Q) Water at 12°C flows in a 2.5-cm-diameter pipe and 10-m-long at an average velocity of 0.1 m/s. The surface temperature of the pipe is maintained at 0°C. Disregarding the heat losses with the surrounding, determine; (a) The outlet water temperature, (b) The rate of heat transfer from the water, and (c) The pumping power required to overcome the pressure losses and to maintain the water flowing in the pipe. Take the film (bulk) water temperature to be the inlet water temperature.

Q) Water at 12°C flows in a 2.5-cm-diameter pipe and 10-m-long at an average velocity of 0.1 m/s. The surface temperature of the pipe is maintained at 0°C. Disregarding the heat losses with the surrounding, determine; (a) The outlet water temperature, (b) The rate of heat transfer from the water, and (c) The pumping power required to overcome the pressure losses and to maintain the water flowing in the pipe. Take the film (bulk) water temperature to be the inlet water temperature.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Consider a 10-m-long smooth rectangular tube, with a = 50 mm and b= 25 mm, that is maintained at a constant surface temperature. Liquid water enters the tube at 20°C with a mass flow rate of 0.027 kg/s. Determine the tube surface temperature necessary to heat the water to the desired outlet temperature of 80°C. (Nu = 3.39) "C
Water at 20°C flows through smooth tubes of 25 mm dia at a mean velocity of 2.2 m/s. The surface of the tube is at 5°C and the water is chilled in the process. The tube is 4 m long. Determine the outlet temperature of the water.
Consider the flow of oil at 20°C in a 30-cm-diameter pipeline at an average velocity of 2 m/s. A 200-m-long section of the horizontal pipeline passes through icy waters of a lake at 0°C. Measurements indicate that the surface temperature of the pipe is very nearly 0°C. Disregarding the thermal resistance of the pipe material, determine (a) the temperature of the oil when the pipe leaves the lake, (b) the rate of heat transfer from the oil, and (c) the pumping power required to overcome the pressure losses and to maintain the flow of the oil in the pipe.
A pipe with a 1.5 cm in diameter and 10 min length is gaining 800 W/m2 constant heat from its outer surface. Water enters the pipe at 25 °C with velocity of 0.1 m/s. What is the wall temperature at the exit plane of the pipe? Assume that all gaining heat is transferring the water. For water: k = 0.6 W/mK, ν = 0.75x10-6 m2/s, ρ = 1000 kg/m3, cp = 4187 J/kgK, Pr = 6. Please choose one: A. 30.10 °C B. 40.50 °C C. 34.68 °C D. 35.56 °C
Heat Transfer Lesson The temperature will be increased from 10 (Degree Celsius oC) to 90 (Degree Celsius oC) while the water flows through a 1.5 cm inner diameter and 7 meter long straight pipe. Equipped with electric heater on the entire surface of the pipe. Even heating throughout. The outer surface of the heater is well insulated and therefore all heat generated in the heater in continuous operation is transferred to the water in the pipe. If the system provides a hot water flow rate of 6 liters / minute. (Thermophysical properties of water at 50 oC:ρ = 988 m3/kg, k= 0.6305 W/m oC, cp=4181 J/kg oC, Pr=3.628, μ= 0.0005471 kg/m.s ) a)Find the power of the resistance heater [W]. b)Calculate the inner surface temperature [oC] of the pipe at the outlet. c)Find the pressure drop [Pa]. d)Find the pump power [W] required to overcome this pressure drop.
A constant heat flux of 40 W/cm² is applied from the outside to the three surfaces (top surface adiabatic) of a 6cmx6cm square pipe. Water enters the pipe at 25°C and its flow rate is 1 kg/s. If the length of the channel is 1.5 m, what will the outlet temperature of the water be? You can get the properties of water at 320K.
Water at 50°C flows through an automobile radiator tube 0.5 cm inner diameter, 50 cm long with a mean velocity of 1 m/s. The surface of the radiator tube is at 30°C. Determine the heat transfer coefficient using Colburn Analogy. [Use friction factor f= 0.316 Re5 for turbulent and f= 0.184 Re for laminar.] The property values of Water at 50°C and 40°C are 50°C 40°C Density (kg/m) 990 995 Cp (kJ/kg K) 4.182 4.179 k (W/m K) 0.640 0.628 V (m/s) 5.67 x 10"| 6.57 x 107 Pr 3.68 4.34
Consider the flow of oil at 20oC in a 40-cm-diameter pipeline at an average velocity of 0.5 m/s. A 300-m-long section of the pipeline passes through icy waters of a lake at 0°C. Measurements indicate that the surface temperature of the pipe is very nearly 0°C. Disregarding the thermal resistance of the pipe material, determine the temperature of the oil when the pipe leaves the lake, and the rate of heat transfer from the oil ρ=893.5 kg/m3 Cp=1838 J/kgoC, k=0.146W/m ̊C, Pr=28750, V = 259,1x10-5 m2/s
Liquid mercury is flowing at 0.9kg/s through a 5-cm diameter tube with inlet and outlet mean temperatures of 100°C and 200°C, respectively. The tube surface temperature is maintained constant at 250°C. Determine the tube length using the Dittus-Boelter equation, in m. ______ m
Water is heated at a rate of 10 kg/s from a temperature of 15°C to 35°C by passing it through five identical tubes, each 5.0 cm in diameter, whose surface temperature is 60.0°C. Estimate (a) the steady rate of heat transfer and (b) the length of tubes necessary to accomplish this task.
Atmospheric air enters the heated section of a circular tube at a flow rate of 0.01 kg/s and a temperature of 30oC. The tube is of diameter D=40 mm, and fully developed conditions with h=25 W/m2K exist over the entire length of L=5m. For the case of uniform surface heat flux at 1500W/m2 , determine the total heat transfer rate q and the mean temperature of the air leaving the tube Tm,o. What is the value of the surface temperature at the tube inlet Ts,i and outlet Ts,o?
Air at p = 1 atm enters a thin-walled (D = 5-mm diameter) long tube (L = 2 m) at an inlet temperature of Tmi = 100°C. A constant heat flux is applied to the air from the tube surface. The air mass flow rate is m = 140x 10-6 kg/s. If the tube surface temperature at the exit is T, = 160°C, determine the heat rate entering the tube, in W. Evaluate properties at T = 400K. q = i