A mixed liquor sample form an activated sludge plant was settled in a one-litre measuring cylinder for 30 minutes after which time, a volume of 350 m/ of sludge was recorded. When 50 m/ of the mixed liquor were filtered through a GFC paper for the determination of MLSS the gain in weight of the paper was 0.1375 g. Determine the SVI.

A mixed liquor sample form an activated sludge plant was settled in a one-litre measuring cylinder for 30 minutes after which time, a volume of 350 m/ of sludge was recorded. When 50 m/ of the mixed liquor were filtered through a GFC paper for the determination of MLSS the gain in weight of the paper was 0.1375 g. Determine the SVI.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Q2: A column analysis for an activated sludge suspension yielded the following: MLSS Conc (mg/l) Settling velocity m/h 1000 2.8 2000 3000 1.2 0.4 4000 0.2 5000 Question 0.1 6000 0.06 The influent MLSS concentration is 2000 mg/l and the flow rate is 4200 m³/d. Determine the size of the clarifier that will thicken the solids to 8000 mg/l.
A given sludge with 98% moisture content is X times more bulky than with 95% moisture content. The value of X is ______
Water quality and characteristics discuss: 1. Organoleptic parameters 2. Nitrate 3. Solids
The test Carried aut en an follow. detaits sludge Somple are Weight of Dish =9.52gm Baw Sludge Sempla and duch =23 27ga Aşter Drying Clnstent) After Burning Clnstant) = 6.38gm 9.46gm %3D %3D Calculkt th percentage of total Salidl ad lloldi Solid in t cboue of cowego.
Settling test on a sample drawn from Aeration tank liquor of ASP (MLSS 2800 mg/L) was carried out with 1 litre sample. The test yielded a settled volume of 200 mL. The value of sludge 7.19 %3D volume index shall be
An anaerobic digester is operated with a hydraulic retention time (HRT) of 25 d and a flow rate of 0.85 m³/d. The influent substrate concentration is 18 g/L and the digestion process is assumed to follow first order kinetics with a Ko value of 0.09 d'¹. Calculate: (a) the liquid volume of the anaerobic digester, V (m³) (b) the effluent substrate concentration, So (g/L)
In an activated sludge treatment unit with tank volume of 700 m³, the imfluent BOD of the sludge at 4000 m³/day of discharge is 250 mg/lt which reduced to 30 mg/lt in the effluent sludge. The MLVSS concentration in the aeration tank is 3000 mg/lt. The F/M ratio is kg/kg/day.
Two wastewater streams A and B, having an identical ultimate BOD are getting mixed to form the stream C. The temperature of the stream A is 20 °C and the temperature of the stream C is 10 °C. It is given that • The 5-day BOD of the stream A measured at 20 °C=50 mg/l • BOD rate constant (base 10) at 20 °C-0.115 per day Temperature coefficient = 1.135 The 5-day BOD (in mg/l, up to one decimal place) of the stream C, calculated at 10 °C, is ●
I want the solution in less than 15 minutes
1
The following data on the substrate removal rate and the substrate concentration is available for wastewater treatment (S) mol Rate, r (mol/min) 0.04 0.57 0.06 1.05 0.8 2.32 0.10 3.00 0.12 4.68 0.14 5.42 2.0 5.78 Estimate the value of substrate removal constant Km and the value of Vmax
Q-The MLSS concentration in an aeration tank is 2000 mg/l and the sludge volume after 30 minutes of setting in a 1000 ml graduated cylinder is 175 ml. Find the value of sludge density index (SDI).