Concept explainers
The demand for electric power is usually much higher during the day than it is at night, and utility companies often sell power at night at much lower prices to encourage consumers to use the available power generation capacity and to avoid building new, expensive power plants that will be used only a short time during peak periods. Utilities are also willing to purchase power produced during the day from private parties at a high price.
Suppose a utility company is selling electric power for $0.05/kWh at night and is willing to pay $0.12/kWh for power produced during the day. To take advantage of this opportunity, an entrepreneur is considering building a large reservoir 40 m above the lake level, pumping water from the lake to the reservoir at night using cheap power, and letting the water flow from the reservoir back to the lake during the day, producing power as the pump–motor operates as a turbine–generator during reverse flow. Preliminary analysis shows that a water flow rate of 2 m3/s can be used in either direction. The combined pump–motor and turbine–generator efficiencies are expected to be 75 percent each. Disregarding the frictional losses in piping and assuming the system operates for 10 h each in the pump and turbine modes during a typical day, determine the potential revenue this pump–turbine system can generate per year.
FIGURE P2–122
The potential revenue generated per year for the system.
Answer to Problem 122RP
The potential revenue generated per year for the system is
Explanation of Solution
Calculate the minimum power required to pump water from the lower reservoir to the higher reservoir.
Here, the maximum power of turbine is
Calculate the actual pump electric power.
Here, the efficiency of combined pump-motor is
Calculate the turbine electric power.
Here, the efficiency of combined turbine-geneator is
Calculate the power consumption cost of the pump.
Here, change in time of each in the pump and turbine modes during a typical day is
Calculate the revenue generated by the turbine.
Calculate the net income per year.
Conclusion:
Substitute
Substitute 784.8 kW for
Substitute 784.8 kW for
Substitute 1046 kW for
Substitute 588.6 kW for
Substitute
Thus, the potential revenue generated per year for the system is
Want to see more full solutions like this?
Chapter 2 Solutions
THERMODYNAMICS: ENG APPROACH LOOSELEAF
Additional Engineering Textbook Solutions
Introduction to Heat Transfer
Degarmo's Materials And Processes In Manufacturing
Machine Tool Practices (10th Edition)
Thinking Like an Engineer: An Active Learning Approach (4th Edition)
Fluid Mechanics Fundamentals And Applications
Manufacturing Engineering & Technology
- If a house needs a minimum heat transfer rate of 75 kJ/h (i.e., 75 kJ of heat needs to be transferred into the house during one hour) to maintain a pleasant indoor temperature. If one wants to use a heat pump with a COP of 5.55 to fulfill this heat transfer rate, what is the corresponding electricity (in kWh) consumption to run such a heat pump for one hour?arrow_forwardA power plant with a nominal rating of 1kW does not actually produce 1kW continuously because its capacity factor C - the fraction of the time that it is actually running at its rated power - is less than 100%. If the capacity factor C = 35%, how much energy will be generated by this power plant over 1 year in MJ?arrow_forwardA regional electric utility company has a power plant with 1000 MW of electricity. The overall thermal efficiency of the power plant is 25%. The fuel used in the plant is an oil with a heating value of 5.00 ´106 kJ/kg and costs PHP 3.75 per liter. The density of the oil is 0.90 kg/L. Determine: (a) the daily fuel requirement (kg) when the plant runs at maximum capacity.(b) the daily fuel cost (PHP) of running the plant at maximum capacity.There are two answers: one for (a), one for (b).arrow_forward
- An inventor claims to have a solar powered heat pump that receives energy as heat from the sun at the rate of 10 kW and extracts energy as heat from the environment at the rate of 7 kW. This system does not require any shaft or electrical power input. If you think this device is impossible, explain why using basic principles to support your argument. If you think it might be possible, what would be the steady-state rate of transfer of energy as heat to the house? (Assume TH = 20 Cand TL = -15 C).arrow_forwardIf the energy crossing the boundary of a closed system is not heat, it must be work?arrow_forwardBased on thermodynamics of a process, explain intermediary energy. Mention the three characteristic features of this intermediary energyarrow_forward
- A heat pump with a coefficient of performance of 3.5 provides energy at an average rate of 70000 kJ/h to maintain a building at 20 °C on a day when the outside temperature is -5 °C. If the electricity costs 8.5 cents per kWh. Assume heating is 24 hours a day. (1) Determine the actual operating cost in $/day. (2) Determine the minimum theoretical operating cost in $/day.arrow_forwardFor a refrigerator with automatic defrost and a top-mounted freezer, the electric power required is approximately 450 watts to operate. If the coefficient of performance is 3.2, Evaluating electricity at $0.15/kW⋅h, and assuming the unit runs 75% of the time, estimate the cost of one month's operation, in $.arrow_forwardSolar energy stored in large bodies of water, called solar ponds, is being used to generate electricity. If such a solar power plant has an efficiency of 3 percent and a net power output of 150 kW, determine the average value of the required solar energy collection rate, in Btu/h.arrow_forward
- A homeowner is trying to decide between a highefficiency natural gas furnace with an efficiency of 97 percent and a ground-source heat pump with a COP of 3.5. The unit costs of electricity and natural gas are $0.115/kWh and $0.75/therm (1 therm = 105,500 kJ). Determine which system will have a lower energy cost.arrow_forwardA device collects energy from the sun's rays and produces a high temperature of 95 °C. A small heat engine then uses this as a high temperature reservoir and operates at an ambient temperature of 15 °C. What is the maximum possible thermal efficiency of this heat engine? After some improvements are made to the solar energy collector, the high temperature it produces is now Tnew. If it is given that the new maximum possible thermal efficiency of the heat engine is double the previous one, what is Tnew? (Assume that the ambient temperature stays the same)arrow_forwardgive a specific example of a process that has the energy changes and transfers described. (For example, if the question states “ΔEth > 0, W = 0,” you are to describe a process that has an increase in thermal energy and no transfer of energy by work. You could write “Heating a pan of water on the stove.”) ΔEth < 0, W ≠ 0, Q ≠ 0arrow_forward
- Refrigeration and Air Conditioning Technology (Mi...Mechanical EngineeringISBN:9781305578296Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill JohnsonPublisher:Cengage Learning