! Required information Air flows in a pipe under fully developed conditions with an average velocity of 1.25 m/s and a temperature of 24°C. The pipe's inner diameter is 4 cm, and its length is 4 m. The first half of the pipe is kept at a constant wall temperature of 100°C. The second half of the pipe is subjected to a constant heat flux of 200 W. The properties of air at 80°C are p = 0.9994 kg/m³, k = 0.02953 W/m-K, v= 2.097 x 10-5 m²/s, cp= 1008 J/kg-K, and Pr = 0.7154. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Air 1.25 m/s 2m T, = 100°C D = 4 cm 2m 0,= 200 W Determine the wall temperature at the exit of the tube. The wall temperature at the exit of the tube is 282 °C.

! Required information Air flows in a pipe under fully developed conditions with an average velocity of 1.25 m/s and a temperature of 24°C. The pipe's inner diameter is 4 cm, and its length is 4 m. The first half of the pipe is kept at a constant wall temperature of 100°C. The second half of the pipe is subjected to a constant heat flux of 200 W. The properties of air at 80°C are p = 0.9994 kg/m³, k = 0.02953 W/m-K, v= 2.097 x 10-5 m²/s, cp= 1008 J/kg-K, and Pr = 0.7154. NOTE: This is a multi-part question. Once an answer is submitted, you will be unable to return to this part. Air 1.25 m/s 2m T, = 100°C D = 4 cm 2m 0,= 200 W Determine the wall temperature at the exit of the tube. The wall temperature at the exit of the tube is 282 °C.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A steel tube with 5 cm ID, 7.6 cm OD and k = 15 W/m °C is covered with an insulative covering of thickness 2 cm and k = 0.2 W/m °C. A hot gas at 330 °C with h= 400 W/m² °C flows inside the tube. The outer surface of the insulation is exposed to cooler air at 30 °C with h = 60 W²/m °C. Calculate the heat loss from the tube to the air for 10 m of the tube and the temperature drops resulting from the thermal resistances of the hot gas flow, the steel tube, the insulation layer, and the outside air. (Ans: q/L=7451.72 W; AT₁=11.859 °C; AT₂=3.31 °C; AT₁=250.75 °C; AT₁= 34.07 °C)
A thick concrete wall having a uniform temperature of 50oC is suddenly subjected to a stream of water so that the surface temperature is suddenly lowered to 15oC. How long will it take to cool the concrete to 30oC at a depth of 5 cm from the surface? Data: concrete properties, k = 1.37 W/m×oC, r = 2100 kg/m3, a = 7.5×10-7 m2/s.
Harry up plz
solve, show assumptions and full solutions
Water with a velocity of 1 m/s through a pipe with an inner diameter of 32 mm and an outer diameter of 36 mm.passes. Water enters the pipe at 38°C and leaves at 22 °C. Heat conduction of pipe materialcoefficient is 54 W/m°C. A refrigerant evaporates outside the pipe at 10 °C.The heat transfer coefficient of the outer surface of the pipe is given as 1750 W/m^2°C. According to thisCalculate the required pipe length
A liquid is heated from 20 to 70 oC as it flows at 0.025 kg/s through a steel tube of 10 mm and 12m long. A uniform heat flux is maintained on the tube surface. Using the following liquid properties ρ = 1000 kg/m3, Cp = 4100 J/kg.K, k = 0.45 W/m.K, Pr = 10, μ = 2x10-3 kg/s.m. Calculate the average heat flux on the tube. Calculate the heat transfer coefficient at end of tube Calculate the surface temperature at exit and the heat transfer coefficient for first 1m of pipe?
Please help me fast
Water is flowving in a tube “D = 3 cm, L=5 m" and is to be heated from 15°C to 47°C by applying a uniform heat flux on the outer surface of the tube by electric resistance heater. If the Power rating is 11kW and the convective heat transfer coefficient is 864 W/m².K, what is the surface temperature at the exit “°C"? 3 Properties : p = 992.1 kg/m , C = 4179 J/kg.°C, k= 0.631 W/m°C, Pr = 4.32, v = 0.658E-6 m /s
Water flows at a rate of 0.8 kg /s in a 2.5 -cm diameter tube whose surface is maintained at a constant temperature of 90°C. If water must be heated from 35°C to 40°C, what is the value of the temperature on which you will base the value of the thermal conductivity that will be used to compute for the convection heat transfer coefficient? Express in Celsus.
e
Hot water is flowing though the center of a AISI 304 stainless steel pipe with a diameter of 300mm, a wall thickness of 10mm and a length of 5m. The pipe is coated with a 2.5mm thick layer of Teflon and covered with a 30mm thick layer of insulation. The water is flowing at a velocity of 0.0015 m/s. Assume the velocity profile to be fully developed. The water is at a temperature of 92°C and the air surrounding the pipe is at 22°C. Some transport properties and dimensions are shown in the table below. 1. What is the heat transfer rate through the pipe and insulation? 2. What is the heat flux at the inner pipe surface and the outer surface of the insulation? 3. What is the temperature of the outer surface of the insulation? Insulation Pipe Too water Uwater Teflon Tm air hair Pipe inner diameter: 300mm Pipe wall thickness: 10mm Teflon Layer thickness: 2.5mm Insulation thickness: 30mm Length: 5m To, water: 92°C Lair: 22°C hair: 75 W/m2/K k30455: 15.2 W/m/K kTeflon: 0.38 W/m/K kinsulation:…
Water (5.0 L/min) is flowing in a tube "D = 3 cm, L= 5 m" and is to be neated from 15°C to 64.0°C by applying a uniform heat flux on the outer surface of the tube by electric resistance heater. What is the convective heat transfer coefficient (W/m .K)? %3D 0.8 If turbulent flow use Dituss-Boetler relation Nu= 0.023 Re Pr. 3 Properties : p= 992.1 kg/m , C,= 4179 J/kg. °C, k = 0.631 WM°C, Pr = 4.32, v = 0.658E-6 m /s Select one