Answered: 1. Determine the nominal axial…

1. Determine the nominal axial compressive strength for the following cases: a. L= 15 ft b. L= 20 ft L E=29000 ksi R=1.94 Fy = 50 K=1.0 A=9.71 W10 x 33 A992 steel

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Determine the design strength of the beam(properties given below) and the safe service live load if the service dead load is 320 kN.m.Use f'c =22 Mpa and fy=415 MPa. given properties: b=400 mm d'=70 mm d=620 mm As=10-28 mm A's=3-25 mm bars hello please answer this thanks ☺️
The cantilever beam shown below has the cross-section on the right portion. If the allowable stresses are 62 MPa shear and 103 MPa tension at point A (just below the flange), determine the maximum allowable load P.
AWT305 x 41 standard steel shape is used to support the loads shown. Assume w = 46 kN/m, LAB = 1.8 m, Lec = 3.6 m, and LcD = 1.8 m. Consider the entire 7.2 m length of the beam and determine: (a) the maximum tensile bending stress at any location along the beam (enter a positive answer), and (b) the maximum compressive bending stress at any location along the beam (enter a negative answer). B LAB LBC LCD WT305 x 41 Answer: MPa (a) OmaxT= MPa (b) ơmaxc=
AWT305 x 41 standard steel shape is used to support the loads shown. Assume w = 44 kN/m, LAB = 1.1 m, LBc = 2.2 m, and LcD = 1.1 m. Consider the entire 4.4 m length of the beam and determine: (a) the maximum tensile bending stress at any location along the beam (enter a positive answer), and (b) the maximum compressive bending stress at any location along the beam (enter a negative answer). B LAB LBC LCD WT305 x 41 Answer: MPa (а) ОmaxT MPa (b) Omax.C
1. For the cantilever beam shown below the required area of steel is 2.12 in?. 3 #8 bars are used. The end of each bar includes a standard 90 degree hook that is terminated at 2.5 in. from the outside face of the supporting column. Is the anchorage length sufficient to fully develop the tensile strength of each of the steel bars?Assumptios are as follows: fe = 4000 psi ; fy = 60000 psi ; uncoated coated bars ; light weight concrete; Sufficient stirrups provided 1.93 3#8 3#8 |2,5" 12" 12"
A W21×101 is used as a compression member with one end fixed and the other end free. The length is 12 feet. What is the nominal compressive strength if Fy = 50 ksi? Note: If this is a slender-element compression member, then you must use equations of AISC Section E7. 12 feet W21×101
SOLVE THIS PROBLEM USING THE SLOPE DEFLECTION EQUATIONS: A bolted connection shown is connected by 20 mm diameter bolts with an edge distance of 50 mm and the distance center to center of holes to be 75 mm. Assume that the deformation at bolt hole is a design consideration. The bolted connection is carrying an ultimate load Pu = 1500 kN, Fy = 248 MPa, Fu = 400 MPa and Fn = 415 MPa. Determine the following: (1) Design bearing strength of one bolt. (2) Design shear strength of one bolt. (3) The number of bolts are required for the connection show. P 12 mm plase P= I S00 kN 18 mm platr 12 mm plate
Pls help me answer. Thank you.
Determine the maxinum tensile stress and compressive stress for the beam with the given cross section. Show your complete solution.
A W12x79 of A573 Grade 60 (Fy = 415 MPa) steel is used as a compression member. It is 8 m long, pinned at the top fixed at bottom with additional lateral support at mid height in the weak direction. The properties are as follows: Ag = 14,500 sq.mm, Ix= 258.6 x10^6 mm ^4 Iy=84.375 x 10^6 mm^4. 58. Calculate the nominal axial strength of the column in KN
Determine the Euler Buckling axial compressive load of W 12 x 72 section having a length of L =59 ft and fixed ends, P e = ____ kips. Assume that the column is made of A441 steel with E = 29 x 10 3 ksi, and assume that the normal stress generated by P is still within the elastic range of the material. Reminder: use the minimum moment of inertial of the cross section. Please calculate your answer to 1 decimal place.
AW18 x 40 standard steel shape is used to support the loads shown on the beam. Assume P = 20 kips, w = 4.8 kips/ft, LAB = 4.2 ft, Lec = 4.2 ft, and Lco = 16.0 ft. Determine the magnitude of the maximum bending stress in the beam. P B C D LAB LBC LCD Answer: Omax = i ksi