Coagulation aided sedimentation produces 135m³ of sludge per day. The solidcontent of sludge is 1% by weight and specific gravity of sludge solid is 2.7. If 20my of suspended solids are removed from the raw water by the Al(OH)3precipitate formed, and flow through the treatment plant is 40 MLD, then the amountof alum required per day in kg is

Answered: Image /qna-images/answer/f06ad509-8728-4f0f-af33-39b009f20dc9.jpg

3 Coagulation aided sedimentation produces 135m of sludge per day. The solid content of sludge is 1% by weight and specific gravity of sludge solid is 2.7. If 20 m of suspended solids are removed from the raw water by the Al(OH)3 precipitate formed, and flow through the treatment plant is 40 MLD, then the amount of alum required per day in kg is

3 Coagulation aided sedimentation produces 135m of sludge per day. The solid content of sludge is 1% by weight and specific gravity of sludge solid is 2.7. If 20 m of suspended solids are removed from the raw water by the Al(OH)3 precipitate formed, and flow through the treatment plant is 40 MLD, then the amount of alum required per day in kg is

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Two wastewater streams A and B, having an identical ultimate BOD are getting mixed to form the stream C. The temperature of the stream A is 20 °C and the temperature of the stream C is 10 °C. It is given that • The 5-day BOD of the stream A measured at 20 °C=50 mg/l • BOD rate constant (base 10) at 20 °C-0.115 per day Temperature coefficient = 1.135 The 5-day BOD (in mg/l, up to one decimal place) of the stream C, calculated at 10 °C, is ●
A- An industrial wastewater stream flows at a rate of 13500 m³/d containing 100 mg/L. Suspended solids, ferric sulfate [Fe(SO4)] is used as a coagulant' at a dose of 50 mg/L. a) Assuming that there is very little in water, what is the daily lime dose? b) If the sedimentation tank removes 90% of the inlet solids, what is the daily solids production from the sedimentation tank?
wet sludge contains 3% solid by weight is pumped to a filter belt press at the rate of 170,000lb/day. the dewatered sludge is 18% by dry weight and the filtrate has total nitrogen concentration of 100 mg/l as nitrogen. assume the belt press has 100% solid capture and specific gravity of the sludge in all forms is 1. Calculate the amount of nitrogen (lb/day) in the filtrate returned? a) 4 b) 9 c) 14 d) 19
Muni.waste.
A waste sludge flow of 40 m³/day is gravity thickened in a circular tank with a diameter of 6.8 m. The solids concentration is increased from 4.5% to 7.5% with 85% suspended- solids capture. Calculate the solids loading in kg/m² d and the quantity of thickened sludge in m³/d.
A complete mix activated sludge process is to be used for biological treatment. This plant receives 10,000 m³ of wastewater per day with BOD loading of 250 mg/L. The primary treatment efficiency is 25%. Assume the followings: ● ● -4- Plant effluent BOD5 = 12 mg/L Biomass yield = 0.54 kg biomass / kg BOD Endogenous decay rate=0.05 day-¹ Solids Retention Time = 8 days MLVSS concentration in the aeration tank = 2,700 mg/L Waste and recycle solids concentration = 12,000 mg/L Determine the followings: (i). The hydraulic detention time in hours. (ii). The aeration tank volume in cubic meters. ...4/- SULIT EAP582
Q2-) The waste flow 18000 m³/day is treated by activated sludge process to reduce 97.5% of influent BODS proce concentration of 250 mg/L. The ratio of formed cell mass and substrate utilized mass are 0.4 and 0.8, respectively, MLVSS = 3500 mg/L, return sludge (Xr) = 8000 mg/L, decay growth rate = 0.05, and 8c = 10 days. Find the following: 1. Reactor volume and hydraulic retention time. 3. The daily amount of wasted sludge. 5. Food to microorganisms' ratio. 2. The volumetric organic loading 4. The recycle ratio, and treatment efficiency.
Q-The MLSS concentration in an aeration tank is 2000 mg/l and the sludge volume after 30 minutes of setting in a 1000 ml graduated cylinder is 175 ml. Find the value of sludge density index (SDI).
. A water plant with a flow of 20,000 m³/day uses 25 mg/L alum as Al,SO, 18H₂O. The sludge produced consists of the alum precipitates plus 20 mg/L of other material removed by the process. Determine the dry mass of sludge produced per day.
Q2-) The waste flow 18000 m'/day is treated by activated sludge process to reduce 97.5% of influent BOD, concentration of 250 mg/L. The ratio of formed cell mass and substrate utilized mass are 0.4 and 0.8, respectively, MLVSS = 3500 mg/L, return sludge (Xr) = 8000 mg/L, decay growth rate= 0.05, and 0 = 10 days. Find the following: 1. Reactor volume and hydraulic retention time. 3. The daily amount of wasted sludge. 5. Food to microorganisms' ratio. 2. The volumetric organic loading 4. The recycle ratio, and treatment efficiency.
Note: If you don't know the solution please leave it but don't give me wrong solution. Thank you
Subject environmental engineering solve question 10