A rectangular beam of length 702mm has a width of 132mm and a depth of 301mm. Compression steel bars are placed at a distance 98 mm from the extreme concrete compressive fiber. The beam supports service dead loads of dead load (16 KN/m) and live load (24 KN/m). Reinforced with 4 25mm tension steel bars and 4 12mm tension steel bars f′c = 42 MPa fy = 519 MPa 1. Solve for the height of the neutral axis measured from the extreme compression fiber. 2. Solve for the design moment. 3. Solve for the strength reduction factor.

A rectangular beam of length 702mm has a width of 132mm and a depth of 301mm. Compression steel bars are placed at a distance 98 mm from the extreme concrete compressive fiber. The beam supports service dead loads of dead load (16 KN/m) and live load (24 KN/m). Reinforced with 4 25mm tension steel bars and 4 12mm tension steel bars f′c = 42 MPa fy = 519 MPa 1. Solve for the height of the neutral axis measured from the extreme compression fiber. 2. Solve for the design moment. 3. Solve for the strength reduction factor.

Steel Design (Activate Learning with these NEW titles from Engineering!)

6th Edition

ISBN:9781337094740

Author:Segui, William T.

Publisher:Segui, William T.

Chapter9: Composite Construction

Section: Chapter Questions

Problem 9.1.3P

See similar textbooks

Related questions

Q: ly supported beam is reinforced with 4-28mmφ at the bottom and 2-28mmφ at the top of the beam. Steel…

A: Given:- bottom reinforcement-4-28mm dia top reinforcement=2-28mm dia steel covering =70mm total…

Q: A 3-m long steel column of hollow circular cross-section is supported on a steel base plate and a…

Q: A 380mmx520mm beam is reinforced with 5 diameter 28mm steel bars (one layer). Strength of concrete…

Q: 2. A distributed load of W N/m is applied over the entire length of a simply supported beam 4m long.…

Q: A simply supported beam 300mm x 500mm has a span of 5m. The beam is reinforced with unbonded…

A: simply supported beam : A simply supported beam is one that is supported by only two points and can…

Q: Dead Load, D.L= 7 kN/m Live Load, L.L = 4.3 kN/m The allowable compressive stress of the concrete,…

Q: A rectangular beam has a width of 283mm and an effective depth of 461mm. It is reinforced with…

Q: determine the maximum and concrete and steel stresses at the point of maximum positive and negative…

A: Maximum bending stress The top surface of the die experiences the most bending stress, which…

Q: A reinforce d rectangular beam with width b and effetive depth d has 4.16 mm bars placed on 1layer…

A: Given: b = 532.5mm, d = 877.5mm fy = 420 MPa, fck = 28 MPa L = 6.35 m WD = 36 kN/m, WL = 47.5 kN/m…

Q: A simply supported beam carries a uniformly supported load. It has a span of 8.6 m and an effective…

A: d = 670 mmb = 410 mmL = 8.6 mRebars 6-28 mmStirrups = 12 mmfc = 29.3 MPafy = 414.5 MPaClear cover =…

Q: The concrete post is reinforced axially with four symmetrically placed steel bars, each of…

A: We have to find stress in each material when the 1000 KN axial load is applied. The modulli of…

Q: A concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The…

Q: Nominal moment capacity of the overhanging portion of the section. b. Depth of the compression…

A: Solution: Givendata flange width = 750 mm thickness of flange = 50mm Effective depth = 750 mm width…

Q: 5- A beam is reinforced with Ø16 mm bars and Ø10@200 mm stirrups. If the concrete cover is 40 mm, f,…

A: Given: Diameter of reinforced bars= 16 mm Diameter of stirrups = 10 mm Spacing of stirrups= 200 mm…

Q: The reinforced concrete beam is made using two steel reinforcing rods. Figure 1 of 1 Part A If the…

A: Given that :

Q: A simply supported concrete beam 6m long is reinforce with four-28 mm diamgram tension bars. The…

A: L= 6 mTension bars = 4-28 mm diaCompression bars= 2-28 mm diaSteel covering = 70 mmf'c= 30 Mpafy=…

Q: A rectangular concrete beam has a width of 350 mm and an effective depth of 600 mm. The beam is…

A: Given data:- Width of beam w = 350 mm Effective depth d =600 mm Clear depth d'=60 mm Total depth…

Q: The beam shown has the following properties: concrete cover=40mm, ds= 10mm, f'c=21 MPa, and fy=280…

Q: In the reinforced beam having a width of 300mm and an effective depth of 600 mm, caries a moment of…

A: Answer We are given Beam width b = 300 mm effective depth d = 600 mm Neutral axis depth from top c…

Q: rectangular cantilever beam has a width of 300mm and an effective depth of 480mm. It is reinforced…

Q: A reinforced concrete beam is 250 mm wide with an effective depth of 400 mm. Use f'c= 21 MPa and fy…

A: width, b = 250 mm depth, d = 400 mm fc = 21 MPa fy = 275 MPa reinforcement, 4-25 mm bars

Q: A rectangular cantilever beam has a width of 300mm and an effective depth of 480mm. It is reinforced…

Q: Check the adequacy of the isolated T-beam shown below according to ACI Code requirements and…

Q: A concrete beam of length 5.5m is built monolithically with the slab. Originally, the beam has a…

A: Length of the beam = 5.5 mClear span from adjacent beam = 2.15 mWidth of the beam(web), bw = 300…

Q: concrete floor slab 100 mm thick is cast monolithic with concrete beams 2.0 m on centers. The beams…

Q: A 62.6-kN vertical load P is applied at the corner of the square cross section of the steel…

Q: Consider the loads of the figure to be axially applied at sections B, C, and D to the concrete…

Q: A reinforced concrete rectangular beam with 250 mm in width has an effective depth of 500 mm. It is…

Q: A square hollow steel structure with a wall thickness of t1 = 10 mm is pin linked to two gusset…

Q: m AB. The cross-sectional area of the bar is 580 mm2. If the stress in the

Q: A column ABC is constructed with uniform hollow circular section as shown below. The roof load at…

Q: Design a rectangular beam to carry a live load of 1.5 kips/ft amd a dead load of 1.5 kips/ft, in…

A: Given Data Live load= 1.5 Kips/ft Dead Load= 1.5 Kips/ft Span length= 32 ft F'c= 4000 psi Fy= 60000…

Q: Situation 2: A square hollow steel strut of thickness 10 mm is pin connected to two connector plates…

Concept explainers

Design criteria for structural loading

The different loads such as loads due to self-weight (dead load) and external loads such as live load, wind loads, seismic load, snow load, and other loads and load combinations that influence the design of a building are called structural loading. The nature of the applied load differs from changes in the location, design, and type of materials used. The design criteria require that structures must be designed and constructed to be able to withstand all load types that are expected to act upon the structure and render its usage for the designated purpose. The structural members such as beams, slabs, columns, and foundations help the structure to withstand the applied load. There are different institutes such as ASCE and ACI that provide building design codes to assure minimum safety requirements and quality of the structures.

Question

f′c = 42 MPa
fy = 519 MPa

1. Solve for the height of the neutral axis measured from the extreme compression fiber.
2. Solve for the design moment.
3. Solve for the strength reduction factor.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Step by step

Solved in 4 steps with 5 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

A T-section has a flange width of 750 mm, thickness of flange is 50mm. Effective depth is 750 mm with a width of web section of 350 mm. The beam is subjected to a factored moment ??=816 kN-m, concrete has a strength of 21 MPa and that the yield stress of the steel is 277 MPa. Determine the following:a. Nominal moment capacity of the overhanging portion of the section.b. Depth of the compression blockc. Area of reinforcemen
A 3-m long steel column of hollow circular cross-section is supported on a steel base plate and a concrete pedestal. Column ends are hinged and sidesway is prevented.the outside diameter of the column is 260 mm, allowable compressive stress is 55 MPa and the allowable concrete bearing stress is 10 Mpa.40. Compute the required thickness of the column tio support axial load of 800 Kn.A. 18 mm B. 19 mm C.20 mm D. 10mm41. Compute for the minimum required diameter of the base plate.A. 300 mm B. 320 mm C.350 mm D. 280 mm42. If the thickness of column is 10mm, find the critical slenderness ratio.A. 33.914 B. 45.871 C.87.876 D. 23.811
The beam shown has the following properties: concrete cover=40mm, ds= 10mm, f'c=21 MPa, and fy=280 MPa. Determine the ultimate moment capacity of the beam in kN-m. Determine also the type of failure and the beam condition (under-reinforced, over-reinforced or balanced condition) 250mm 5-ø16mm h =450mm 50mm
3
A rectangular cantilever beam has a width of 300mm and an effective depth of 480mm. It is reinforced with 7-25mm bars. The beam is carrying a uniformly distributed dead load of 15kN/m. The compressive strength of the concrete is 21MPa and the yield strength of the steel is 415MPa. The nominal moment capacity multiplied by its strength reduction factor is 377kN.m. Determine the allowable concentrated live load in kN that it could carry acting at 2.25m from the support if the length of the beam is 2.57m. Note that the dead load includes the weight of the beam.
Situation 2: A square hollow steel strut of thickness 10 mm is pin connected to two connector plates of thickness, 12 mm. The connector plates are welded to the base plate of thickness, 12mm. The base plate is fastened to the concrete base by 4-16 mm diameter anchor bolts. The diameter of the pin is 16 mm. 48 kN 4. Which of the following most nearly gives the bearing stress between the strut and the pin? a. 150 MPa steel strut c. 120 MPa b. 140 МPа d. 125 MPa 30 5. Which of the following most nearly gives the shearing stress in the pin? c. 103.37 MPa d. 119.37 MPa a. 110.46 MPa ь. 126 39 МPа base 6. Which of the following most nearly gives the shearing stress in the anchor bolts? c. 51.69 MPa d. 47.16 MPa plate a. 55.04 MPa b. 59.68 MPa connector plate anchor bolt
H.W No.1: The concrete I-beam of figure is pretensioned with four bounded stranded cables having total area (371 mm²). Eccentricity of the steel varies parabolically from 0 at the support to 193 mm at the center of 9 m span. The effective stress in steel after losses is 910 MPa. 254 mm 102 mm 76 mm 102 mm 193 mm 9 m a-what superimposed load will produce a balanced condition of external equivalent prestress load, such that uniform axial compression will be obtained in the concrete. b-what superimposed uniform distributed load will produce cracking of the beam, given the modulus of rupture f=3.28 MPa. c-compute the flexural strength of the beam and compare with the cracking moment. Use: fe = 27.6 MPa, fpy= 1469 MPa, fpu= 1724 MPa. Aps fps a= 0.85 feb --) M₁ = Aps fps (dp- Mn Mn = Pp fps bdp² (1 -0.59 x P x Ips) fci Apf = 0.85 f (b-bw)h fps Apw = 0.85 bw a fps a= Apwfps 0.85 fobw
A reinforced concrete beam is 250 mm wide with an effective depth of 400 mm. Use f'c= 21 MPa and fy = 275 MPa. The section is reinforced with 4 - $25mm bars. U = 1.2D + 1.6L. a. Compute for the nominal flexural strength. b. Calculate the design flexural strength of the section. c. Calculate the safe service live load moment if the service moment from total dead load is 96 kN-m. d. If the beam is 5m long with a moment from total dead load of 96 kN-m, find the maximum moving concentrated service live load that can be supported by the beam.
10 mm | | | | 10 mm 50 mm ارت - 50 mm 10 mm 20 kN B 150 mm 910 mm 10 kN D ------- 150 mm Two vertical forces are applied to a am of the cross section sh vn. Determine the maximum tensile and compressive stresses in portion BC of the beam.Show your complete solution and box your answer.
The simply supported I-beam shown in cross-section and elevation is to carry a uniform service live load totalling 8 kN/m over 12m span, in addition to its own weight. The beam will be pretensioned using multiple seven-wire strands, eccentricity is 130mm and constant. The 28-day compressive strength of concrete is 40 Mpa. Calculate deflections
A concrete beam of length 5.5m is built monolithically with the slab. Originally, the beam has a width of 300mm and effective depth of 400mm. If the flange of the slab is 150mm and the total area tension steel bars is 500 sq.cm., determine the design capacity of the beam structure. The concrete has a compressive strength of 25 MPa, steels' yield strength is 420 MPa. and the beam's clear span from its adjacent beams is 2.15m.
A rectangular beam has a width of 283mm and an effective depth of 461mm. It is reinforced with 4-25mm bars. The compressive strength of the concrete is 28MPa and the yield strength of the steel is 285MPa. The ultimate moment capacity is ___kN.m.