Taper turning is performed on a mild steel specimen, using the given data determine thefollowing.of() Large diameter of the taper is 31.5 mm(ii) Spindle speed is 190 rpm, feed is 0.2 mm/rev & Depth of cut is 0.5 mmtion(ii) 1.5 minutes and 17.7 minutes are respective time required to complete one single taperturning operation and total time required to complete the taper turning operationFind (a) Cutting speed in m/minutes - (*(b) Taper Length in mm - (1(c) Taper angle in degree

In machining, taper turning is a process in which the diameter of cylindrical workpieces reduces…

Taper turning is performed on a mild steel specimen, using the given data determine the following. (1) Large diameter of the taper is 31.5 mm (ii) Spindle speed is 190 rpm, feed is 0.2 mm/rev & Depth of cut is 0.5 mm (iii) 1.5 minutes and 17.7 minutes are respective time required to complete one single taper turning operation and total time required to complete the taper turning operation Find (a) Cutting speed in m/minutes - (* (b) Taper Length in mm - (1 (c) Taper angle in degree

Taper turning is performed on a mild steel specimen, using the given data determine the following. (1) Large diameter of the taper is 31.5 mm (ii) Spindle speed is 190 rpm, feed is 0.2 mm/rev & Depth of cut is 0.5 mm (iii) 1.5 minutes and 17.7 minutes are respective time required to complete one single taper turning operation and total time required to complete the taper turning operation Find (a) Cutting speed in m/minutes - (* (b) Taper Length in mm - (1 (c) Taper angle in degree

Precision Machining Technology (MindTap Course List)

2nd Edition

ISBN:9781285444543

Author:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Publisher:Peter J. Hoffman, Eric S. Hopewell, Brian Janes

Chapter5: Turning

Section5.5: Taper Turning

Problem 8RQ: What must be known to use the compound-rest taper turning method?

See similar textbooks

Related questions

Q: A number of through holes with 10-mm-diameter have been drilled through 30-mm thick cast iron plate.…

Q: A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 47 mm for an…

Q: What is the cutting speed of turning in the unit of m/min, when main axis spindle speed is 2,409 rpm…

A: Given Data N=2409 rpm D=86 mm

Q: 45) Find the RPM for turning a 1 1/4 inch shaft on a lathe with the material having a cutting speed…

Q: a.) In a drilling operation, 3 blind holes needs to be drilled to a depth of 16 mm and a diameter of…

A: Note: As per Bartlebyanswering guidelines in case of multiple questions, only one question needs to…

Q: Q24. For the below figure please write its part program. The depth of the cut is 0.25 inches…

Q: A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 49 mm for an…

A: there are 4 subparts posted above.As per honor code and answering guidelines I can answer 1st three…

Q: in shaft turning Steel raw material, diameter 40 mm., length 200 mm. to obtain a lathe workpiece…

A: Given, D1 = 40 mm L1 = 200 mm D2 = 35 mm L2 = 150 mm Cutting Speed, S = 25 m/min feed rate, f = 0.2…

Q: ne area of 5,700m2, with its longitudinal centre mine the new draughts forward and aft if a wei, d…

A: according to questiond2 ∂2udx2=∂2∂t2,0<x<L,t>0since the string is of limited length and it…

Q: E50→ 30 rad. 125 75 10 dia., 2 holes 25 35 deg. 25 75- 150

A: Part program code is as follows:

Q: The surface finish specification in a turning job is 0.90 um. The work material is cast iron. The…

Q: Q1. Calculate the time required to machine a workpiece 170 mm long, 60 mm diameter to 165 mm long 50…

A: Here are the values given in the question: Gray cast iron surface width: 280mm Gray cast iron…

Q: A cylindrical mild steel work piece of Ø55 X 200mm undergoes a turning operation on a lathe machine…

A: Given data Diameter of work piece = 55 mmLength of work piece = 200 mmFinal diameter = 45 mmCutting…

Q: A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 47 mm for an…

A: for solution refer below images.

Q: Find the machining time to complete the job as shown below from the basic raw material of 50 mm…

A: Given: L = 100 mm Di = 50 mm Vt = 25 m/min Vd = 20 m/min f (for turning and boring) = 0.5 mm/rev f…

Q: A mild steel specimen of Initial diameter of 32.5 mm is turned to final diameter of 25 mm for an…

A: there are 4 subparts posted in 1 question, as per honor code and answering guidelines I can answer…

Q: A mild steel specimen of Initial diameter of 30.5 mm is turned to final diameter of 27 mm for an…

A: Turing is a material removal operation in which the diameter of the workpiece is reduced. It…

Q: 1. If a machinist wanted to drill a % inch hole in a piece of machine steel using a high speed steel…

A: Solution: Note: Dear Student! As per our guidelines, we are only allowed to answer three questions.…

Q: Determine the spindle speed (rpm), the feed rate (in/min) and the cutting power required for turning…

A: As two questions are independent so I am answering Q.5 as per bartleby policy. Please post Q.6…

Q: On a lathe, a cylindrical work piece of 100mm diameter is being turned. The RPM is 100. The lenght…

Q: Note: All dimensions are in mm A 34 mm diameter x 120 mm shafting will be turned using a lathe to…

A: given: Diameter of the shaft→Di=34 mm Total length of the shaft→Li=120 mm machinable length of…

Q: 4. The drilling speed for cast iron is assumed to be 70 ft/min. Find the time required to drill two…

Q: In a shaper machine, the crank rotates at constant speed of 130 r.p.m. The angle travelled by the…

A: Given that : A shaper machine Crank rotating at speed (N) = 130 rpm…

Q: 2) In an orthogonal cutting operation, the cutting tool has a rake angle = 20°. The chip thickness…

Q: (1) A twist drill bit is used to drill a hole of diameter 2.0 at 4578.1 rpm at a feed rate of 2.5…

Q: The 200-mm-radius disk rolls without sliding on the surface shown. Knowing that the distance BG is…

Q: The end of a large tubular workpart is to be faced on a NC vertical boring mill. The part has an…

Q: A mild steel specimen of Initial diameter of 51.5 mm is turned to final diameter of 48 mm for an…

A: here 4 subparts were posted, As per honor code and answering guidelines I can answer firs 3…

Q: (a)Find number of passes to finish the entire turning operation (b) Total time required to complete…

A: for solution refer below images.

Q: the rod to 16 mm and also facing operation on both sides is done. Assume cutting speed is 30 m/min…

A: Given, L = 120 mm d = 35 mm V = 30 m/min f = 0.7 mm/rev

Q: Calculate the taper angle if the major diameter is 48.00mm and minor diameter is 28.00. The length…

Q: Q2 -Calculate the taper angle if the major diameter is 40.00mm and minor diameter is 28.00. The…

Concept explainers

Machining Processes and Machine Tools

Machining is represented as the process in which an excessive amount of substance is eliminated from the particular element in the form of pieces. In machining, cutting tools such as rotary tools, lathe, drill press, grinder, chop saw, welders, and many more are applied to get the desired shape. As compared to other manufacturing processes, machining is precise and versatile.

Question

Taper turning is performed on a mild steel specimen, using the given data determine the
following.
of
() Large diameter of the taper is 31.5 mm
(ii) Spindle speed is 190 rpm, feed is 0.2 mm/rev & Depth of cut is 0.5 mm
tion
(ii) 1.5 minutes and 17.7 minutes are respective time required to complete one single taper
turning operation and total time required to complete the taper turning operation
Find (a) Cutting speed in m/minutes - (*
(b) Taper Length in mm - (1
(c) Taper angle in degree

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step 5

Step by step

Solved in 5 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 47 mm for an initial length of 154 mm on a lathe machine. Using the given data find the following. (i) Feed of 0.4 mm/rev & Depth of cut is 0.5 mm (ii) During machining the tool's approach length is 5 mm, over run length is 2mm (iii) Total time required to complete the turning operation is 59.6 minutes
A mild steel specimen of Initial diameter of 53.5 mm is turned to final diameter of 47 mm for an initial length of 154 mm on a lathe machine. Using the given data find the following. (i) Feed of 0.4 mm/rev & Depth of cut is 0.5 mm (ii) During machining the tool's approach length is 5 mm, over run length is 2mm (iii) Total time required to complete the turning operation is 59.6 minutes (a) Find number of passes to finish the entire turning operation ( (b) The actual length of the turning operation in mm ('
A mild steel specimen of Initial diameter of 51.5 mm is turned to final diameter of 48 mm for an initial length of 151 mm on a lathe machine. Using the given data find the following. (i) Feed of 0.1 mm/rev & Depth of cut is 0.5 mm (ii) During machining the tool's approach length is 7 mm, over run length is 2mm (iii) Total time required to complete the turning operation is 48.8 minutes (a) Find number of passes to finish the entire turning operation (b) The actual length of the turning operation in mm ( (c)The time required to complete one single turning operation in minutes (d) Spindle speed in rpm
A mild steel specimen of Initial diameter of 32.5 mm is turned to final diameter of 25 mm for an initial length of 154 mm on a lathe machine. Using the given data find the following. (i) Feed of 0.3 mm/rev & Depth of cut is 0.5 mm (ii)During machining the tool's approach length is 6 mm, over run length is 3mm (iii) Time required to complete one single turning operation is 2.3 minutes (a)Find number of passes to finish the entire turning operation (b) Total time required to complete the turning operation in minutes (c) Spindle speed in in rpm (d) Cutting speed in m/minutes
A mild steel specimen of Initial diameter of 30.5 mm is turned to final diameter of 27 mm for an initial length of 153 mm on a lathe machine. Using the given data find the following. (i) Feed of 0.4 mm/rev & Depth of cut is 0.5 mm (ii)During machining the tool's approach length is 5 mm, over run length is 2mm (iii) Time required to complete one single turning operation is 3.5 minutes (a)Find number of passes to finish the entire turning operation (b) Total time required to complete the turning operation in minutes
A mild steel specimen of Initial diameter of 30.5 mm is turned to final diameter of 27 mm for an initial length of 153 mm on a lathe machine. Using the given data find the following. (i) Feed of 0.4 mm/rev & Depth of cut is 0.5 mm (ii)During machining the tool's approach length is 5 mm, over run length is 2mm (iii) Time required to complete one single turning operation is 3.5 minutes (c) Spindle speed in in rpm (= (d) Cutting speed in m/minutes(=
The end of a large tubular workpart is to be faced on a NC vertical boring mill. The part has an outside diameter of 38.0 in and an inside diameter of 24.0 in. If the facing operation is performed at a rotational speed of 40.0 rev/min, feed of 0.015 in/rev, and depth of cut of 0.180 in, determine (a) the cutting time to complete the facing operation and the cutting speeds and metal removal rates at the beginning and end of the cut.
QUESTION 5 Determine the spindle speed (rpm), the feed rate (in/min) and the cutting power required for turning a 1º diameter copper rod with a depth of cut of 0.1" using a cemented carbide tool. O N=287 RPM, F-25.8 in/min, P=9.7 hp ON=2866 RPM, F=258 in/min, P=97 hp ON=1146 RPM, F-25.8 in/min, P=97 hp O N= 11460 RPM, F-340 in/min, P=130 hp ON= 1146 RPM, F-34 inimin, P= 13 hp ON= 115 RPM, F-3.4 in/min, P=1.3 hp QUESTION 6 It is required to face mill an aluminum block to size it down from 2" to 1.5" thick using a 3" diameter 2-toothed carbide cutting tool. The block is 6.0" wide and 6" long. The entire tool diameter engages the workpiece during the cut. Calculate the recommended spindle speed in revolutions per minute, feed per tooth, and cutting power required. O N=1529 RPM, f= 0.026 in/rev/tooth, P = 36 hp O N-3820 RPM, f= 26 in/revitooth, P=27 hp O N-3820 RPM, f= 0.052 in/rew/tooth, P=27 hp ON-382 RPM, F= 0.026 in/revitooth, P = 0.027 hp O N-3820 RPM, f= 0.052 in/rev/tooth, P=2.7 hp…
The surface finish specification in a turning job is 0.90 um. The work material is cast iron. The cutting conditions have been selected as follows: v =90 m/min, f -0.23 mm/rev, and d = 2.2 mm. The nose radius of the cutting tool must be selected. Determine the minimum nose radius that will obtain the specified finish in this operation. oichie 0 90. m The wok matedal i material is
Solve it quickly please
Solve it quickly please
Q1. Calculate the time required to machine a workpiece 170 mm long, 60 mm diameter to 165 mm long 50 mm diameter. The workpiece rotates at 440 rpm, feed is 0.3 mm/rev and maximum depth of cut is 2 mm. Assume total approach and overtravel distance as 5 mm for turning operation. Answer Q2. A gray cast iron surface 280 wide and 540mm long may be machined either on a vertical milling machine, using a 100mm - diameter face mill having eight inserted HSS teeth, or on a horizontal milling machine using an HSS slab mill with eight teeth on a 200-mm. diameter. Which machine has the faster cutting time? The values of feed per tooth and cutting speed for both processes are 0.4mm/tooth and 80m/min, respectively. The depth of cut = 3.0 mm and assume A and O equal to 5. Answer