3. Steam at 320°C flows in a stainless-steel pipe (k = 15 W/m °C) whose inner and outer diameters are 5 cm and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k = 0.038 W/m-°C). Heat is lost to the surroundings at 5 °C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of 15 W/m².°C. Taking the heat transfer coefficient inside the pipe to be 80 W/m².°C, determine the rate of heat loss from the steam per unit length of the pipe. Also determine the temperature drops across the pipe shell and the insulation.

3. Steam at 320°C flows in a stainless-steel pipe (k = 15 W/m °C) whose inner and outer diameters are 5 cm and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k = 0.038 W/m-°C). Heat is lost to the surroundings at 5 °C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of 15 W/m².°C. Taking the heat transfer coefficient inside the pipe to be 80 W/m².°C, determine the rate of heat loss from the steam per unit length of the pipe. Also determine the temperature drops across the pipe shell and the insulation.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

700 W/m3 electrical heat is generated in a large plane wall whose one side is insulated while the other side is subjected to convection. The thermal conductivity of the wall is (k W/m.K) and the convection heat transfer coefficient is (h = 17 W/m?K). Determine the location and the value for the maximum temperature and the minimum temperature in the plate for steady one-dimensional heat transfer. Assume T. = 25°C. A=1 m?; L= 25 cm). = 20
H.W1 Consider a person standing in a room. Determine the total rate of heat transfer from this person if the exposed surface area and temperature are 1.6m² and 29°C, respectively. Assume that the convection heat transfer coefficient is 6W/m².K and the emissivity of a person is 0.95. The air temperature in the room is maintained at 22°C at all times of the year. In summer, the wall and ceiling temperatures are observed to be 25°C, while in winter, they are 10°C. Ans: Qrotal =104.4 W In Summer Qrotal =231.3 W In Winter
Q2/ Consider a 1.2-m-high and 2-m-wide glass window whose thickness is 6 mm and thermal conductivity is k = 0.78 W/m. °C. Determine the steady rate of heat transfer through this glass window and the temperature of its inner surface for a day during which the room is maintained at 24°C while the temperature of the outdoors is 5°C. Take the convection heat transfer coefficients on the inner and outer surfaces of the window to be h1 = 10 W/m2 °C and h2= 25 W/m2 °C, and disregard any heat transfer by radiation.
Steam at To1= 320°C flows through a cast iron pipe (k = 80 W/mK) with inner and outer diameters of D1= 5cm and D2 = 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation with k = 0.05 W/mk(Figure Q2). Heat is lost to the surroundings (To2 = 5°C) by natural convection and radiation, with a combinedheat transfer coefficient of h2 = 18 W/m2.K.(a) Taking the heat transfer coefficient inside the pipe to be h1 = 60 W/m2 K, Calculate the rate of heat lossfrom steam per unit length of pipe.(b) Calculate the temperature differences between the pipe shell and the insulation. Someone comments that a microwave oven can be viewed as a conventional oven with zero convectionresistance at the surface of the food. Is this a correct statement? Discuss the reason.
3 Brass cube "p = 8530 kg/m , c= side length =9 mm, are annealed by heating them first to 813°C in a furnace and then allowing them to cool slowly to 130°C in ambient air at 28°C. If the average heat transfer coefficient is 19.9 W/m .°C, If 2204 balls are to be annealed per hour, what is the total rate of heat transfer (watts) from the balls to the ambient air? 380 J/kg.°C, k = 110 W/m.°C, a = 33.9E-6 W/m.°C",
Steaks (2 cm thick, k = 0.45 W/m - °C, « = 0.91 x 107 m2/s) usually have an original temperature of 25 °C. They will be cooled in a refrigeration room. The said room has a temperature of -11 °C. The heat transfer coefficient on both sides of the steak is 9 W/m2 - °C. How long will it take for both surfaces of the meat to be cooled to 2 °C? Assume the geometry of steaks to be a flat slab.
The convection coefficient for a hot a fluid flowing over a cool surface is 150 W/m^2. The fluid temperature is 410 K and the surface is held at 290 K. Determine the heat transfer per unit surface area from the fluid to the surface.
. Consider a large plane wall of thickness L = 0.4 m, thermal conductivity k = 2.3 W/m °C, and surface area A = 20 m². The left side of the wall is maintained at a constant tem- perature of T₁ = 80°C while the right side loses heat by con- vection to the surrounding air at T = 15°C with a heat transfer coefficient of h = 24 W/m². °C. Assuming constant thermal conductivity and no heat generation in the wall, (a) express the differential equation and the boundary conditions for steady one-dimensional heat conduction through the wall, (b) obtain a relation for the variation of temperature in the wall by solving the differential equation, and (c) evaluate the rate of heat trans- fer through the wall. Answer: (c) 6030 W
Steam at 280° C flows in a stainless steel pipe (k = 15 W/m⋅K) whose inner and outer diameters are 5 cm and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k = 0.038 W/m⋅K). Heat is lost to the surroundings at 5° C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of 22 W/ m2⋅K.Taking the heat transfer coefficient inside the pipe to be 80 W/ m2⋅K.Determine the rate of heat loss from the steam per unit length of the pipe and Determine the temperature decrease between the inner pipe surface and the outer insulation surface.
A pipe in a manufacturing plant is transporting superheated vapor at a mass flow rate of 0.3 kg/s. The pipe is 10 m long, has an inner diameter of 5 cm and pipe wall thickness of 6 mm. The pipe has a thermal conductivity of 17 W/m.K, and the inner pipe surface is at a uniform temperature of 120 °C. The temperature drop between the inlet and the exit of the pipe is 7 °C, and the constant pressure specific heat of vapor is 2190 J/kg.°C. If the air temperature in the manufacturing plant is 25°C, determine the heat transfer coefficient as a result if convection between the outer pipe surface and the surrounding air. T(r) = 120°C Superheated Air, 25°C r2 vapor r1 0.3 kg/s L = 10 m Tin-Tout = 7°C
Heat Transfer A wall of an oven with a wire in it. Across the wire a voltage of 50 Volts and a current of 2 Amps is applied, and 80% of the electrical power is converted to thermal energy. The oven is a convection oven and has air flowing through it at 240 C and h = 10 W/m^2 K. The wall of the oven is 0.1 m thick and 1.5 m tall and 1.5 m wide and is made of steel (k = 15 W/m K). Find the surface energy balance on the inner wall of the oven and determine the temperature of the ineer wall at steady state. Then do an energy balance on the outer wall, assume that the oven is free standing and has an emissivity, e = 0.6, and the surrounding temperature is 25 C. The air in the surrounding has a convective heat transfer coefficient of 25 W/m^2 K. Just set up the balance equation that would enable to solve, no need to actually solve.
The temperature of a gas stream is measured by a thermocouple whose junction can be approximated as a 1-mm-diameter sphere. Take the junction’s properties as: k of 32 W/m K, density of 8.2 kg/m^3, c of 300 J/Kg K. On its surface, the overall heat transfer coefficient is 200 W/m^2 K. Neglect any conduction loss from the sphere to other parts of the thermocouple. Create a plot of measurement error as a function of time for the thermocouple, expressed as a fraction of the initial temperature difference.