A coupling must transmit 30 hp at a speed of 175 r/min. 3/8 inch diameter bolts are arranged in a single 6 inch diameter circle. The shear stress in the bolts should not exceed 5,000 psi. What is the minimum number of bolts that should be used

Q: (Please input the FBD together with the answer) A flanged bolt coupling consists of nine-in diameter…

A: The torque capacity of the flange coupling is 5522.33 lb•ft.

Q: 37. What factor of safety is needed for a 1.998 in diameter shaft with an ultimate * strength of…

A:

Q: One shaft is in torsion as shown below. If the magnitude of shear stress at point A is 289.5 MPa,…

A: Given data: Shear stress at point A = SA = 269.5 MPa Radius of point A = rA = 40 mm = 0.04 m Shear…

Q: The solid spindle AB is made of a steel with an allowable shearing stress of 12 ksi, and sleeve CD…

A: The solid spindle AB is made of a steel with an allowable shearing stress of 12 ksiThe sleeve CD is…

Q: The bearing pad consists of a 150 mm by 150 mm block of aluminum that supports a compressive load of…

A: Given:A=150 mm x 150 mmP=6 KNθ=30°

Q: A 3/8-inch diameter bolt is subjected to a 2,135-lb tensile load. The bolt passes through a very…

A:

Q: A motor transmits 40 hp to an air conditioning apparatus by means of a roller chain. The motor runs…

A: If you have any doubts feel free to ask.... Thankyou

Q: A flange coupling connects two shafts in order to transmit 250 kW at 100 rpm. It uses 6 bolts with a…

A: The flange thickness is 20 mm. Hence, option (B) is correct.

Q: 150 18 F = 25 KN 25 200 25 25 $ -25 100- 25 50 ↑ Calculate the maximum combined stress in the throat…

A: To Find : The maximum combined stress in the throat Given : The load is The free body diagram is,

Q: determine the diameter of the chain driven power transmitting steel shaft to transmit 200 hp to 400…

A:

Q: Use the graphical method to construct the shear-force diagram and identify the magnitude of the…

A:

Q: A motor supplies 173 hp at 650 rpm to flange A of the shaft. Gear B transfers 75 hp of power to…

A:

Q: 10/10 find the shear stress in bolt in pin A 60 kN 4 M 3 BOLT DIA 20 MM A 50 kN PIN A アナナ 2 M

A:

Q: Onv Problems 9-29 to 9-32 F 9-29 to 9-32 A steel bar of thickness h is welded to a vertical support…

A:

Clutches, Brakes, Couplings, and Flywheels

The clutch is described as a machine element used to connect or disconnect two shafts together to transmit torque or power. The clutch works on the principles of friction. The clutch is commonly used in automobiles to transfer power from the driving shaft to the driven shaft.