Two rods vertically connect beams AB and CD as shown in the figure. Point A is fixed supported while point D is hinged connected. If the rod on the right is heated by 18 degree Celsius,2 m2 m2 mCUse E = 200 GPa, linear of coefficient expansion = 11.7 x 10° per degree celsius and A = 4500 mm².Compute for the deformation of the right rod in mm.Select the correct response:0.0234 mm0.0842 mm0.0468 mm0.117 mm

Answered: Image /qna-images/answer/27cf0188-e2a5-4a17-bc10-bd7296c7cdbf.jpg

Two rods vertically connect beams AB and CD as shown in the figure. Point A is fixed supported while point D is hinged connected. If the rod on the right is heated by 18 degree Celsius, E2 m- 2 m A 2 m C Use E = 200 GPa, linear of coefficient expansion = 11.7 x 106 per degree celsius and A = 4500 mm². Compute for the deformation of the right rod in mm. Select the correct response: 0.0234 mm 0,0842 mm 0.0468 mm 0.117 mm

Two rods vertically connect beams AB and CD as shown in the figure. Point A is fixed supported while point D is hinged connected. If the rod on the right is heated by 18 degree Celsius, E2 m- 2 m A 2 m C Use E = 200 GPa, linear of coefficient expansion = 11.7 x 106 per degree celsius and A = 4500 mm². Compute for the deformation of the right rod in mm. Select the correct response: 0.0234 mm 0,0842 mm 0.0468 mm 0.117 mm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

What torque is applied to the end of the shaft in the figure, resulting in a 3 degree rotation? The shear elastic modulus of steel is G = 80GPa.
The uniform forces U and P are applied to a plate with dimensions of 500mm x 400mm and a thickness of 10 mm as illustrated. Consider the linear elastic behavior, 200GPa Young's modulus, and 78GPa shear modulus. The plate is subjected to a uniform force U with an undetermined magnitude and direction and a uniform tensile force P=50KN. X 500 mm 400 mm A. What is force U, in kN, if deformation along y is zero? Is it a compressive or tensile force? B. What is the x-axis deformation, in mm? Is the dimension growing or shrinking?
Solve the problem below and show your complete, systematic and neat solution with explanation.
The beam shown below is suspended from two steel rods as shown and is initially horizontal. The midpoint B of the beam is deflected 15 mm downward by force Q. The steel used for the rods has properties E = 200 GPa and σ = 275 MPa, determinea. the required maximum value of Q.b. the deformation of rod AD.c. the deformation of rod CE.
Below presents a continuous beam with A being fixed and B is pinned and C has a roller. Take: E = 200 GPa 1 = 8 x 106mm Load = 2 kN A 5m B Using the following method: 2 KN + 2m + 2m |- You are tasked to analyze the continuous beam by calculating the: > the displacement on the beam at B and C and > the reaction at the supports Matrix Structural Analysis Use the following steps as a guide to analyze the beam: Matrix Structural Analysis ✓ Produce Notations ✓ Establish the known displacements and known external load ✓ Produce Member Stiffness Matrix ✓ Displacement and Load ✓ Calculating the displacement Calculating the reaction at the support
The figure shows a beam made from a material having an allowable tensile stress of 135 MPa and a compressive stress of 165 MPa. The couple M is applied to the beam in a plane forming an angle of 45° as shown in the figure. a) Determine the location of the centroid of the cross section b) Calculate the moments of inertia about the principal axes, I, and ly c) Determine the maximum allowable internal moment M that can be applied to the beam N M Y 140 mm 140 mm 45⁰ 140 mm 280 mm 140 mm 140 mm
The steel plate shown below is put in into a rigid chamber, such that spacings of size s = 0.003 m. To fit the plate, it is heated. It can be assumed that the plate can move frictionless along its edges. If x = 4 m and y = 2 m, E = 200 GPa !! V = 0.28 = 11.7 x 10 FC Which temperature increase along the x-axis is required to just close the spacing on the right in degree celcius? Select the correct response 85.470 O 64.103 040.171 32.051
The lower ends of the three bars in the figure are the same level before the rigid homogeneous W=100 kN block is attached. The properties of the bars are shown in the table. The temperature of the bars is then increased by 80°C. The block is assumed to remain horizontal after all deformations have occured. a.) Which of the following most nearly gives the temperature rise to cause all of the applied loads to be supported by the steel rods? b.) Which of the following most nearly gives the stress developed in the bronze bar? c.) Which of the following most nearly gives the stress developed in the steel bar? 下上F Bronze Length, L Area, A Modulus elasticity, E Coefficient of 11.7x10C linear Steel 1.00 m 500m2 of 200 GPa 1.60 m 900 m 83 GPa Bronze Steel Steel 18x104 C A B expansion, a
None
Computation must be completeAnswer in two decimal placesBox your final answer
The plate has a thickness of 20 mm and the force P = 5 kN acts along the centerline of this thickness such that d = 150 mm. (Figure 1) Figure d‡ 200 mm a 1 of 1
Situation 10: The rigid bar ABC as shown in the figure is pinned supported at B and attached to the vertical two rods. Initially, the bar is horizontal and the vertical rods are stress-free. The temperature in the steel rod is decreased by 40°C. Neglect the weight of the bar Steel L = 910 mm A = 300 mm² E = 200 GPa a = 11.7 x 106/C AT = -45°C 0.5 m + 1.3 m Aluminum L = 1320 mm A 1200 mm² E = 70 GPa a = 23 x 106/C 27. Determine the stress in the aluminum rod 28. Determine the stress in the steel rod 29. Determine the deflection at the point where aluminum rod and bar is attach