A rubber block with dimensions 120x120x120 mm is a rigid mold It is compressed with a vertical force of F = 120 kN inside the cavity. In the rubber block, Can you find the stress in the horizontal direction (in the x direction)? (Note: The mold cavity is in the shape of a prismatic box. Vertical Force F is applied in the y direction. x and z directions are closed) Rubber block, (Elasticity modulus E = 820 MPa , Poisson ratio v=0,4)

A rubber block with dimensions 120x120x120 mm is a rigid mold It is compressed with a vertical force of F = 120 kN inside the cavity. In the rubber block, Can you find the stress in the horizontal direction (in the x direction)? (Note: The mold cavity is in the shape of a prismatic box. Vertical Force F is applied in the y direction. x and z directions are closed) Rubber block, (Elasticity modulus E = 820 MPa , Poisson ratio v=0,4)

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.6.3P: A standard brick (dimensions 8 in. × 4 in. × 2.5 in ) is compressed lengthwise by a force P. as...

See similar textbooks

Related questions

Q: A 12 mm thick steel tire has a width of 110 mm has an internal diameter of 800 mm. Tire is heated…

A: Answer: (a) The tensile stress in the tire is 125 MPa. (b) The compressive pressure between the tire…

Q: A cube of side 40 mm, subjected to 3 mutually perpendicular tensile forces of 9 kN, 5 kN, 5 kN…

Q: Consider a long cylindrical solid rod – total length L – mass density p; – radius R1 = R2 = R; -…

Q: Let's consider a rod having a solid circular cross-section with diameter of 5 mm and it is made of a…

A: Given: The initial diameter of the rod is d=5 mm. The Young's modulus of material is E=120 MPa. The…

Q: a) Figure Q4 (a) shows an L-bracket ABC with diameter d which lies in the horizontal plane. It is…

Q: A mass is set on a sqaure box made of polymer. It deforms as shown in following picture. Calculate…

A: Given that, L=12 m,a=4 m,b=1 m, Since the box is square, so∠XOY=90°,

Q: t = 400 mm 250 mm 300 mm

A: given data: Px = 800 MPa; Py = 300 MPa; Pz = 500 MPa appear L=300; B=250; t=400 E = 75000 MPa…

Q: The longitudinal strain in a cylindrical bar of diameter 20mm and length 2.5m during the tensile…

Q: L₁ Rigid bar ABCD is supported by two bars as shown. There is no strain in the vertical bars before…

A: Calculate the contraction in bar (2).

Q: 2. The tires of an agricultural tractor shown below are assumed to be 25 cm wide for the front tires…

A: Given data: wF=25 cmwR=40 cmb=15 cm Need to determine the compressive stress stress in each tire.

Q: (a) the strains in these directions, (b) the changes in dimensions, (c) the volumetric strain and…

Q: If the Young's modulus and Poisson's ratio of the container material are 100 GPa and 0.3…

A: Given:Young's modulus, E=100 GPaPoisson's ratio, ϑ=0.3

Q: A rubber block with dimensions of 120x120x120 mm is compressed in a rigid mold cavity with a…

Q: A thin metal alloy plate is loaded by biaxial stress (2 directions) given by 8000 psi in the x…

Q: In a volume element with dimensions dx, dy, dz the negative y-face has a 2 MPa stress in the…

Q: block is 4 inches long in the x direction, 2 inches long in the y direction, and 3 inches long in…

Q: 3) Objects 1 and 2 are positioned as shown in the figure. Object 1 is a rigid support. For object 2,…

A: Consider a body having length L,cross-sectional area A and Young's Modulus E is heated by ΔT°C.…

Q: A rubber block with dimensions 120x120x120 mm is a rigid mold It is compressed with a vertical force…

Q: A rectangular aluminum block is 100 mm long in the x direction, 75 mm wide in the y direction and 50…

A: To Find : A single distribution loading in x(y) direction.Given : The dimension of rectangular…

Q: For the steel block (Length L = 5-meter, Width W = 1 meter, Height H = 1 meter) with compression…

Q: Part (1): A 30 ?? square plate is subjected to uniform pressure as shown in Figure.1. The 2D loading…

A: Givensquare plate a=30mmE=200GPa=200×103 MPaμ=0.3σx=80MPaσy=40MPa

Q: Let’s consider a rod having a solid circular cross-section with diameter of 6 mm and it is made of a…

Q: Let's considera rod having a solid circular cross-section with diameter of 5 mm and it is made of a…

Q: Consider a unidirectional composite lamina where the fibers are aligned at 60° from the x-axis as…

Q: Let's consider a rod having a solid circular cross-section with diameter of 5 mm and it is made of a…

A: Given:- Diameter of rod: d =5 mm Young's modulus: E=120 GPa Poisson's ratio: μ=0.33 new diameter:…

Q: A rectangular block is 7 cm long in the x-direction, 5 cm in the y-direction, and 9 cm long in the…

Q: determine the applied force F.

Q: Two hard rubber blocks with Modulus of Rigidity equal to 350 kPa are used in an anti-vibration mount…

Q: 3) A rectangular block of size 200mm x 100mm x 80mm (i.e. length x width x depth) is subjected to a…

A: l=200 mmb=100 mmd=80 mm Note that the force acts also on the opposite sides but not shown in the…

Q: A rectangular steel block is 300mm in the x direction, 200mm in the y direction and 150mm in the z…

A: Given Force. FX = 250 kN FY = 320 kN FZ = 180 kN Find Strain in X…

Q: A rectangular steel block is 3 inches long in the x direction, 2 inches long in the y direction, and…

Q: 40-mm sides glass polymer fibers composite cube is shown in Figure.1. The Glass polymer fibers…

Q: Problem2 For the beam shown in Fg2 Compute the Slope of the elastic cure at A and C, and the…

Q: A rubber block with dimensions 120x120x120 mm is a rigid mold It is compressed with a vertical force…

A: Consider the diagram shown below for the given block.

Concept explainers

Pressure Vessels

The term pressure vessel refers to a closed container that contains gas or liquid at a different pressure than environment pressure. The pressure vessels have a wide scale of applications in our day-to-day lives and other industrial places. Some common examples of pressure vessels are gas cylinders, autoclaves, compressor vessels, etc.

Question

100%

A rubber block with dimensions 120x120x120 mm is a rigid mold It is compressed with a vertical force of F = 120 kN inside the cavity.

In the rubber block,

Can you find the stress in the horizontal direction (in the x direction)?

(Note: The mold cavity is in the shape of a prismatic box. Vertical Force F is applied in the y direction. x and z directions are closed)

Rubber block,

(Elasticity modulus E = 820 MPa , Poisson ratio v=0,4)

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A cylinder filled with oil is under pressure from a piston, as shown in the figure. The diameter d of the piston is 1,80 in. and the compressive force F is 3500 lb. The maximum allowable shear stress t^^, in the wall of the cylinder is 5500 psi. What is the minimum permissible thickness t„± of the cylinder wall? (Sec figure
Solve the preceding problem for sx= 11 MPa and ??y= -20 MPa (see figure).
A circular cylindrical steel tank (see figure) contains a volatile fuel under pressure, A strain gage at point A records the longitudinal strain in the tank and transmits this information to a control room. The ultimate shear stress in the wall of the tank is 98 MPa, and a factor of safety of 2,8 is required. (a) At what value of the strain should the operators take action to reduce the pressure in the tank? (Data for the steel are modulus of elasticity E = 210 GPa and Poisson's ratio v = 0.30.) (b) What is the associated strain in the radial direction
An element in plane stress on the fuselage of an airplane (figure part a) is subjected to compressive stresses with a magnitude of 42 MPa in the horizontal direction and tensile stresses with a magnitude of 9.5 MPa in the vertical direction (sec figure part b). Also, shear stresses with a magnitude of 15.5 MPa act in the directions shown. Determine the stresses acting on an element oriented at a clockwise angle of 40g from the horizontal. Show these stresses on a sketch of an element oriented at this angle.
A standard brick (dimensions 8 in. × 4 in. × 2.5 in ) is compressed lengthwise by a force P. as shown in the figure, If the ultimate shear stress for brick is 1200 psi and the ultimate compressive stress is 3600 psi. what force Pmax is required to break the brick?
Plastic bar of diameter d = 32 mm is compressed in a testing device by a Force P = 190 N that is applied as shown in the figure. (a) Determine the normal and shear stresses acting: on all faces of stress elements oriented at (1 ) an angle 8 = 00, (2) an angle ?? = 22.5s, and (3) an angle ?? = 45°. In each case, show the stresses on a sketch of a properly oriented element. What are smaxtmax (b) Find smax and tmax in the plastic bar if a re-cantering spring of stiffness k is inserted into the testing device, as shown in the figure. The spring stillness is 1/6 of the axial stiffness of the plastic bar.
At a point on the surface of an elliptical exercise machine, the material is in biaxial stress with t = 1400 psi and trv = —900 psi, as shown in the figure part a. The figure part b shows an inclined plane aa cut through the same point in the material but oriented at an angle ft Determine the value of the angle 6 between zero and 90° such that no normal stress acts on plane aa. Sketch a stress clement having plane aa as one of its sides and show all stresses acting on the clement
A punch for making a slotted hole in ID cards is shown in the figure part a. Assume that the hole produced by the punch can be described as a rectangle (12 mm X 3 mm) with two half circles (r = 1.5 mm) on the left and the right sides. If P = 10 N and the thickness of the ID card is 1 mm, what is the average shear stress in the card?
A steel riser pipe hangs from a drill rig located offshore in deep water (see figure). (a) What is the greatest length (meters) it can have without breaking if the pipe is suspended in the air and the ultimate strength (or breaking strength) is 550 MPa? (b) If the same riser pipe hangs from a drill rig at sea, what is the greatest length? (Obtain the weight densities of steel and sea water from Table M, Appendix I. Neglect the effect of buoyant foam casings on the pipe.)
Solve the preceding problem for an element in plane stress on the bottom surface of a fuel tanker (figure part a); stresses are sx= 105 MPa, sy. = 75 MPa, and ??xy= 25 MPa. Determine the stresses acting on an element oriented at an angle ?? = 40° from the x axis, where the angle is positive when counterclockwise. Show these stresses on a sketch of an element oriented at the angle ??.
A spherical balloon is filled with a gas. The outer diameter of the balloon is 20 in. and the thickness is 0,012 in. Calculate the maximum permissible pressure in the balloon if the allowable tensile stress and the allowable shear stress in the balloon are 1 ksi and 0.3 ksi, respectively.
(a) Solve part (a) of the preceding problem if the pressure is 8.5 psi, the diameter is 10 in., the wall thickness is 0,05 in., the modulus of elasticity is 200 psi, and Poisson's ratio is 0.48. (b) If the strain must be limited to 1.01, find the maximum acceptable inflation pressure