!Required informationAir flows in a pipe under fully developed conditions with an average velocity of 1.25 m/s and a temperature of 24°C. Thepipe's inner diameter is 4 cm, and its length is 4 m. The first half of the pipe is kept at a constant wall temperature of 100°C.The second half of the pipe is subjected to a constant heat flux of 200 W. The properties of air at 80°C are p = 0.9994kg/m³, k = 0.02953 W/m-K, v= 2.097 x 10-5 m²/s, cp=1008 J/kg-K, and Pr = 0.7154.NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part.Air1.25 m/s2mT, = 100°CD = 4 cm2 mQ₁ = 200 Wa) Determine the air temperature at the 2 m length.The air temperature at the 2 m length isb) Determine the air temperature at the exit.The air temperature at the exit is°C.c) Determine the total heat transfer to the air.The total heat transfer to the air isW.

Answered: Image /qna-images/answer/d02b21bd-3107-4cc3-b277-56cfc97d6256.jpg

Required information Air flows in a pipe under fully developed conditions with an average velocity of 1.25 m/s and a temperature of 24°C. The pipe's inner diameter is 4 cm, and its length is 4 m. The first half of the pipe is kept at a constant wall temperature of 100°C. The second half of the pipe is subjected to a constant heat flux of 200 W. The properties of air at 80°C are p = 0.9994 kg/m³, k = 0.02953 W/m-K, v= 2.097 x 10-5 m²/s, cp=1008 J/kg-K, and Pr = 0.7154.

Required information Air flows in a pipe under fully developed conditions with an average velocity of 1.25 m/s and a temperature of 24°C. The pipe's inner diameter is 4 cm, and its length is 4 m. The first half of the pipe is kept at a constant wall temperature of 100°C. The second half of the pipe is subjected to a constant heat flux of 200 W. The properties of air at 80°C are p = 0.9994 kg/m³, k = 0.02953 W/m-K, v= 2.097 x 10-5 m²/s, cp=1008 J/kg-K, and Pr = 0.7154.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water at 50°C flows through an automobile radiator tube 0.5 cm inner diameter, 50 cm long with a mean velocity of 1 m/s. The surface of the radiator tube is at 30°C. Determine the heat transfer coefficient using Colburn Analogy. [Use friction factor f= 0.316 Re5 for turbulent and f= 0.184 Re for laminar.] The property values of Water at 50°C and 40°C are 50°C 40°C Density (kg/m) 990 995 Cp (kJ/kg K) 4.182 4.179 k (W/m K) 0.640 0.628 V (m/s) 5.67 x 10"| 6.57 x 107 Pr 3.68 4.34
Water at 50°C flows through an automobile radiator tube 0.5 cm inner diameter, 50 cm long with a mean velocity of 1 m/s. The surface of the radiator tube is at 30°C. Determine the heat transfer coefficient using Colburn Analogy. [Use friction factor f=0.316 Re/5 for turbulent and f=0.184 Re4 for laminar.] The property values of Water at 50°C and 40°C are 50°C 40°C Density (kg/m³) 990 995 Cp (kJ/kg K) 4.182 4.179 k (W/m K) 0.640 0.628 V (m/s) 5.67 x 10"| 6.57 × 10" Pr 3.68 4.34
Hot water (cp=4.18 kJ/kg.K, m = 2.8 kg/min) flows inside a tube (inner diameter = 9 mm, Length = 93 cm, thickness = 1.0 mm, outer surface is 204 kW/m. What is the convective heat transfer coefficient (W/m .K) on the outer surface? the average outer surface temperature of the tube is 93 C and that of surrounding air is 24 C. k tube = 40 W/m.K), if the heat flux on the tube
Water flows over a heated plate as shown below. The plate length is 0.17 m and its boundary condition is set as constant heat flux. Water flow velocity is 2 m/s and uniformly distributed heat flux is 75000 W/m2. Thermophysical properties of water may be approximated as: k = 0.620 W/mK, Pr = 5.2, ν = 0.96x10-6 m2/s
A circular tube (internal diameter=8 mm, length=20 m) subjected to a uniform heat flux of 30000 W/m2 on its surface. Water (ρ=1000 kg/m3, k=0.6 W/mK, ν=8x10-7 m2/s, cp=4.2 kJ/kg0C, Pr=6) enters the tube at 15 oC with a velocity of 1.1 m/s and leaves at 50 0C. Surface temperature of the tube at the inlet is
A copper bar of circular cross-section is cooled by air. The velocity and temperature of air is 1.2 m/s and 20°C. Maximum temperature limit of copper bar is fixed and its current carrying capacity is 100 amp under given conditions. The maximum current carrying capacity of bar when velocity of air becomes three times is. Amp.
solve, show assumptions and full solutions
Water with a velocity of 1 m/s through a pipe with an inner diameter of 32 mm and an outer diameter of 36 mm.passes. Water enters the pipe at 38°C and leaves at 22 °C. Heat conduction of pipe materialcoefficient is 54 W/m°C. A refrigerant evaporates outside the pipe at 10 °C.The heat transfer coefficient of the outer surface of the pipe is given as 1750 W/m^2°C. According to thisCalculate the required pipe length
In a dairy operation, milk at a flow rate of 0.25m3/hr and a cow-body temperature of 38.6°C must be chilled to a safe-to- store temperature of 13°C. Cold water at 2.2°C is available at a flow rate of 0.94m3/hr. The density and specific heat of milk are 1030 kg/m3 and 3860 J/kg.K, respectively. The density and specific heat of water is 1000 kg/m3 and 4187 J/kg.K. The chilling process is done by a double pipe counter-flow exchanger with an overall heat transfer coefficient U=1000 W/m2.K. The pipe of the heat exchanger has a 50-mm diameter with negligible thickness. Determine the pipe length L required. Select one: O a. 2.28 m O b. 4.28 m O c. 3.28 m O d. 1.28 m
Water flows at a rate of 0.8 kg /s in a 2.5 -cm diameter tube whose surface is maintained at a constant temperature of 90°C. If water must be heated from 35°C to 40°C, what is the value of the temperature on which you will base the value of the thermal conductivity that will be used to compute for the convection heat transfer coefficient? Express in Celsus.
Determine the convection heat transfer coefficient (in W/m2-K) for air flowing at a velocity of 3 m/s in a 10-cm diameter and 10-m long tube. Air enters the tube at 10°C and leaves at 20°C, i.e. air is heated. Take the property of air at 1 atm and assume flow to be fully developed. For air at 1 atm: Temperature k, W/m-K v, m?/s Pr 15°C 0.02476 1.470x10-5 0.7323 20°C 0.02514 1.516×10-5 0.7309 25°C 0.02551 1.562x105 0.7296
e