From the figure shown, Material 1 (brown) is enclosed inside Material 2 (grey). If there would be a load directly appliediscussionson material 2, what should be the minimum inside diameter of material 2, so that there is no contact pressure betweenthe material 1 and material 2?GradesForce P = 357.5 kNPeople%3DDiameter of Material 1 = 88.75 mmPagesPoisson's Ratio = 0.355SyllabusModulus of Elasticity of Mat. 2 88.56 x 10 A9 N/m^2QuizzesModulesBigBlueButtonCollaborationsBadgesGoogle DriveOffice 365ChatTLP Manila LibranyVideo PresentationCanvas LMSSatisfactory SunveyILP STUDENTSCOVID-19

Given:P=357.5 KND=88.75 mmμ=0.355E=88.56*109 Pa

From the figure shown, Material 1 (brown) is enclosed inside Material 2 (grey). If there would be a load directly applied on material 2, what should be the minimum inside diameter of material 2, so that there is no contact pressure between the material 1 and material 22 Force P = 357.5 kN Diameter of Material 1-88.75 mm %3D Poisson's Ratio - 0.355 !3! Modulus of Elasticity of Mat 2 = 88.56 x 10 9 N/m^2

From the figure shown, Material 1 (brown) is enclosed inside Material 2 (grey). If there would be a load directly applied on material 2, what should be the minimum inside diameter of material 2, so that there is no contact pressure between the material 1 and material 22 Force P = 357.5 kN Diameter of Material 1-88.75 mm %3D Poisson's Ratio - 0.355 !3! Modulus of Elasticity of Mat 2 = 88.56 x 10 9 N/m^2

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A) If the modulus of elasticity of the material is E = 1870 MPa , what is Poisson's ratio? B)The block is subjected to a force V that produces a deflection of Δ = 0.15 cm . What is the applied force?
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 12600 ksi] rods, and a solid steel [E = 32100 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.61 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.42 in. Assume L₁-53 in and L₂=73 in. If all bars are unstressed before the load P is applied, determine the normal stresses in bronze rods (1) and steel rod (2) after a load of P = 21 kips is applied. Answers: 0₁ = i 02 = i L₂ (2) B ksi. ksi.
Rigid bar ABCD is loaded and supported. Bars (1) and (2) are unstressed before the load P is applied. Bar (1) is made of bronze [E= 100 GPa] and has a cross-sectional area of 400 mm2. Bar (2) is made of aluminum [E= 70 GPa] and has a cross-sectional area of 600 mm2. After the load P is applied, the force in bar (1) is found to be 60 kN (in compression). Determine: (a) the stresses in bars (1) and (2).(b) the vertical deflection of point A.(c) the load P.
Figure 2 shows a bar with a length L fixed at the left end. Question 2 The uniformly distributed force f (unit: N/m) is applied along the axis of the bar, and a concentrated force P (unit: N) is applied at the free end of the bar. The bar has a constant Young's modulus E and cross-section area A. Find the stretch of the bar: (a). at the free end of the bar; (b). at the center of the bar. (Expressing all the resulta with E, A, L, f, and P). E, A L Fig. 2. The kft end of the bar is fd, ad the froe ed of the bar is applied with a force P. The uniformly distribatod kece f is applied akong the ais of the bar.
Question 1 The cube in Figure Ql made of 200 mm sides of a certain material is subjected to a volumetric stress of 50 N/mm?. Determine the change in its volume if the Bulk modulus of the material is 100x10° N/mm?. 200 mm Figure Q1: Cube subjected to volumetric stress
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 15800 ksi] rods, and a solid steel [E = 27600 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.62 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.41 in. Assume L₁=30 in and L₂-62 in. If all bars are unstressed before the load P is applied, determine the normal stresses in bronze rods (1) and steel rod (2) after a load of P=32 kips is applied. Answers: 0₁ = 02 = i L₂ B ksi. ksi.
A rubber block with dimensions of 120x120x120 mm is compressed in a rigid mold cavity with a vertical force of F=120 kN. In the rubber block, a) Find the stress in the vertical direction (in the y direction). b) Find the stress in the horizontal direction (in the x direction). c) Find the value (mm) of the deformation in the vertical (y direction). Rubber block, The modulus of elasticity E = 820 MPa. Poisson ratio v = 0.4
Rigid bar ABCD is loaded and supported. Steel [E=30,000 ksi] bars (1) and (2) are unstressed before the load P is applied. Bar (1) has a cross-sectional area of 0.625 in.2 and bar (2) has a cross-sectional area of 1.25 in. 2. After load P is applied, the strain in bar (2) is found to be 900 με. If there is a clearance of 0.05 in. in the pin connection at C, determine: (a) the stresses in bars (1) and (2).(b) the vertical deflection of point D.(c) the load P.
A load P is supported by a structure consisting of rigid bar ABC, two identical solid bronze [E = 14100 ksi] rods, and a solid steel [E = 28000 ksi] rod, as shown. The bronze rods (1) each have a diameter of 0.61 in. and they are symmetrically positioned relative to the center rod (2) and the applied load P. Steel rod (2) has a diameter of 0.47 in. Assume L₁-39 in and L2-72 in. If all bars are unstressed before the load P is applied, determine the normal stresses in bronze rods (1) and steel rod (2) after a load of P = 29 kips is applied. O (1) A Answers: 0₁ = i 0₂ = i L2 (2) B P ksi. ksi. L