Answered: A pn junction diode and a Schottky… | bartleby

Related questions

Question

A pn junction diode and a Schottky diode have equal cross-sectional areas and have forward-bias currents of 0.5 mA. The reverse-saturation current of the Schottky diode is The difference in forward-bias voltages between the two diodes is 0.30 V. Determine the reverse-saturation current of the pn junction diode.

Expert Solution

Trending now

This is a popular solution!

Step by step

Solved in 3 steps with 3 images

SEE SOLUTION Check out a sample Q&A here

Blurred answer

Similar questions

Please do D, E, and F
True or false? If false, correct the statement: a. In an p+-n- junction diode (NA >> ND), nearly all depletion is in the n-type region, and the peak electric field at the junction is almost independent of NA. b. The forward current of a p-n junction diode is dominated by the diffusion and recombination of majority carriers. c. In a Schottky barrier diode, there are two types of capacitances, i.e., the depletion capacitance and diffusion capacitance. d. In a Schottky contact, the energy barrier seen by electrons in the metal is always the Schottky barrier height, regardless of the applied bias across the metal and semiconductor. e. Usually the reverse current of a p-n junction diode is more sensitive to temperature as compared to that of a Schottky barrier diode. f. In a MOS structure with p-type semiconductor, if the semiconductor work function is much smaller than the metal work function, the MOS structure will produce an inversion layer after reaching the thermal equilibrium.…
Consider a p+ -n Si diode with NA = 1018 cm-3 and ND = 1016 cm-3. The hole diffusion coefficient in the n-side is 10 cm2/s and carrier lifetime τp=10-7s. The device area is 10-4 cm2. Calculate the reverse saturation current and the forward current at a forward bias of 0.7 V at 300 K.
A power diode used in a cell phone tower power supply dissipating power during the conductionprocess requires its junction temperature on not to exceed 180 degrees C. The power diode data sheet givesconduction-state voltage drop of 1.8V and for the DO-4 diode case, the junction-to-case thermal resistance, R-theta , jcis 0.8 degrees C/W. The diode is mounted over a heat sink having thermal resistances, case-to-sink R-theta,cs = 0.3degrees C/W and sink-to-ambient R-theta, sa= 0.6degrees C/W. Calculate the maximum current that diode can withstand safely without overheating if theambient temperature is 30 degrees C. Calculate the difference of temperature from case to sink. If the design requires to limit the junction temperature to 150 degrees C, select a value of R-theta,sa for aheat sink which should be used.