A heat conducting rod, 0.90 m long, is made of an aluminum section that is 0.10 m long, and a copper section that is 0.80 m long. Both sections have cross- sectional areas of 0.00040 m2 .The aluminum end is maintained at a temperature of 40° C and the copper end is at 150° C. The thermal conductivity of aluminum is 205 W/m · K and of copper is 385 W/m · K. Steady state has been reached, and no heat is lost through the well-insulated sides of the rod. The temperature of the aluminum-copper junction in the rod is closest to

A heat conducting rod, 0.90 m long, is made of an aluminum section that is 0.10 m long, and a copper section that is 0.80 m long. Both sections have cross- sectional areas of 0.00040 m2 .The aluminum end is maintained at a temperature of 40° C and the copper end is at 150° C. The thermal conductivity of aluminum is 205 W/m · K and of copper is 385 W/m · K. Steady state has been reached, and no heat is lost through the well-insulated sides of the rod. The temperature of the aluminum-copper junction in the rod is closest to

College Physics

11th Edition

ISBN:9781305952300

Author:Raymond A. Serway, Chris Vuille

Publisher:Raymond A. Serway, Chris Vuille

Chapter1: Units, Trigonometry. And Vectors

Section: Chapter Questions

Problem 1CQ: Estimate the order of magnitude of the length, in meters, of each of the following; (a) a mouse, (b)...

See similar textbooks

Similar questions

The thermal conductivity of a sheet of rigid, extruded insulation is reported to be k = 0.029 W/mK. The measured temperature difference across a 20-mm-thick sheet of the material is T₁ T₂ = 10°C. - (a) What is the heat flux through a 2 m x 2 m sheet of the insulation? (b) What is the rate of heat transfer through the sheet of insulation?
It is desired to just able to slip the 16.0 mm diameter glass marble through an aluminum washer. At 68.0 F, the inner diameter of the washer is 15.98 mm. To what temperature in Fahrenheit should the aluminum washer be heated for the marble just able to slip through. The marble remains at 68.0 F. aluminum = 2.3x10-50 C-1; and glass = 2.7x10-50 C-1. [Answer in 3 significant figures]
A 65.21 gram copper metal is heated to 130°C and dropped into 119.76 gram of water at an initial temperature of Tw. When equilibrium is reached the temperature of copper-water mixture is 26.3°C. Calculate the initial temperature of water? If the specific heat of copper is 385 J/kg°C and Specific heat of water is 4186 J/kg°C. Initial temperature of water in (°C) =
(a) A 1.8 cm thick wooden floor covers a 4.0 m × 5.5 m room. The subfloor is at a temperature of 16.2 ˚C, while the air in the room is at 19.6 ˚C. What is the rate of heat conduction through the floor? The thermal conductivity for wood is 0.2 W / (m K) (b) Seals can cool themselves by using thermal windows, spots on their bodies with a much higher than average surface temperature. Suppose a seal has a thermal window of 0.030m2 at a temperature of 30˚C. If the seal's environment is frosted at -10˚C, what is the net rate of radiation energy loss? Assume an emissivity equal to 0.97. (please show steps, explanation and formulas)
A brass ring has an inner diameter exactly 4.000 cm and outer diameter exactly 4.050 cm at 20⁰C. It is to be fitted over an Aluminum rod of diameter exactly 4.004 cm. To what temperature must the aluminum rod be cooled down to, so that the ring just fits over it? Thermal expansion coefficients: Aluminum = 24.0 x 10-6 /ºC: Brass = 19.0 x 10-6 /ºC. details explanation, please
Block A rests on a horizontal tabletop. A light horizontal rope is attached to it and passes over a pulley, and block B is suspended from the free end of the rope. The light rope that connects the two blocks does not slip over the surface of thè pulley (radius 0.080 m) because the pulley rotates on a frictionless axle. The horizontal surface on which block A (mass 3.70 kg) moves is frictionless. The system is released from rest, and block B (mass 6.00 kg) moves Part A What is the tension force that the rope exerts on block B? downward 1.80 m in 2.00 s. Express your answer with the appropriate units. HÁ TB = Value Units Submit Request Answer Part B What is the tension force that the rope exerts on block A? Express your answer with the appropriate units. HẢ 王新 TA= Value Units
The world's most active volcanoes, such as the Kilauea volcano in Hawaii, can disgorge about 5.00 X 105 m3 of 1100°C lava per day. What is the rate of heat transfer (in MW) out of the earth by convection, if this lava has a density of 2800 kg/m3 and eventually cools to 25°C? Assume that the specific heat of lava is the same as that of granite.
A 1.82 m wide by 1.11 m high metal plate must be insulated to prevent contact burn injuries. If the heat transfer rate is 136 W and the temperature across the insulation must be reduced from 87.3°C to 40.3°C, what is the minimum thickness (in cm) of insulation required [round your final answer to two decimal places]? {kins = 0.031 W/m∙K}
A copper rod is 0.867 m long with a rectangular cross section of dimensions 0.0423 m by 0.0729 m. The ends of the rod are held at 50.3 ∘C and 97.1 ∘C, but the rod is otherwise insulated from its environment. Find the heat current (the amount of heat that flows per unit time) through the rod. The thermal conductivity of copper is 385 W/(m⋅K).
Thank u! A copper rod has one end in ice at a temperature of O°C, the other in boiling water. The length and diameter of the rod are 1.80 m and 3.90 cm, respectively. At what rate in grams per hour does the ice melt? Assume no heat flows out the sides of the rod. Thermal conductivity of copper is 401 W/(m-K). Latent heat of fusion for water, Lf= 333.7 J/g. Water boils at 100°C
Rods of copper, brass, and steel are welded together to form a Y-shaped figure. The cross-sectional area of each rod is 2cm?. The free end of the copper rod is maintained at 100°C and the free ends of the brass and steel rods at 0°C. Assume there is no heat loss from the surfaces of the rods. The lengths of the rods are: copper: 13cm, brass: 18cm, steel: 24cm. (a) what is the temperature of the junction point? (b) What is the heat current in each of the three rods?
A plate (74 + 0.3) m long and (74 + 0.1) m wide, with a thickness of (74 + 12) mm is made from stainless steel ( k= 16 W/mK). The temperature at the bottom surface of the plate is 100 °? maintained by an electrical heater supplied by 200 V and 0.25 A. In a steady-state condition, assuming that the plate is perfectly insulated on all sides except top surface, find temperature at the top surface of the plate.