A tank is initially filled with 100 gallon of salt solution containing 100 Hb of salt. Fresh brine containing 2 Hb of salt per gallon runs into the tank at the rate 5 gal./min. and the mixture, assumed to be kept uniform by stirring, runs out at the same rate. Find the amount of salt in the tank at any time, and determine how long it will take for this amount to reach 150 Hb.

A tank is initially filled with 100 gallon of salt solution containing 100 Hb of salt. Fresh brine containing 2 Hb of salt per gallon runs into the tank at the rate 5 gal./min. and the mixture, assumed to be kept uniform by stirring, runs out at the same rate. Find the amount of salt in the tank at any time, and determine how long it will take for this amount to reach 150 Hb.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

An oil and water of equal parts is poured in a hemispherical bowl. The oil settling above the water. If the segment of the oil is 4 inches, the total depth of the mixture is 12 inches. find the diameter of the bowl. O 14.6 inches O 7.3 inches O 14.7 inches O 29.3 inches
ES C raudon . A water contains 200 mg/L Ca, 75 mg/L Mg, 180 mg/L HCO,, and 150 mg/L. CO₂, all expressed as CaCO3. Determine the chemical dosages required to soften this water as much as possible without removing magnesium. What will the final hardness be? let
How many pounds per day (lbs/day) of lime and soda ash need to be delivered daily to a plant treating groundwater with the following characteristics (do not worry about adding any safety factor, even though you would in the real world): Calcium Carbonate Hardness (CaCH) = 200 mg/L as Calcium Carbonate Magnesium Non-Carbonate Hardness = 100 mg/L as Calcium Carbonate (Use soda ash; carbon dioxide is not an option) Alkalinity= 200 mg/L as Calcium Carbonate Flow Treated = 10 MGD The answers are expressed in units of lbs/day with lime first followed by soda ash O 4,800 and 3,100 O 22,600 and 31,000 O 15,000 and 7,400 O 18,500 and 8,800
5. In water and wastewater treatment processes a filtration device may be used to remove water from the sludge formed by a precipitation reaction. The initial concentration of sludge from a softening reaction is 2 percent (20,000 mg/L) and the volume of sludge is 100 m3. After filtration the sludge solids concentration is 35 percent. Assume that the sludge does not change density during filtration, and that liquid removed from the sludge contains no sludge. Using the mass balance method, determine the volume of sludge after filtration.
Using a mass balance, derive a design equation (concentration as a function of time) for a batch system with second order reaction kinetics (r = -kC2). If the units of concentration and time are mol/L and s, what are the units of k?
Please answer the problem:a tank initially contains 100 gal of brine in which 50 lb of salt are dissolved. for the inflow, every 3 gallons of brine each containing 2lbs of salt ran into the tank every minute, and that mixture is kept uniform by mixing having an outflow of 2 gallons per minute, determine the amount of salt after 20mins. a. 183.63b.82.79 c.135.83d.49.29
11-7. A water contains 200 mg/L Ca, 75 mg/L Mg, 180 mg/L HCO3, and 150 mg/L CO₂- all expressed as CaCO3. Determine the chemical dosages required to soften this water as much as possible without removing magnesium. What will the final hardness be? 1-8. If the water of P7 is to be softened to a final hardness of 85 mg/L as CaCO, and is not to contain more than 25 mg/L. Mg as CaCO3, find the required chemical dosages. 1-9. Design a cation-exchange process which will produce a water meeting the criteria of PT-8. Assuming the salt must be provided in an excess of 100 percent, how much salt would be used per year in a plant with a capacity of 5000 m³/day? Solve 11-8 & 11-7 The manufacturer recom-
Q3: the 2000 gallon tank initially contains 600 gallons of water with 5 lbs of salt dissolved in it. Water enters the tank at a rate of 9 gal/hr and the water entering the tank has a salt concentration of 0.2 (1+cos(t)) lbs/gal. If a well-mixed solution leaves the tank at a rate of 6 gal/hr, how much salt is in the tank when it overflows?
Problem 4. A vessel contains 200 Liters of brine with 30 grams of dissolved salt. Brine containing 1 gram of salt per liter enters the vessel at 4 liters per minute. The solution is kept thoroughly mixed and drains from the vessel at the same rate. Calculate the amount of salt in the tank after 5 minutes.
Mixtures of Non- Reacting Fluids A 100-L container contains 50 L of water and 50 g of soluble chemical at the start. At a rate of 3 L/min, a pre-mixed solution containing 2 grams of the soluble chemical per liter is pumped in. The output of well-stirred mixes is 2.5 L/min. What is the chemical concentration in water as the container fills up?