Q1/Consider a compressed air pipe of length L= 4.5 m, inner diameter 7.4 cm, outer diameter 8 cm, and thermal conductivity k =14 W/m °C equipped with a 300-W strip heater. Air is flowing through the pipe at an average temperature of (- 8°C), and the average convection heat transfer coefficient on the inner surface is h= 30 W/m - °C. Assuming 10 percent of the heat generated in the strip heater is lost through the insulation, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the pipe, (b) obtain a relation for the variation of temperature in the pipe material by solving the differential equation, and (c) evaluate the outer surface temperature of the pipe.

Q1/Consider a compressed air pipe of length L= 4.5 m, inner diameter 7.4 cm, outer diameter 8 cm, and thermal conductivity k =14 W/m °C equipped with a 300-W strip heater. Air is flowing through the pipe at an average temperature of (- 8°C), and the average convection heat transfer coefficient on the inner surface is h= 30 W/m - °C. Assuming 10 percent of the heat generated in the strip heater is lost through the insulation, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the pipe, (b) obtain a relation for the variation of temperature in the pipe material by solving the differential equation, and (c) evaluate the outer surface temperature of the pipe.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A steel tube with 5 cm ID, 7.6 cm OD and k = 15 W/m °C is covered with an insulative covering of thickness 2 cm and k = 0.2 W/m °C. A hot gas at 330 °C with h= 400 W/m² °C flows inside the tube. The outer surface of the insulation is exposed to cooler air at 30 °C with h = 60 W²/m °C. Calculate the heat loss from the tube to the air for 10 m of the tube and the temperature drops resulting from the thermal resistances of the hot gas flow, the steel tube, the insulation layer, and the outside air. (Ans: q/L=7451.72 W; AT₁=11.859 °C; AT₂=3.31 °C; AT₁=250.75 °C; AT₁= 34.07 °C)
A cube is being cooled within a tube that has air being pushed by a fan. The heat transfer coefficient (h) for the cube is lower when it is at the center of the tube, and higher when it is at the edges (resulting in a concave up parabola when it is plotted against the position). Why does this occur?
Please solve this prob, Thank you
Water with a velocity of 1 m/s through a pipe with an inner diameter of 32 mm and an outer diameter of 36 mm.passes. Water enters the pipe at 38°C and leaves at 22 °C. Heat conduction of pipe materialcoefficient is 54 W/m°C. A refrigerant evaporates outside the pipe at 10 °C.The heat transfer coefficient of the outer surface of the pipe is given as 1750 W/m^2°C. According to thisCalculate the required pipe length
Local Nusselt number for fully developed (hydrodynamically and thermally) turbulent flow in a smooth circular tube is defined by Nup-hD/kr, where h, D, and kr are the convective heat transfer coefficient, tube diameter, and fluid thermal conductivity, respectively. The friction factor for the smooth circular tube is given by the Blasius correlation, f-0.316Red ¹/4. The Reynolds number is defined by Rep-prviD/μr, where pr, vr, and ur are the fluid density, fluid velocity, and fluid viscosity, respectively. The Blasius correlation is applicable to Rep<2×10¹. Considering the analogy between velocity and thermal boundary layers and using the Blasius correlation, express the local Nusselt number using Reynolds and Prandtl numbers in the form of NuD-A-ReDxPr. The Prandtl number is defined by Pr-war, where and ar are the fluid kinematic viscosity and fluid thermal diffusivity, respectively. Note that the local Nusselt number formula should be applicable to Rep<2×10 and 0.6
Please help me fast
A computer room located on the second floor of a five-story office building is 10m by 7 m. The exterior wall is 3.5 m high and 10 m long; it is a metal curtain wall (steel backed with 10 mm of insulating board), 75 mm of glass-fiber insulation, and 16 mm of gypsum board. Single-glazed windows make up 30 percent of the exterior wall. The computer and lights in the room operate 24 h/d and have a combined heat release to the space of 2 kw. The indoor temperature is 20 C. (a) If the building is located in Columbus, Ohio, determine the heating load at winter design conditions. (b) What would be the load if the windows were double-glazed?
In a dairy operation, milk at a flow rate of 0.25m3/hr and a cow-body temperature of 38.6°C must be chilled to a safe-to- store temperature of 13°C. Cold water at 2.2°C is available at a flow rate of 0.94m3/hr. The density and specific heat of milk are 1030 kg/m3 and 3860 J/kg.K, respectively. The density and specific heat of water is 1000 kg/m3 and 4187 J/kg.K. The chilling process is done by a double pipe counter-flow exchanger with an overall heat transfer coefficient U=1000 W/m2.K. The pipe of the heat exchanger has a 50-mm diameter with negligible thickness. Determine the pipe length L required. Select one: O a. 2.28 m O b. 4.28 m O c. 3.28 m O d. 1.28 m
Water is flowving in a tube “D = 3 cm, L=5 m" and is to be heated from 15°C to 47°C by applying a uniform heat flux on the outer surface of the tube by electric resistance heater. If the Power rating is 11kW and the convective heat transfer coefficient is 864 W/m².K, what is the surface temperature at the exit “°C"? 3 Properties : p = 992.1 kg/m , C = 4179 J/kg.°C, k= 0.631 W/m°C, Pr = 4.32, v = 0.658E-6 m /s
Please answer
Harry up plz
Example: 0.5 kg of water per minute is heated from 20° to 40°C when passed through a tube of 2.5 cm diameter steel pipe. The pipe surface temperature is maintained at 110°C by condensing steam on its surface. Find out the length of the pipe required. The properties of water at mean temperature of 70°C are given below: p = 978 kg/m² k= 0.575 W/m. K Cp = 4200 J/kg. K v = 0.415 x 10-6 m²/sec