BME162 - 2022 - Participation Activity #2

Analysis and Interpretation of vertical Ground Reaction Forces. In this study, a volunteer was asked to walk on two force platforms under two different conditions. Condition 1- Normal Walk (NW), condition 2 - walking over an obstacle (OW). The right limb was the one to step on platform 1 in both conditions. The force platforms were used to measure the vertical ground reaction forces on the right limb. Data was collected on Vicon (Nexus) software and the attached graphs ( mean NW/OW, Mean (+-)1SD NW/OW) were created. Analyse and Interpret the graphs attached.

Learning Goal: To describe the shape and behavior of cables that are subjected to concentrated and distributed loads. Part A Structures often use flexible cables to support members and to transmit loads between structural members. Because a cable's weight is often significantly smaller than the load it supports, a cable's weight is considered negligible and, therefore, not used in the analysis. In this tutorial, cables are assumed to be perfectly flexible and inextensible. Thus, once the load is applied the geometry of the cable remains fixed and the cable segment can be treated as a rigid body. Cables of negligible weight support the loading shown. (Figure 1) If W, = 85.0 N , W, = 510 N, YB = 1.40 m, yc = 2.80 m, yp = 0.700 m, and zc = 0.850 m, find zg. Express your answer numerically in meters to three significant figures. > View Available Hint(s) VO AEoI vec IB = 2.048 m Submit Previous Answers X Incorrect; Try Again; 4 attempts remaining Part B Complete previous part(s) W2 O…

Please answer the 4th question

Please help me solve this question for part A and part B  label final answer with correct units for P = and D =

Parts a and b were answered in a previous question, part c was unanswered this is the entire question :)

Basic Manufacturing Process with 2 Job Types + Inspection Time between job arrivals at a machining station is exponentially distributed with mean 4.4 minutes. There are 2 types of jobs to be processed 30% of which is Type 1 and, 70% are of Type 2. Processing times are exponentially distributed. Mean processing time for Type 1 is 4.8 minutes, for Type 2 it is 2.5 minutes. After the job is processed, they go through an inspection process with one single inspector and an inspection time with triangular distribution (1,2,3.5). Inspector decides whether the part is good enough, scrap or should be reworked. 80% of the parts produced is good, 10 % is scrap and the rest needs rework. Rework is done by the same manufacturing machine. The priority among the parts will be Part1 first, part2 second and reworks of both type comes later. Rework time is normally distributed with mean 2 minutes and 0,2 std dev. Simulate the system for one 8-hour day.

As an engineer responsible for monitoring works in the area of ​​mechanical systems, you must evaluate the following situation: a large client in the retail area has a refrigeration system where it stores some chilled or frozen products to be sold on the sales floor.Recently, the customer's maintenance department has been questioning the system's performance and requested an evaluation of the system's behavior. You went to the location and requested some information from the maintenance manager about the system, who provided the following data: - The system operates with R-134a refrigerant;- The refrigerated environment is maintained at 0°C and the external environment at 26°C;- The refrigerant flow rate in the system is 0.08 kg/s; In addition to the data provided, you carried out some tests and measured the temperature of the refrigerant fluid at some specific points in the system, such as the compressor inlet and condenser outlet, finding values ​​of 0°C and 26°C respectively.…

As an engineer responsible for monitoring works in the area of ​​mechanical systems, you must evaluate the following situation: a large client in the retail area has a refrigeration system where it stores some chilled or frozen products to be sold on the sales floor.Recently, the customer's maintenance department has been questioning the system's performance and requested an evaluation of the system's behavior. You went to the location and requested some information from the maintenance manager about the system, who provided the following data: - The system operates with R-134a refrigerant;- The refrigerated environment is maintained at 0°C and the external environment at 26°C;- The refrigerant flow rate in the system is 0.08 kg/s; In addition to the data provided, you carried out some tests and measured the temperature of the refrigerant fluid at some specific points in the system, such as the compressor inlet and condenser outlet, finding values ​​of 0°C and 26°C respectively.…

Can someone please help me to answer all of the following questions thank you!!

Chapter 12 - Lecture Notes.pptx: (MAE 272-01) (SP25) DY... Scores

Develop the activity sequence model and determine the normal time for the following work activity:

A. A student establishes the time constant of a temperature sensor by first holding it immersed in hot water and then suddenly removing it and holding it immersed in cold water. Several other students perform the same test with similar sensors. Overall, their results are inconsistent, with estimated time constants differing by as much as a factor of 1.2. Offer suggestions about why this might happen. Hint: Try this yourself and think about control of test conditions. B. Which would you expect to be better suited to measure a time-dependent temperature, a thermal sensor (e.g., a thermocouple) having a small diameter spherical bead or one having a large diameter spherical bead? Why?

Help!!! Please solve the value

Subject: Mechanical Measurements Do not copy other online answers

Which of the following distinguishes why farm account for so many injuries of children in the workplace

Help!!! Answer all correctly with accurately. On the Part A. FBD make sure you Td , Tc, Ta values. Solve only Part A.

Hartley Electronics, Inc., in Nashville, producesshort runs of custom airwave scanners for the defense industry.The owner, Janet Hartley, has asked you to reduce inventory byintroducing a kanban system. After several hours of analysis, youdevelop the following data for scanner connectors used in onework cell. How many kanbans do you need for this connector?Daily demand 1,000 connectorsLead time 2 daysSafety stock 12 dayKanban size 500 connectors

Sensor systems for obstacle detection and avoidance in mobile robots. • Produce a written report documenting: the choice of sensors, sensor evaluation, the developed processor/measurement system, and overall system performance.

PART D