at the entrance: 200 psi, 600°F; at the exit: 4 psi, 160°F. [Hint: Power is the product of work and mass flow rate.]
Q#4: A pressurized tank of water has a 10-cm-diameter orifice at the bottom, where water discharges to the atmosphere. The water level is 3 m above the outlet. The tank air pressure above the water level is 300 kPa (absolute) while the atmospheric pressure is 100 kPa. Neglecting frictional effects, determine the initial discharge rate of water from the tank. Air 300 kPa 3 m 10 cm
... Moving to another question will save this response. Question 7 Compressed air with a flowrate of 8 kg/min flows through a two-stage turbine and heat exchanger system as follows: • At the entrance to the system (point 1), the pressure of the air is 8 bar and the temperature of the air is 359 K. • From 1-2 the air passes through a heat exchanger which increases its temperature to 922 K. • From 2-3 the air passes through a turbine, with a pressure ratio of 3 (i.e. P₂/p₂=3). This first turbine has an isentropic efficiency of 65%. • From 3-4 the air passes through a second heat exchanger, which increases its temperature back up to 922 K. • From 4-5 the air passes through a second turbine with a pressure ratio of 3 and an isentropic efficiency of 80%. The properties of air are: cp = 1.005 kJ/kgk, cv = 0.718 kJ/kgK, R = 0.287 kJ/kgK, and y= 1.4. Select the correct value for each of the following values: ₂) a. The heat transfer to the air in the first heat exchanger (i.e. ₁) i in kW: b.…
This is Problem 13 of Chapter 3 in Sustainable Energy by Richard Dunlap, 2nd Edition. I need help solving it: A coal-fired generating station has an efficiency of 38% and produces an average electrical output of 1000 MWe.(a) How much coal does it burn per second (kg/s)? Assume the coal is bituminous.(b) How much heat (in joules) is released to the environment per second?(c) How many liters of water at 20°C could the heat in part (b) boil (at STP) per second? For c, here is my idea: use Q = mc(change in T). Here change in T is (100 C - 20 C) or 80 C and c = 4200 J/(kg C) so I can solve for m. Question: I need the density of water to find liters, but density changes with temperature. So, do I use the regular 1000 kg/m^3 or something else?
53.1 64.4 68.6 489 523 atio of 3 (i.e 581 613 659 ge turbine ir is 10 bar reases its t which increa ssure ratio 18.7 21.4 24.4 30.2 37.9 44.5 = 0.287 kJ/k 683 711 744 773 808 er system as foll re of the air is 4 K. > first turbine ha e back up to 90 pic efficiency of !) in kW: 12 >erfectly isentropic (i.e. T') in K:
4.1 A gas turbine power plant is operating as follows. Compressor intake air temperature T, is 306 K, pressure p, is 100 kPa, and compressor pressure ratio B is 15. TIT T, is 1490 K. Isentropic efficiency of compressor N, is 0.88, and that of turbine n is 0.91. Air mass flow rate mi, is 636 kg/s. Fuel mass may be ignored. Calculate (i) actual temperatures at compressor and turbine exits, (ii) plant actual net specific work per kg air, (iii) plant actual power output, (iv) plant actual rates of heat addition and rejection, and (v) plant actual thermal efficiency.
The figure below provides steady-state data for water vapor flowing through a piping configuration where V1 = 35 m/s and T1 = 200°C. At each exit, the volumetric flow rate, pressure, and temperature are equal. P2 = 4.8 bar T = 320°C 1 Water vapor (AV)2 = (AV)3 V, T Aj = 0.2 m? P1 = 5 bar 3 P3= 4.8 bar T3 = 320°C Determine the mass flow rate at the inlet and exits, each in kg/s. i kg/s i kg/s i kg/s
2. A turbine operates under steady flow conditions receiving steam at the following state: pressure 1200 kilo pascal, temperature 188 degrees celsius, Enthalpy 2785 kilojoule per kilogram, speed 33.3 meter per second and elevation 3 m the steam leaves the turbine at the following state; pressure 20 kilo pascal, enthalpy 2512 kilojoule per kilogram, speed 100 m per second and elevation 0 m. Heat is lost to the surroundings at the rate of 0.29 kilojoule per second. if the rate of steam flow through the turbine is 0.42 kg per second. What is the work in kJ/kg and what is the power output of the turbine in kw?
Steam flows into a turbine at the rate of 10 kg/s and 10 kW of heat are lost from the turbine. Ignoring elevation and kinetic energy effects, calculate the power output from the turbine.Note : h1 = 2739 kJ /kg and h2 = 2300.5 kJ / kg CHOICES: A. 4605 kW B. 4973 kW C. 4375 kW D. 4000 kW
Steam enters a control yolume that has one inlet and two exits. At the inlet (location 1) with a diámeterof 5.2 cm, the Steam has 100 bar , 360°C , and as mass flow rate of a Rg/sec. Through one exit (location 2), 15.% of the incoming mass flow rate Teaves the Control volume and the remainder leaves through the otner exit (locatión 3). For steady state opeaton, calculake the mass flow rate at locatlon 3 in kg/sec using 5 Signifigant figiures. रप्री द
Superheated steam at 40 bar absolute and 500°C flows at a rate of 250 kg/min to an adiabaticturbine, where it expands to 5 bar. The turbine develops 1500 kW. From the turbine thesteam flows to a heater, where it is reheated isobarically to its initial temperature. Neglectkinetic energy changes.(a) Write an energy balance on the turbine and use it to determine the outlet streamtemperature.(b) Write an energy balance on the heater and use it to determine the required input (kW) tothe steam.(c) Verify that an overall energy balance on the two-unit process is satisfied.(d) Suppose the turbine inlet and outlet pipes both have diameters of 0.5 meter. Show that itis reasonable to neglect the change in kinetic energy for this unit.