Required information Air is to be heated by passing it over a bank of 3-m-long tubes inside which steam is condensing at 100°C. Air approaches the tube bank in the normal direction at 20°C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 1.6 cm, and the tubes are arranged in-line with longitudinal and transverse pitches of SL = ST= 6 cm. There are 20 rows in the flow direction with 10 tubes in each row. Assume the air properties at mean temperature of 35°C and 1 atm. The air properties at the assumed mean temperature of 35°C and 1 atm are k= 0.02625 W/m-K, p = 1.145 kg/m³, cp= 1.007 kJ/kg-K, Pr = 0.7268, µ = 1.895 × 10¬5 kg/m-s, Prs = Pr@ Ts = 100°C = 0.7111. Determine the rate of condensation of steam inside the tubes. The rate of condensation of steam inside the tubes is | kg/min.

Required information Air is to be heated by passing it over a bank of 3-m-long tubes inside which steam is condensing at 100°C. Air approaches the tube bank in the normal direction at 20°C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 1.6 cm, and the tubes are arranged in-line with longitudinal and transverse pitches of SL = ST= 6 cm. There are 20 rows in the flow direction with 10 tubes in each row. Assume the air properties at mean temperature of 35°C and 1 atm. The air properties at the assumed mean temperature of 35°C and 1 atm are k= 0.02625 W/m-K, p = 1.145 kg/m³, cp= 1.007 kJ/kg-K, Pr = 0.7268, µ = 1.895 × 10¬5 kg/m-s, Prs = Pr@ Ts = 100°C = 0.7111. Determine the rate of condensation of steam inside the tubes. The rate of condensation of steam inside the tubes is | kg/min.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: a) 6-m-long

Q: B A6-mm-diameter electrical transmission line carries an electric current of 50 A and has a…

Q: Air at 20 °C flows with a velocity of 10 m/s along a 4 m flat plate which is maintained at uniform…

Q: Air at 1 atm and 27°C flows across a bank of tubes: 10 rows high and 1 row deep at a velocity of 10…

Q: Calculate the total thermal resistance between hot water and the surrounding ambient air for the…

A: Write the given data. L=10 mvair=0.6 m/svwater=0.05 m/shw=118 W/m2KTb=50 °Cki=0.5 W/mKkc=18…

Q: Air with free stream temperature of 10 C is flowing over a flat plate (1.5m long and Im wide). The…

Q: Find out the local convection coefficient for a flow over a flat plate at a distance of 0.2 m from…

A: As per the company policy, we are restricted to solve only one question at a time. Thanks for…

Q: Question 1 The compressed air at 150 kPa is used in the cooling process of a hot flat plate. The…

Q: Water at 15.6 °C flows across a 20- cm-square plate with a velocity of 2 m/s. A thin strip, 5 mm…

A: This question is solved with the help of the law of convection. It states that heat transfer by…

Q: Compute the Nu numbers for air at 40°C flowing with 4 m/s speed over the following: 1) A Copper…

A: Given: The temperature of air, T = 40 C The air speed, v = 4 m/s The surface temperature, Ts = 80ᵒC…

Q: ttempt please

A: Given-Information:- Vair craft = 120 m/sTair = -8°CTwing = 8°CLc = 2.1 mcf = 0.002h = 12,000 ftp =…

Q: A transformer is to be cooled via forced air convection. To increase the effectiveness of the…

Q: For laminar flow over a hot flat plate, the local heat transfer coefficient decreases with distance…

A: Given question: For laminar flow over a hot flat plate, the local heat transfer coefficient…

Q: An object of characteristic length Z = 0.5 m is 10°C warmer than the surrounding fluid, which is…

A: 1. Reynolds number:Write expression for Reynolds number. ...... (1)Here V is fluid…

Q: Find out the local convection coefficient for a flow over a flat plate at a distance of 0.2 m from…

A: The distance is The water temperature is The water velocity is The film temperature is

Q: An object of characteristic length Z = 0.5 m is 10°C warmer than the surrounding fluid, which is…

A: 1. Reynolds number:Write expression for Reynolds number. ...... (1)Here V is fluid…

Q: A long and wide heated plate is maintained at uniform temperature. You have to calculate the average…

Q: Determine the maximum allowable uniform heat flux, in W/m², that may be imposed at a wall heating…

A: To Find : The maximum allowable uniform heat flux Given : The ambient temperature is TThe maximum…

Q: Required information Hot gas flows in parallel over the upper surface of a 2-m-long plate. The…

A: (u_L) is the velocity of the gas (17 m/s).(L) is the length of the plate (2 m).(\nu) is the…

Q: Calculate the heat transfer from a 60 cm x 60 cm plate on which air flows at 40 C and. The plate…

Q: For seaworthiness trial of a new ocean-going vessel design, the total convective heat transfer rate…

Q: Exhaust gases at 1 atm and 300°C are used to preheat water in an industrial facility by passing them…

Q: ! Required information Air flows in a pipe under fully developed conditions with an average velocity…

A: To find: The wall temperature at the exit. Given: The average velocity of the air is vavg=1.25 m/s.…

Q: A flat plate of width 1 m and length 0.22 m is maintained at a temperature of 32°C. Ambient fluid at…

Question

Required information
Air is to be heated by passing it over a bank of 3-m-long tubes inside which steam is condensing at 100°C. Air approaches
the tube bank in the normal direction at 20°C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is
1.6 cm, and the tubes are arranged in-line with longitudinal and transverse pitches of SL = ST= 6 cm. There are 20 rows in
the flow direction with 10 tubes in each row. Assume the air properties at mean temperature of 35°C and 1 atm. The air
properties at the assumed mean temperature of 35°C and 1 atm are k= 0.02625 W/m-K, p = 1.145 kg/m3, co= 1.007
kJ/kg-K, Pr = 0.7268, µ = 1.895 × 10¬º kg/m-s, Prs = Pr@ Ts = 100°C = 0.7111.
Determine the rate of condensation of steam inside the tubes.
The rate of condensation of steam inside the tubes is
kg/min.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A steel plate has dimensions of 3 m by 1 m and is initially kept at a temperature of 30 degree Celsius. It is cooled by blowing air parallel to the 1 m edge at 9 km/hr. The temperature of the flowing air is maintained at 10 degree Celsius. Estimate the convection heat transfer rate from both sides of the plate.
The answer options have been included
! Required information Air flows in a pipe under fully developed conditions with an average velocity of 1.25 m/s and a temperature of 24°C. The pipe's inner diameter is 4 cm, and its length is 4 m. The first half of the pipe is kept at a constant wall temperature of 100°C. The second half of the pipe is subjected to a constant heat flux of 200 W. The properties of air at 80°C are p = 0.9994 kg/m³, k = 0.02953 W/m-K, v= 2.097 x 10-5 m²/s, cp=1008 J/kg-K, and Pr = 0.7154. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Air 1.25 m/s 2m T, = 100°C D = 4 cm 2 m Q₁ = 200 W a) Determine the air temperature at the 2 m length. The air temperature at the 2 m length is b) Determine the air temperature at the exit. The air temperature at the exit is °C. c) Determine the total heat transfer to the air. The total heat transfer to the air is W.
Calculate the convective heat transfer rate via the top and the two side walls of a refrigerated box trailer as shown in the figure. The trailer is cruising at a rate of 70 mph (31.3 m/s). The box trailer dimensions are 16 m long, 4.1 m high, and 2.6 m wide. Assume that the surface of the trailer is at uniform temperature of 10°C. The air temperature is 30°C. Because of the presence of the prime-mover in the front, the air flow can be assumed to be turbulent when it encounters the trailer. 187.4 kW Walls. Prime-mover 16 m 2.6 m
Air stream at 1 atm flows with a velocity of 2 m/s, in parallel over a 3 m long square flat plate, placed on ground, where there is an unheated starting length of 1 m. The air stream has a temperature of 20 °C and the heated section of the flat plate is maintained at a constant temperature of 80 °C. Determine the local heat transfer coefficient at trailing edge and average convection heat transfer coefficient for the heated section. Also calculate the heat loss by convection. Determine the average friction coefficient and wall shear stress and drag force.
Air is flowing at 35°F with a velocity of 12 ft/s over a plate 10 ft long and 2 ft wide. The plate is at room temperature. Determine the coefficients of local friction, heat transfer coefficient and heat transfer rate of the plate at 1 ft intervals along the length. Plot on the same graph the results as a function of distance from the leading edge, the graph will be reviewed. The table of thermal properties of air is on the platform. Report in the following boxes your results for a length of 5 ft.
Air at 10°C and 1 atm is flowing parallel at a velocity of 15.5 m/s over the top flat surface of copper plate. The top surface of the copper plate is 0.03m by 0.03m square. The temperature of copper plate is uniform at 65.6°C. For laminar flow, calculate the dimensionless Reymolds number (Nre) and Nussel number (NNu). Table A.3-3a. Physical Properties of Air at 101.325 kPa (1 Atm Abs), SI Units Bx (Bp²/1?) T (kJ/kg · u x T (Pa ·s, k (W/m 103 (1/K • (°C) T (K) (kg/m³) K) -17.8255.41.379 1.0048 1.62 × 6s or kg/m · s) · K) Npr (1/K) m³) 0.022500.7203.92 2.79 x 108 O 273.21.293 1.0048 1.72 × (0-5 0.024230.7153.65 2.04 × 108 10.0 283.21.246 1.0048 1.78 ×/0 0.024920.7133.53 1.72 x 108 37.8 311.01.137 1.0048 1.90%/0-S 0.027000.7053.22 1.12 x 108 Select one: O A. NRe = 27826.58; NNu =98.58 O B. NRe = 23215.74; NNu =152.68 O C. NRe = 27826.58; NNu = 152.68 O D. NRe = 23215.74; NNu =98.58
Heat transfer
Hot water is flowing though the center of a AISI 304 stainless steel pipe with a diameter of 300mm, a wall thickness of 10mm and a length of 5m. The pipe is coated with a 2.5mm thick layer of Teflon and covered with a 30mm thick layer of insulation. The water is flowing at a velocity of 0.0015 m/s. Assume the velocity profile to be fully developed. The water is at a temperature of 92°C and the air surrounding the pipe is at 22°C. Some transport properties and dimensions are shown in the table below. 1. What is the heat transfer rate through the pipe and insulation? 2. What is the heat flux at the inner pipe surface and the outer surface of the insulation? 3. What is the temperature of the outer surface of the insulation? Insulation Pipe Too water Uwater Teflon Tm air hair Pipe inner diameter: 300mm Pipe wall thickness: 10mm Teflon Layer thickness: 2.5mm Insulation thickness: 30mm Length: 5m To, water: 92°C Lair: 22°C hair: 75 W/m2/K k30455: 15.2 W/m/K kTeflon: 0.38 W/m/K kinsulation:…
Laminar flow normally persists on a smooth flat plate until a critical Reynolds number value is reached. However, the flow can be tripped to a turbulent state by adding roughness to the leading edge of the plate. For a particular situation, experimental results show that the local heat transfer coefficients for laminar and turbulent conditions are hlam (x) = Alamæª htur (x) - Aturæb Alam = 1.98 a = -0.5 Atur = 4.15 b = -0.3 Calculate the average heat transfer coefficients for laminar and turbulent conditions for plates of length L = 0.2 m and 2.5 m.