bb) Hot air at 60 °C leaving the furnace of a house enters a 12 m long section of a sheetmetal duct of rectangular cross section 20 cm x 20 cm at an average velocity of4 m/s. The thermal resistance of the duct is negligible, and the outer surface of theduct, whose emissivity is 0.3, is exposed to the cold air at 10 °C in the basement,with a convection heat transfer coeffbasement to be at 10 °C also, detleave the basemeņt and 6) the rate of heat loss from the hot air in the duct to thebasement. (2622 W, 45.1 C)y of 10 W/m².°C. Taking the walls of theine (a) the temperature at which the hot air willHma

Answered: Image /qna-images/answer/803b2e21-2520-4178-b705-24fc0d04768e.jpg

bb) Hot air at 60 °C leaving the furnace of a house enters a 12 m long section of a sheet metal duct of rectangular cross section 20 cmx 20 cm at an average velocity of 4 m/s. The thermal resistance of the duct is negligible, and the outer surface of the duct, whose emissivity is 0.3, is with a convection heat transfer coe o the cold air at 10 °C in the basement, of 10 W/m2.°C. Taking the walls of the basement to be at 10 °C also, determine (a) the temperature at which the hot air will leave the basement and 6) the rate of heat loss from the hot air in the duct to the basement. (2622 W 45.1G)

bb) Hot air at 60 °C leaving the furnace of a house enters a 12 m long section of a sheet metal duct of rectangular cross section 20 cmx 20 cm at an average velocity of 4 m/s. The thermal resistance of the duct is negligible, and the outer surface of the duct, whose emissivity is 0.3, is with a convection heat transfer coe o the cold air at 10 °C in the basement, of 10 W/m2.°C. Taking the walls of the basement to be at 10 °C also, determine (a) the temperature at which the hot air will leave the basement and 6) the rate of heat loss from the hot air in the duct to the basement. (2622 W 45.1G)

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water (5.2 L'min) is flowing in a tube "D-3 cm, L- 5 m" and is to be heated from 15 C to 59.9°C by applying a uniform heat flux on the outer surface of the tube by electric resistance heater. What is the power rating of the resistance heater (kW)? If turbulent flow use Dituss-Boetler relation Nu- 0.023 Re Pr. ed 2.00 08 on Properties : p= 992.1 kg/m , C,-4179 J/kg. C, k= 0.631 W/wm°C, Pr = 4.32, v = 0.658E-6 Select one: O A 20.55 O B. 17.63 O.19.17 O D. 14.58 O E. 16.13
Determine the convection heat transfer coefficient (in W/m2-K) for air flowing at a velocity of 3 m/s in a 10-cm diameter and 10-m long tube. Air enters the tube at 10°C and leaves at 20°C, i.e. air is heated. Take the property of air at 1 atm and assume flow to be fully developed. For air at 1 atm: Temperature k, W/m-K v, m?/s Pr 15°C 0.02476 1.470x10-5 0.7323 20°C 0.02514 1.516x10-5 0.7309 25°C 0.02551 1.562x10-5 0.7296 Hint: When the fluid temperature changes, we use its properties at mean temperature, unless otherwise specified. Round your answer to 2 decimal places.
Hot water at an average temperature of 80°C and an average velocity of 1.5 m/s is flowing through a 25-m section of a pipe that has an outer diameter of 5 cm. The pipe extends 2 m in the ambient air above the ground, dips into the ground (k= 1.5 W/m-°C) vertically for 3 m, and continues horizontally at this depth for 20 m more before it enters thenext building. The first section of the pipe is exposed to the ambient air at 8°C with a heat transfer coefficient of 22 W/m2.°C. If the surface of the ground is covered with snow at 0°C, determine: (a) Heat loss from the part of the tube that is on the ground. (b) Heat loss for vertical part of the tube. The shape factor, and the rate of heat loss on the horizontal part that is in the ground. (d) Total rate of heat loss from the hot water. (e) The temperature drop of the hot water as it flows through this 25-m section of the wall.
Hot air leaving the stove in the kitchen of a house at 70 0C, with a square section of 22 cm x 22 cm. sheet metal enters the 12 m long section of the channel with a speed of 6 m/s. Emissivity 0.3 The outer surface of the duct, whose thermal resistance is neglected, is located in the basement of the house at 14 0C and 12 W/m2 . It is in contact with cold air with 0C convection heat transfer coefficient. Basement Find the heat loss rate from the hot air in the duct to the floor by taking the wall temperatures of the floor to 14 0C.
A pneumatic lift consists of a vertical cylinder with aradius of 10.0 cm. A movable piston slides within the cylinder atits upper end and supports a platform on which loads are placed. Anintake valve allows compressed air from a tank to enter the cylinder,and an exhaust valve allows air to be removed from the cylinder. Ineither case the rate of air transfer is sufficiently low that the temperaturein the cylinder remains constant. When neither valve is activated,the cylinder is airtight. The piston and platform together have a massof 50.0 kg, the temperature is 20.0C, and the pressure outside thecylinder is 1.00 atm. The intake valve is activated and compressed air enters the cylinder so that the platform moves back to its original height. How many moles of air were introduced?
Hot water at 90°C flows on the inside of a 2.5-cm-ID steel tube with 0.8mm wall thickness at a velocity of 4 m/s. Engine oil at 20°C is forced across the tube at a velocity of 7 m/s. If the convection heat transfer coefficient at the inner and outer surface areas of the tube are 20,000 and 1167 W/m2-°C, respectively. Calculate the overall heat transfer coefficient based on the outer surface area of the tube. k (steel) = 36 W/m-°C
Hot air at 60°C leaving the furnace of a houseenters a 12-m-long section of a sheet metal duct of rectangularcross section 20 cm * 20 cm at an average velocityof 4 m/s. The thermal resistance of the duct is negligible,and the outer surface of the duct, whose emissivity is 0.3,is exposed to the cold air at 10°C in the basement, with aconvection heat transfer coefficient of 10 W/m2?K. Taking thewalls of the basement to be at 10°C also, determine (a) thetemperature at which the hot air will leave the basement and(b) the rate of heat loss from the hot air in the duct to thebasement. Evaluate air properties at a bulk mean temperatureof 50°C. Is this a good assumption?
Water with a velocity of 1 m/s through a pipe with an inner diameter of 32 mm and an outer diameter of 36 mm.passes. Water enters the pipe at 38°C and leaves at 22 °C. Heat conduction of pipe materialcoefficient is 54 W/m°C. A refrigerant evaporates outside the pipe at 10 °C.The heat transfer coefficient of the outer surface of the pipe is given as 1750 W/m^2°C. According to thisCalculate the required pipe length
In a dairy operation, milk at a flow rate of 0.25m3/hr and a cow-body temperature of 38.6°C must be chilled to a safe-to- store temperature of 13°C. Cold water at 2.2°C is available at a flow rate of 0.94m3/hr. The density and specific heat of milk are 1030 kg/m3 and 3860 J/kg.K, respectively. The density and specific heat of water is 1000 kg/m3 and 4187 J/kg.K. The chilling process is done by a double pipe counter-flow exchanger with an overall heat transfer coefficient U=1000 W/m2.K. The pipe of the heat exchanger has a 50-mm diameter with negligible thickness. Determine the pipe length L required. Select one: O a. 2.28 m O b. 4.28 m O c. 3.28 m O d. 1.28 m
Water is flowving in a tube “D = 3 cm, L=5 m" and is to be heated from 15°C to 47°C by applying a uniform heat flux on the outer surface of the tube by electric resistance heater. If the Power rating is 11kW and the convective heat transfer coefficient is 864 W/m².K, what is the surface temperature at the exit “°C"? 3 Properties : p = 992.1 kg/m , C = 4179 J/kg.°C, k= 0.631 W/m°C, Pr = 4.32, v = 0.658E-6 m /s
A gas flows over a heated horizontal surface with a surface temperature that is uniform and higher in value than the temperature of the gas. The local convective coefficient in W/m².K of this flow with convective heat transfer can be given as a function of the distance x (in meters) from the beginning of the horizontal surface by: h = A xD + B x + C, where A = -2.4, B = 14.8, C = 9.3 and D = 2.7. Based on this information, calculate the average Nusselt number of the flow over the plate if it is three meters long. Consider: ρgas = 0.9950 kg/m³; kgas = 30 x 10-3 W/m.K. Note: Use the equations given in the book by Schmidt et al. for problem resolution.
Determine the convection heat transfer coefficient (in W/m2-K) for air flowing at a velocity of 3 m/s in a 10-cm diameter and 10-m long tube. Air enters the tube at 10°C and leaves at 20°C, i.e. air is heated. Take the property of air at 1 atm and assume flow to be fully developed. For air at 1 atm: Temperature k, W/m-K v, m?/s Pr 15°C 0.02476 1.470x10-5 0.7323 20°C 0.02514 1.516×10-5 0.7309 25°C 0.02551 1.562x105 0.7296