A flange coupling connects two shafts in order to transmit 250 kW at 100 rpm. It uses 6 bolts with a diameter of 20 mm located at a 210 mm bolt circle diameter. Determine the flange thickness if the bearing stress on the flange is 95 MPa. A. 10 mm B. 20 mm C. 25 mm D. 30 mm

Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 39.00 N-m 37.00…

A:

Q: he shaft, shown below, consists of rods AB and CD and a tubular segment BC. The rods are onnected…

A: Turning operation is the manufacturing technique that is done on a lathe machine. In this operation,…

Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3). 36.00 N-m 28.00…

A:

Q: The shaft ABCDE is under equilibrium. Determine the internal torque in section (3).

A: Given data, TE = Torque at E = -11 N-m (Cross-section is twisted in clockwise direction from right…

Q: bartleby.com/questions-an 3 QSEARCH ASK CHAT VX MATH SOLV A double square thread power screw is to…

A:

Q: Two 38.1 mm shafts are connected by a flanged coupling. The flanges are fitted with 6 bolts SAE 1020…

A: flanged coupling d=38.1mmn=6D=152.4mmN=260 rpmT=850000 Nm  =850000 ×103 Nmmfs=5Sult=430MPaSsy=330…

Q: A holding fixture for a workpiece 37.5 mm thick at the clamp locations is being designed. The detail…

A:

Q: Two # 10-24 screws are used to mount the hook in the ceiling as shown. The screws are tightened so…

A: Given :   Number of screws (n) =2 Size of the screws : #10 - 24  , which means d=316in and Thread…

Q: One flange is attached to four 5x8 grade and M16 bolt connections with a total preload force of…

A: Write the diameter of the M16 bolt.   D=16 mm=16 mm×1 m1000 mm=0.016 m   Write the developed…

Q: Is the frame determinate or indeterminate? Support your answer.

A: According to the given dataA frame is provided. We need to findthe frame is the frame determinate or…

Q: A cylinder with a nominal 45 mm ID, a 60 mm OD, and a 30 mm length is to be mated with a solid shaft…

A: Cylinder nominal diameter, Length of the shaft Yield stress, Young's modulus, Coefficient of…

Q: . A self-locking C-clamp is used to hold a workpiece with a clamping force of 5000 lb. The screw has…

A: Draw FBD

Q: Q.1 Design a compression coupling for a shaft to transmit 2000 N-m. The allowable shear stress for…

A: Answer: Given, T = 2000Nam = 2000 x 103 N - mm         τ= 50 MPa  σ t = 90MPa   No ,of bohts , N = 6…

Q: d Given: 9/8 in Diameter of bolt = 7/8 inch V2 in Diameter at the root of the thread (bolt) = 0.731…

A:

Q: A flanged bolt coupling consists of eight – 10mm diameter steel bolts on a bolt circle 500mm in…

A:

Q: 12 mm Determine the following: a. Shearing Stress in the head bolt. b. Shearing in the thread c. The…

A:

Q: A set of five SAE Grade 2 bolts are installed to provide a clamping force of 20000 lb between two…

A: Write the given data. Type of bolt=SAE grade 2F=20000 lbn=5σ=0.75σproof

Q: A bronze strip is securely fixed to a side of a steel strip of the same thickness, width and length.…

A:

Q: Identify the flange thickness (in mm) of a flange coupling having 6 bolts, that is 10-mm in…

A: Write the expression of torque transmitted to the flange. Tflange=nd1tfσcfD12      ......…

Q: 10. A 100 mm steel shaft develops a 3.75 kN - m torque and using a square key to fasten a 250 mm…

A: Diameter of the shaft, (d)= 100 mm Torque on the shaft, (T)= 3.75 kN .m= 3750000 N .mm The diameter…

Q: A coupling with material AISI C1045 as rolled transmits 65.5 HP at 1750 rpm. The material of the…

A:

Q: What weight (kg) can be lifted by a double threaded screw that has an efficiency of 85% if it is…

A: Given, No. of threads in one lead = n =2 (For double threaded screw)Efficiency = η = 0.85Applied…

Q: Design and draw a protective type of cast iror flange coupling for a steel shaft transmitting ? kW…

A: Machine Design

Q: 1- Name the different forms of journal bearings. 2- Sketch with freehand and name the different…

A:

Q: When a shaft is supported using a radial bearing, it can support the load acting along the axis of…

A: Radial bearing :- It is bearing which can support Only Radial Load. It cant support any thrust…

Q: Q1. Design and draw a protective type of cast iron flange coupling for a steel shaft transmitting 28…

A:

Q: PROBLEM 4 1/ A 10 5! 21c B √³5' C P 10: D. S'E 10 5' LL. F

A: what are the forces in the members? (with using method of sections or method of joints.)

Q: For nos. 24-37, satisfy the conditions of the g below: The truss is loaded as shown in figure of…

A: Ans: 25. Option D is correct. 11.2 kN compression

Clutches, Brakes, Couplings, and Flywheels

The clutch is described as a machine element used to connect or disconnect two shafts together to transmit torque or power. The clutch works on the principles of friction. The clutch is commonly used in automobiles to transfer power from the driving shaft to the driven shaft.