1. Shaper (#*) Machine function and design requirements: The main function of this machine is to make surface more smooth; The required movements are: Reciprocating movement of planer knife and feed movement of the bow. It is required that the cutting speed is uniform, while the quirkily return is included. The basic data is: principal axis rotation speed is 60 r/min, the max length is less than 450 mm, the distance between working surface and the floor is 800 mm. Travel speed ratio coefficient is 1.5, allowable pressure angle 15°, cutting quantity is 0.1~0.5 mm. Requirements: 1. Freedom calculations; 2. Force analysis; 3. Make this machine, and display; please give a solution with given condition.

1. Shaper (#*) Machine function and design requirements: The main function of this machine is to make surface more smooth; The required movements are: Reciprocating movement of planer knife and feed movement of the bow. It is required that the cutting speed is uniform, while the quirkily return is included. The basic data is: principal axis rotation speed is 60 r/min, the max length is less than 450 mm, the distance between working surface and the floor is 800 mm. Travel speed ratio coefficient is 1.5, allowable pressure angle 15°, cutting quantity is 0.1~0.5 mm. Requirements: 1. Freedom calculations; 2. Force analysis; 3. Make this machine, and display; please give a solution with given condition.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A 16mm Solid carbide tool with two teeth is used to machine Aluminium using the cutting speed of 275.00 m/min. The feed per tooth is 0.28 mm. What is the right feed rate to use to program the CNC machine? Your Answer: Answer
Task 4 Here students need to calculate (a) The cutting speed (b) Turning time (c) Amount of material removed. For a specimen as shown below, if spindle rotates at N = 360 rpm, number of pass = 03, feed rate= 0.2mm/rev, if density of material=7.85× 10-6 Kg/mm³. Appendix Volume for Cylinder = rr?h Volume of frustum= nh (a?+b²+ab)/3 radii 'a' & b' height(Length) 'h'. b-a Taper angle : = tan20 h TDN Cutting speed:V : meters/min 1000 Where: V = Cutting speed in Meter/minute. T= 3.14 D = Diameter of work piece in mm N = rpm Cutting Time Length of the job to be turned NO.of cuts Time to turn mins. Feed/Rev rpm Amount of Material Removed = Original Mass – Machined Mass Original Size of Component 380 mm Machined Component 80 mm 100 mm 120 mm 6 20mm + 25mm + 40mm + 25mm 030mm
In a turning operation, cutting speed =200 m/min; feed = 0.25mm mm/rev, and depth of cut = 4.00mm Thermal diffusivity of the work material = 20m mm^2/s and volumetric specific heat =3.5(10^ -3 )J/mm^ 3 -C If the temperature increase above ambient temperature (20degreesC) is the angle measured by a tool-chip thermocouple to be 700degreesC, determine the specific energy for the work material in this operation.
2 1.63 With a carbide tool, the temperature in a cutting operation is measured as 650K when the speed and the feed is 0.05mm/rev. W hat is the approximate temperature if the speed is doubled? W hat speed is required to lower the maximum cutting temperature to 480K?
A NC lathe cuts two passes across a cylindrical workpiece under automatic cycle. The operator loads and unloads the machine. The starting diameter of the work is 3.00 in and its length = 10 in. The work cycle consists of the following steps (with element times given in parentheses where applicable): 1 - Operator loads part into machine, starts cycle (1.00 min); 2 - NC lathe positions tool for first pass (0.10 min); 3 - NC lathe turns first pass (time depends on cutting speed); 4 - NC lathe repositions tool for second pass (0.4 min); 5 - NC lathe turns second pass (time depends on cutting speed); and 6 - Operator unloads part and places in tote pan (1.00 min). In addition, the cutting tool must be periodically changed. This tool change time takes 1.00 min. The feed rate = 0.007 in/rev and the depth of cut for each pass = 0.100 in. The cost of the operator and machine = $39/hr and the tool cost = $2.00/cutting edge. The applicable Taylor tool life equation has parameters: n = 0.26 and…
a) What is the main function of lathe machine? b) What is the function of Boring in Lathe machine? c) Gives three (3) examples of surface type that Lathe machine can produce? d) What the difference between CNC and turret Lathe machine? e) Give two (2) advantages and disadvantages of CNC machine.
1. Peripheral milling is performed on the top surface of a rectangular work part that is 350 mm long by 60 mm wide. The milling cutter is 75 mm in diameter and has five teeth. It overhangs the width of the part on both sides. Cutting speed 55 m/min, chip load 0.25 mm/tooth, and depth of cut 5 mm. Maximum material removal rate during the cut will be mm/s. (a) 1419, (b) 1429, (c) 1439, (d) 1449, (e) 1459
(c) Refer to Figure 3(c) and assuming that D = 240 mm, w = 66 mm, I = 700 mm, d = 3.5 mm, v = 0.65 m/min, and N = 300 rpm. The cutter has 8 inserts, and the workpiece material is a high-strength aluminum alloy. Calculate: (i) (ii) (iii) feed per tooth material-removal rate cutting time Workpiece Workpiece Cutter Cutter Machined surface Figure 3(c)
The tool life equation for HSS tool is VTO.14f 0.7d0.4 = Constant. The tool life (T) of 30 min is obtained using the following cutting conditions: V = 45 m/min, f = 0.35 mm, d = 2.0 mm If speed (V), feed (f) and depth of cut (d) are increased individually by 25%, the tool life
Q.1 A turning operation uses a rotation speed = 150 rpm, feed = 0.38 mm/rev, and depth of cut = 5.00 mm. The diameter of the workpiece before cut is 50mm and it is length was 350mm. .Calculate the material removal rate
Problem 2. (Determining Cutting Speeds in Machining Economics) A turning operation is performed with HSS tooling on mild steel, with Taylor tool life parameters n = 0.12, C = 60 m/min. Work part length = 450 mm and diameter = 80 mm. Feed = 0.20 mm/rev. Handling time per piece = 4.0 min, and tool change time = 1.5 min. Cost of machine and operator = $27/hr, and tooling cost = $2 per cutting edge. Find the a. cutting speed for maximum production rate and b. cutting speed for minimum cost Problem 3. (Production Rate and Cost in Machining Economics) For the two cutting speeds computed in problem 2, determine: the hourly production rate and a. b. the cost per piece.